Introduction
This manual provides essential information for the safe and effective use of your PUROSUR Replacement 10.8V Charger. This charger is designed specifically for select Bissell cordless vacuum models. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to the charger or your device.
Image: The PUROSUR 10.8V Replacement Charger, showing the power adapter and the two-prong connector, alongside a compatible Bissell vacuum. This image illustrates the complete product and its intended use.
Compatibility
This charger is specifically designed for the following Bissell 10.8V Lithium-Ion cordless vacuum models:
- Bissell Pet Hair Eraser Lithium-Ion Cordless Hand Vacuum Model 2389
- Bissell Adapt Ion Pet 2-in-1 Cordless Vacuum Models 2286A, 2286, 22862
- Bissell Power Lifter Ion Pet 2-in-1 Cordless Vacuum Model 2482
Image: Visual representation of compatible Bissell vacuum models, including the Pet Hair Eraser, Adapt Ion Pet 2-in-1, and PowerLifter Ion Pet 2-in-1 vacuums, with their respective model numbers.
Important Compatibility Notes:
- This charger is NOT compatible with Bissell Pet 2390A #2390.
- This charger is NOT compatible with 14.4V and 14V BISSELL Powerlifter 3139 versions.
- Ensure your vacuum's voltage matches the charger's 10.8V specification.
Image: Two Bissell vacuum models, specifically the 2390 and 2390A, marked with a red 'X' to clearly indicate their incompatibility with this charger.
Product Features
- Input: 100-240V AC, 50-60Hz (Universal Voltage)
- Output: DC 5~23V, 300mA
- Cord Length: 6.6 feet (2 meters) for extended reach
- Safety Certifications: Conforms to CE, FCC, and RoHS standards
- Built-in Protection: Features surge protection, over-current protection, over-voltage protection, short-circuit protection, and over-temperature protection for safe charging.
- Connector Type: Two-prong connector designed for compatible Bissell models.
Image: A close-up view of the charger's two-prong connector, highlighting its design for precise fit with compatible vacuum charging ports.
Setup Instructions
- Unpack the Charger: Carefully remove the charger from its packaging. Inspect it for any visible damage.
- Identify the Charging Port: Locate the charging port on your compatible Bissell cordless vacuum. This is typically a two-hole port.
- Connect the Charger: Insert the two-prong connector of the PUROSUR charger firmly into the charging port of your vacuum. Ensure a snug fit.
- Plug into Power Outlet: Insert the AC plug of the charger into a standard 100-240V wall outlet.
- Verify Connection: Some vacuum models may have an indicator light that illuminates when charging. Refer to your vacuum's manual for specific charging indicators.
Operating Instructions
Once the charger is properly connected to your vacuum and a power outlet, the charging process will begin automatically. The charger is designed to provide a stable and safe power supply for your vacuum's lithium-ion battery.
- Charging Time: Charging time will vary depending on the battery level of your vacuum. Refer to your vacuum's original user manual for estimated charging times.
- Overcharge Protection: The charger includes built-in overcharge protection to prevent damage to your vacuum's battery. It is safe to leave the vacuum connected to the charger once fully charged, though it is generally recommended to disconnect it once charging is complete.
- Temperature Considerations: For optimal charging, use the charger in a well-ventilated area at room temperature. Avoid charging in extremely hot or cold environments.
Maintenance
- Cleaning: Disconnect the charger from the power outlet and the vacuum before cleaning. Wipe the charger with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and moisture. Avoid wrapping the cord too tightly around the charger.
- Inspection: Periodically inspect the charger cord and plug for any signs of damage, such as fraying, cuts, or bent prongs. If damage is observed, discontinue use immediately and replace the charger.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum not charging. |
|
|
| Charger feels warm during use. | Normal operation. | A slight warmth is normal during charging. If the charger becomes excessively hot or emits a burning smell, disconnect it immediately and contact support. |
| Charger light (if present on vacuum) not indicating charge. |
|
|
Specifications
- Model Number: 1616326 (ZD5F230030US)
- Input: 100-240V AC, 50-60Hz
- Output: DC 5~23V, 300mA
- Wattage: 3.24 watts
- Amperage: 0.3A
- Cord Length: 6.6 ft (2 meters)
- Color: Black
- Product Dimensions: 2 x 3 x 4 inches
- Item Weight: 2.39 ounces
- Certifications: CE, FCC, RoHS
Warranty and Support
This PUROSUR Replacement Charger comes with a One Year Risk Free Warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your charger, please contact PUROSUR customer service through the retailer where the product was purchased or refer to the contact information provided with your product packaging.
Please have your product model number (1616326) and purchase details ready when contacting support.