Little Bo Baby Bottle Steamer and Dryer (Model WX-968G) Instruction Manual

1. Introduction

Thank you for choosing the Little Bo Baby Bottle Steamer and Dryer. This appliance is designed to sterilize and dry baby bottles and accessories, providing a hygienic environment for your baby's feeding items. Please read this manual thoroughly before use to ensure safe and proper operation. Keep this manual for future reference.

Important Safety Information

• Always place the appliance on a stable, heat-resistant surface.
• Do not immerse the base unit in water or other liquids.
• Keep out of reach of children.
• Use only distilled water for sterilization to prevent mineral buildup.
• Ensure the appliance is unplugged before cleaning or when not in use.
• Do not operate the appliance if the power cord or plug is damaged.
• Allow the appliance to cool completely before handling or storing.

2. Product Overview

The Little Bo Baby Bottle Steamer and Dryer is a versatile 5-in-1 appliance designed for sterilizing and drying baby feeding items. It features a simple one-dial control for ease of use.

Key Features:

• 5-in-1 Functionality: Offers Sterilizing only, Drying only, Sterilizing + Rapidly Drying, Sterilizing + Thoroughly Drying, and 72-hour storage modes.
• User-Friendly Design: Simple one-dial mechanical knob for operation.
• Large Capacity: Accommodates up to 12 baby bottles or a variety of pump parts, pacifiers, and other accessories.
• Effective Sterilization: Utilizes 360° steam cleaning to maintain a clean environment for over 72 hours.
• Safe Materials: Constructed from food-grade PP and features a stainless steel bottom plate.
• Quiet Operation: Designed to operate with minimal noise.
• Auto-off & Boil-Dry Protection: Automatically powers off upon cycle completion and includes protection against boiling dry.

Components Diagram:

This diagram illustrates the main components of the Little Bo Baby Bottle Steamer and Dryer, including the top lid, upper basket, lower basket, water reservoir, grip, function knob/timer, measuring cup, polyester filter cloth, and instructions.

The main unit of the Little Bo Baby Bottle Steamer and Dryer, shown with baby bottles and nipples placed inside for processing.

3. Setup

Unpacking and Initial Cleaning:

1. Carefully remove all components from the packaging.
2. Wash the baskets, lid, and other removable parts with warm soapy water. Rinse thoroughly and allow to air dry.
3. Wipe the base unit with a damp cloth. Do not immerse the base unit in water.

Assembly:

1. Place the lower basket onto the base unit.
2. If using, place the upper basket on top of the lower basket.
3. Position the lid securely on top of the upper basket.

Visual guide for initial setup: 1. Add 180ml of distilled water to the reservoir. 2. Place bottles, nipples, pacifiers, and other items in the basket. 3. Plug in and turn the knob to start.

4. Operation

The appliance features a single mechanical knob for selecting different modes and starting the cycle.

Operating Modes:

The 5-in-1 functionality includes options for sterilizing only, drying only, combined sterilizing and rapid drying, combined sterilizing and thorough drying, and a 72-hour storage feature.

• Sterilizing Only: Uses 180ml of water for approximately 17 minutes.
• Drying Only: No water needed, duration varies (e.g., 30, 40, 50 minutes).
• Sterilizing + Rapidly Drying: Uses 180ml of water, followed by a shorter drying cycle.
• Sterilizing + Thoroughly Drying: Uses 180ml of water, followed by a longer drying cycle.
• 72-Hour Storage: Maintains a sterile environment for up to 72 hours after a sterilization cycle.

General Usage Steps:

1. Ensure the appliance is clean and assembled correctly.
2. Pour 180ml of distilled water into the heating plate reservoir for sterilization cycles. For drying-only cycles, no water is needed.
3. Place clean baby bottles, nipples, pacifiers, and other accessories upside down onto the racks in the baskets. Ensure items do not block the steam vents.
4. Secure the lid.
5. Plug the appliance into a power outlet.
6. Turn the mechanical knob to select the desired function (e.g., Sterilizing + Thoroughly Drying). The appliance will begin operation.
7. Once the cycle is complete, the appliance will automatically shut off. Allow items to cool before removing.

Operation Videos:

5. Maintenance

Cleaning:

1. Always unplug the appliance and allow it to cool before cleaning.
2. Wash the baskets and lid with warm soapy water.
3. Wipe the exterior of the base unit with a damp cloth. Do not use abrasive cleaners.
4. For the heating plate, wipe the interior with a soft cloth. Ensure the sterilizer is completely dry before storage.

Descaling:

Mineral deposits (scale) may accumulate on the heating plate over time, especially if tap water is used. Descaling is recommended regularly to maintain performance.

• Method 1 (Vinegar): Add one part white vinegar and one part hot water (below 120°F) to the water reservoir. Allow the mixture to soak until the scale is dissolved.
• Method 2 (Citric Acid): Add hot water (below 140°F) and citric acid to the sterilizer. Allow the mixture to soak until the scale is dissolved.

After descaling, empty the sterilizer and clean with water. Brush the bottom and rim of the heating plate if necessary. Wipe the interior with a soft cloth and allow to dry completely.

Filter Replacement:

The appliance uses a polyester filter for the drying function. Two pieces of polyester filter cloth are included for replacement.

Steps for replacing the polyester filter: 1. Remove the filter cover. 2. Remove the old filter. 3. Insert a new polyester filter cloth. 4. Replace the filter cover.

6. Troubleshooting

7. Specifications

8. Warranty and Support

Warranty Information:

The Little Bo Baby Bottle Steamer and Dryer (Model WX-968G) comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

Customer Support:

For any questions, troubleshooting assistance, or warranty inquiries, please contact Little Bo Baby customer support. Refer to the product packaging or the official Little Bo Baby website for the most current contact information.