Introduction
The Ciniffo Flying Orb Ball Toy (Model TSM006-B) is a hand-controlled, light-up mini drone designed for interactive play. Its spherical design and powerful internal engine allow for various flight modes based on aviation principles. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
Safety Information
CHOKING HAZARD -- Small parts. Not for children under 3 years. The toy flying ball contains small parts that may pose a choking hazard. Adult supervision is required. Keep away from children under 3 years old.
This hover ball features a dense mesh and full coverage design, constructed from non-toxic, high-quality ABS material, making it flexible, light, and impact-resistant. For added safety, the toy includes intelligent protection that automatically stops flight if it collides with a wall or other objects.
Recommended age: 6 years and up.
What's in the Box
- Ciniffo Flying Orb Ball Toy (Model TSM006-B)
- USB Charging Cable
- Instruction Manual
Setup
1. Charging the Orb Ball
Locate the USB charging port on the orb ball. Connect the provided USB charging cable to the orb ball and a compatible USB power source. The orb ball is equipped with a Lithium Polymer battery and typically charges fully in approximately 25 minutes. A full charge supports about 30 minutes of discontinuous operation or 8-10 minutes of continuous flight.
2. Powering On/Off
To power on the orb ball, locate the small power button. Press the button to activate the device. The LED lights will illuminate. To initiate flight, hold the orb ball with the "UP" sign facing upwards, then gently shake it. The internal engine will start. To stop playing, simply shake the orb ball again to halt the spinning.
Image: The Ciniffo Flying Orb Ball Toy, showcasing its spherical design and LED lights.
Operating Instructions
The Ciniffo Flying Orb Ball offers a variety of flight modes controlled by hand gestures and the angle of launch. Experiment with different angles to discover new flight paths and tricks.
General Operation
Video: Demonstration of the Flying Orb Ball's general operation and hand-controlled flight.
Flight Modes
- Straight Flight: Hold the flying spinner horizontally and vertically to the ground. Tilt it downwards between 15° to 45° and throw it. The orb will fly straight in the direction it is thrown. This mode is suitable for multiplayer games, passing the ball back and forth.
- Boomerang Flight: Hold the flying orb horizontally and vertically to the ground. Tilt it upwards between 15° to 45° and throw it out. The flying toy will curve and return to your hand in the original direction.
- Turning Flight: Hold the boomerang ball horizontally and vertically to the ground. Tilt it 15° to 45° to the upper left or upper right and throw it out. The magic ball will fly out in an offset direction and then fly back to another target position along the offset direction.
- Hover Ball: Hold the floating ball horizontally and vertically to the ground. Release the rotating fly orb, then place your palm 1cm-5cm below it and move slowly. The fly ball will float in the air and move slowly with your palm, creating a magical hovering effect.
Video: Demonstration of the Flying Orb Ball's boomerang flight capability.
Image: A person demonstrating the hover flight of the Ciniffo Flying Orb Ball.
Maintenance
To ensure the longevity and optimal performance of your Ciniffo Flying Orb Ball, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to gently wipe the surface of the orb ball. Avoid using harsh chemicals or abrasive materials, as these can damage the product.
- Storage: Store the orb ball in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage to maintain battery health.
- Inspection: Periodically inspect the mesh cage and internal components for any signs of damage or wear. Discontinue use if significant damage is observed.
Troubleshooting
| Problem | Solution |
|---|---|
| Orb Ball does not fly or has weak flight. | Ensure the battery is fully charged (approx. 25 minutes). Check for any obstructions in the propellers. Confirm the "UP" sign is facing upwards when initiating flight. |
| Orb Ball stops flying unexpectedly. | The intelligent protection feature automatically stops the orb ball if it collides with a wall or other objects. This is normal operation. Restart by shaking it gently. |
| LED lights are not working. | Check if the orb ball is powered on. If the issue persists after charging, contact customer support. |
Specifications
- Product Dimensions: 3.94 x 3.94 x 3.94 inches
- Item Weight: 4.6 ounces
- Item Model Number: TSM006-B
- Manufacturer Recommended Age: 6 years and up
- Batteries: 1 Lithium Polymer battery required (included)
- Manufacturer: DONGGUAN TESIMAI ELECTRONIC TECHNOLOGY CO,LTD
Warranty & Support
The Ciniffo Flying Orb Ball Toy comes with a 1-Year Worry-Free Guarantee. For any questions, technical assistance, or support, please contact our 24/7 Expert Support team at USToy-service@outlook.com.