JAYEGT LED Light Base Rotating Display Stand 16.5inch User Manual

Introduction

This manual provides detailed instructions for the JAYEGT LED Light Base Rotating Display Stand, model 42-light (16.5inch). Please read this manual thoroughly before use to ensure proper operation and to understand all features and safety precautions.

Safety Precautions

• Place the rotary table in a location inaccessible to children.
• Do not store or use this product in environments with splashing water, rain, high humidity, or heavy mist. Such conditions may cause product damage or power short circuits.
• Avoid touching the power supply area with wet hands to prevent electric shock.
• This product is an electrical appliance and is not fire-resistant or heat-resistant.
• Unauthorized dismantling or modification of the product will void any after-sales support.
• If the rotary table fails to operate, first verify that it is receiving power.

Package Contents

Upon opening the package, please verify that all the following items are included:

Figure 1: Package Contents - The image displays the retail box, the light turntable, remote controller, power adapter, and user manual.

• Light Turntable x 1
• Remote Controller x 1
• Power Adapter x 1
• User Manual x 1

Product Features

• Dimensions & Load Capacity: 16.5 inch (42cm) diameter with a maximum load of 110 lbs (50KG). Suitable for displaying large items.
• Integrated LED Lighting: Features three light display modes (white, yellow, yellow-white) with remote control for color selection and intensity adjustment.
• High-Quality Construction: Made from ABS and acrylic panel, utilizing a high-quality conductive panel to prevent screen flicker during video recording.
• 360-Degree Rotation: Offers full 360-degree rotation controlled via remote.
• Directional Control: Supports both clockwise and counter-clockwise rotation.
• Rotation Modes: Provides continuous and intermittent rotation options.
• Angle Circulation: Includes 45°, 90°, and 180° angle circulation modes with position memory.
• Adjustable Speed: Rotation speed is adjustable from 20 to 60 seconds per cycle.
• Low Noise Operation: Designed with an ultra-low noise motor (≤55db) to ensure smooth operation without disturbing video shooting or daily activities.

Product Overview

Familiarize yourself with the components of your JAYEGT Rotating Display Stand:

Figure 2: Turntable Components - This diagram labels the key parts of the display stand, including the rotary table, power input, and control elements.

• Rotary Table: The top surface where items are placed for display.
• ON/OFF Switch: Controls the main power to the unit.
• Power Jack (DC5.5/2.5): Input for the power adapter.
• Infrared Receiver Hole: Receives signals from the remote control.
• Power Indicator: Illuminates when the unit is powered on.
• Base: The stable foundation of the display stand.

Setup

Follow these steps to set up your display stand:

1. Placement: Place the rotary table on a stable, flat, and level surface to ensure smooth operation and prevent tipping.
2. Connect Power: Insert the power adapter's DC plug into the Power Jack (DC5.5/2.5) located on the base of the turntable.
3. Plug In: Connect the power adapter to a standard AC 100V-240V electrical outlet.
4. Power On: Flip the ON/OFF switch on the base to the "ON" position. The Power Indicator light will illuminate, indicating the unit is ready for use.

Figure 3: Power Connection and Remote - This image demonstrates connecting the power adapter and shows the remote control used for operation.

Operating Instructions

Remote Control Functions

The display stand is operated using the provided remote control. Ensure the remote is pointed towards the infrared receiver on the turntable for optimal response.

Figure 4: Remote Control Layout - This image details the buttons and their corresponding functions on the remote control.

• Start/Pause: Initiates or halts the rotation.
• Turn Right / Turn Left: Changes the direction of rotation.
• Accelerate / Decelerate: Adjusts the rotation speed.
• Resume Continuous Rotation: Sets the turntable to rotate continuously.
• Intermittent Rotation: Activates rotation with programmed pauses.
• Multi-angle Back and Forth Rotation: Cycles through predefined angles (45°, 90°, 180°).
• Switch Light Color: Cycles through white, yellow, and yellow-white LED light modes.
• Turn Up/Down the Lights: Adjusts the brightness of the LED lights.
• Store Current Position: (Note: This function is typically available on charging models only.)

Light Control

• To change the light color, press the "Switch light color" button on the remote. The light will cycle between white, yellow, and a combination of yellow and white.
• To adjust the brightness, use the "Turn up the lights" and "Turn down the lights" buttons.

Rotation Control

• Press the "Start/pause" button to begin or stop the turntable's rotation.
• To change the rotation direction, press "Turn right" or "Turn left".
• Select "Resume continuous rotation" for uninterrupted movement.
• Choose "Intermittent rotation" for rotation with programmed pauses.
• For specific angular movements, select "Multi-angle back and forth rotation" to cycle through 45°, 90°, or 180° angles.
• Adjust the rotation speed using the "Accelerate" and "Decelerate" buttons. The speed can be set between 20 and 60 seconds per full cycle.

Figure 5: Multi-Angle Rotation - This diagram visually explains the different rotation angles available for precise display.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your display stand:

• Cleaning: Wipe the display stand with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the surface or electronic components.
• Power Adapter: Regularly inspect the power adapter and cables for any signs of damage, fraying, or exposed wires. Discontinue use if damage is found and replace with an authorized adapter.
• Storage: When not in use, store the unit in a dry, dust-free environment away from direct sunlight and extreme temperatures.
• Load Capacity: Always adhere to the maximum load capacity of 110 lbs (50KG) to prevent motor strain and potential damage.

Troubleshooting

If you encounter issues with your JAYEGT Rotating Display Stand, refer to the following common problems and solutions:

• Turntable Does Not Rotate:
  • Ensure the power adapter is securely connected to both the turntable's power jack and a functional electrical outlet.
  • Verify that the ON/OFF switch on the base is in the "ON" position and the power indicator light is illuminated.
  • Check if the remote control batteries need replacement (if applicable, though this model is wired for power).
• LED Lights Do Not Work:
  • Confirm the turntable is powered on.
  • Use the remote control to switch light colors and adjust brightness settings.
• Remote Control Not Responding:
  • Ensure there are no obstructions between the remote control and the infrared receiver on the turntable.
  • Check the remote control batteries and replace them if necessary.
• Excessive Noise During Operation:
  • Verify that the total weight of the item on the turntable does not exceed the maximum load capacity of 110 lbs (50KG).
  • Ensure the turntable is placed on a flat, stable, and level surface. Uneven surfaces can cause vibrations and noise.

Specifications

Figure 6: Product in Use - Examples of various items displayed on the rotating stand.

Support Information

For any questions, concerns, or technical assistance regarding your JAYEGT LED Light Base Rotating Display Stand, please contact our customer support. We are committed to providing professional and heartfelt service.

Please note that the manufacturer reserves the right to modify product features and descriptions without prior notice due to continuous product improvement.