1. Product Overview
The JEWHITENY 120W UV LED Nail Lamp (Model SUNX PLUS) is designed for efficient and professional curing of various gel nail polishes. It features a dual-channel light source with 36 LED beads, offering fast and uniform curing. The lamp includes smart auto-sensing and multiple timer settings for user convenience.
Image 1: Front view of the JEWHITENY 120W UV LED Nail Lamp, showcasing its sleek design and digital display.
Image 2: Underside view of the nail lamp, highlighting the arrangement of the 36 LED and UV dual light source beads for comprehensive curing.
2. Safety Precautions
- Read all instructions before using the appliance.
- Do not expose the lamp to water or other liquids.
- Do not look directly into the UV/LED light during operation to avoid eye strain.
- Keep out of reach of children.
- Unplug the device when not in use or before cleaning.
- Use only the provided power adapter.
- Do not attempt to repair the device yourself. Contact customer support for assistance.
3. Setup
- Unpack: Carefully remove the nail lamp and all accessories from the packaging.
- Inspect: Check the device for any signs of damage. If damaged, do not use and contact customer support.
- Connect Power: Insert the power adapter into the DC input port on the back of the lamp. Plug the other end of the adapter into a suitable electrical outlet.
- Placement: Place the lamp on a stable, flat surface. Ensure adequate ventilation around the device.
4. Operating Instructions
4.1 Power On/Off
Once connected to power, the lamp is in standby mode. There is no separate power button; the lamp activates upon hand insertion or timer selection.
4.2 Timer Settings
The lamp offers four preset timer settings to accommodate different gel polish types and curing requirements. Press the corresponding button on the top of the lamp to select a timer.
- 10s: For regular color or thick gel polish.
- 30s: Recommended for base coat or color gel.
- 60s: Suitable for top coat or acrylic gel.
- 99s: Low heat mode, ideal for sensitive nails or for a gradual curing process to minimize heat spikes.
Image 3: Close-up of the lamp's control panel, illustrating the 10s, 30s, 60s, and 99s timer buttons and their recommended uses.
4.3 Automatic Sensor
The lamp is equipped with an infrared automatic sensor. When a hand or foot is inserted into the lamp without a timer selected, the lamp will automatically turn on and begin curing. The digital display will show the elapsed time. Removing the hand or foot will turn off the lamp.
4.4 Curing Process
- Prepare nails by cutting, filing, and applying a thin layer of gel polish. Avoid contact with cuticles or skin.
- Place your hand or foot into the lamp.
- Select the appropriate timer setting (10s, 30s, 60s, or 99s) based on the gel polish instructions, or allow the automatic sensor to activate.
- The lamp will turn off automatically once the selected timer expires, or when the hand/foot is removed in auto-sensing mode.
- Repeat for subsequent layers of gel polish as needed.
Note: This UV LED nail lamp is designed for curing all types of gel polishes (base coat, color gel, top coat, hard gels, builder, acrylic, sculpture gel, gem glue). It is not suitable for regular nail polish.
Image 4: Illustration of the gel polish application process before using the nail lamp for curing.
5. Maintenance
- Cleaning: Disconnect the power adapter before cleaning. Wipe the surface of the lamp with a soft, dry cloth. For stubborn stains, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device.
- Storage: Store the lamp in a cool, dry place away from direct sunlight and moisture when not in use.
- LED Beads: The LED beads have a lifespan of approximately 50,000 hours and do not require replacement under normal use.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power adapter not connected properly or power outlet issue. | Ensure the power adapter is securely plugged into both the lamp and a working electrical outlet. Try a different outlet. |
| Gel polish is not curing. | Incorrect curing time, too thick a layer of polish, or using regular nail polish. |
|
| Lamp turns off unexpectedly. | Hand/foot removed from sensor area or overheating protection activated. | Ensure continuous placement of hand/foot during curing. If overheating is suspected, unplug and allow the device to cool down before resuming use. |
7. Specifications
- Model: SUNX PLUS
- Power: 120W
- Light Source: UV + LED Dual Light Source
- LED Beads: 36 PCS
- Lifespan: Approximately 50,000 hours
- Timer Settings: 10s, 30s, 60s, 99s (Low Heat Mode)
- Sensor: Automatic Infrared Sensor
- Dimensions: 9.29" (D) x 8.26" (W) x 4.33" (H)
- Weight: 15.84 ounces (approximately 449 grams)
- Material: Acrylic
- Color: White
Image 5: Diagram showing the dimensions of the JEWHITENY 120W UV LED Nail Lamp: 9.29 inches deep, 8.26 inches wide, and 4.33 inches high.
8. Warranty and Support
8.1 Warranty Information
JEWHITENY offers a 12-month warranty for quality-related issues from the date of purchase. Customers are eligible for a full refund within 1 month of purchase under certain conditions. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, please retain your proof of purchase.
8.2 Customer Support
For any questions, concerns, or technical assistance, please contact JEWHITENY customer support. Life-long maintenance services are also provided.
Please visit the official JEWHITENY store for more information: JEWHITENY Official Store