1. Introduction
This manual provides instructions for the Toyota Genuine USB/HDMI Connection Cable Input Terminal, Part Number 086B0-00010. This cable allows for the connection of external devices via USB and HDMI to compatible Toyota car navigation systems, enabling display mirroring from smartphones or playback of media content.
It is designed for seamless integration into your vehicle's existing switch panel, provided the correct dimensions are met.
2. Product Overview
The product includes the main USB/HDMI connection cable and an installation guide for specific vehicle models. The cable features a dedicated connector for the navigation unit and a combined USB/HDMI input terminal for user access.
Figure 1: Contents of the package, including the USB/HDMI cable, instruction manual, and additional components.
Figure 2: The USB/HDMI connection cable neatly coiled within its sealed packaging.
Figure 3: Detail of the user-facing USB and HDMI input ports on the cable terminal.
Figure 4: The connector end of the cable that connects to the car navigation system, featuring a multi-pin connector and a distinct green USB connector.
3. Compatibility
This USB/HDMI connection cable (Part No. 086B0-00010) is compatible with the following Toyota genuine navigation systems:
- NSZT-Y68T
- NSZT-W68T
- NSZN-Z68T
- NSZT-Y66T
- NSZT-W66T
- NSZN-Z66T
Important: Before purchasing or installing, it is crucial to verify the compatibility by checking the rear of your specific navigation unit. Some units, even within the listed models, may not support USB installation or may have different connector types. This product features a green-colored USB connector for the navigation unit connection.
4. Setup and Installation
Installation of this cable requires access to the rear of your car navigation system and a suitable opening in your vehicle's dashboard or console for the input terminal.
- Verify Compatibility: As noted in Section 3, confirm that your navigation system has the necessary ports and supports this specific USB/HDMI cable. Pay attention to the green USB connector type.
- Prepare the Installation Location: Identify an available switch panel hole in your vehicle. The required dimensions for the switch panel hole are 23mm (width) x 33mm (height) for a Type A panel.
- Connect to Navigation Unit: Carefully connect the multi-pin connector and the green USB connector from the cable to the corresponding ports on the rear of your Toyota navigation system. Ensure all connections are secure.
- Route the Cable: Route the cable from the navigation unit to your chosen switch panel location, ensuring it does not interfere with vehicle operation or safety systems.
- Install Input Terminal: Insert the USB/HDMI input terminal into the prepared switch panel hole until it clicks securely into place.
- Test Functionality: After installation, reassemble your dashboard/console and test the USB and HDMI functions with a compatible external device.
An original installation manual for 30 series Alphard and Vellfire models is included to assist with specific vehicle installations.
Figure 5: Diagram illustrating the required dimensions for the Type A switch panel hole (23mm x 33mm) for proper installation of the input terminal.
5. Operation
Once the USB/HDMI connection cable is successfully installed, you can utilize its functions:
- USB Connection: Connect USB devices such as flash drives for media playback (if supported by your navigation system) or for charging compatible devices.
- HDMI Connection: Connect HDMI-enabled devices, such as smartphones (with appropriate adapters, not included), to mirror their screen content onto your navigation display. This allows for viewing videos, navigation apps, or other content from your device on the larger screen.
Refer to your car navigation system's main instruction manual for specific details on how to select USB or HDMI input sources and control playback or display settings.
6. Maintenance
The Toyota Genuine USB/HDMI Connection Cable requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the USB and HDMI ports clean and free from dust or debris. Use a soft, dry cloth for cleaning.
- Avoid applying excessive force when connecting or disconnecting devices to prevent damage to the ports or cable.
- Ensure the cable is not kinked, pinched, or exposed to extreme temperatures.
7. Troubleshooting
If you encounter issues with your USB/HDMI connection cable, consider the following:
- No Signal/Display:
- Ensure the cable is securely connected to both the navigation unit and the external device.
- Verify that the correct input source (USB or HDMI) is selected on your navigation system.
- Test with a different USB or HDMI device to rule out issues with the external device or its adapter.
- Confirm that your navigation system's software is up to date.
- USB Device Not Recognized:
- Check the file format of the media on your USB device; your navigation system may only support specific formats.
- Ensure the USB device is functioning correctly.
- Installation Difficulties:
- Re-verify the compatibility of your navigation unit with the cable, especially checking the rear connectors.
- Confirm the dimensions of your switch panel hole match the required 23mm x 33mm (Type A).
Note: Claims regarding installation difficulties or incompatibility after purchase will not be accepted. Always confirm compatibility prior to installation.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | USB/HDMI Connection Cable Input Terminal |
| Brand | Toyota Genuine |
| Part Number | 086B0-00010 |
| Compatible Devices | GPS Navigation Systems (e.g., NSZT-Y68T, NSZT-W68T, NSZN-Z68T, NSZT-Y66T, NSZT-W66T, NSZN-Z66T) |
| Connector Type | HDMI, USB |
| Cable Shape | HDMI |
| USB Connector Color (Navigation Side) | Green |
| Switch Panel Hole Dimensions | 23mm (Width) x 33mm (Height) - Type A |
9. Warranty and Support
This product is a Toyota Genuine part. For warranty information, please refer to the official Toyota warranty policy provided with your vehicle or contact an authorized Toyota service center. Specific product support for installation or technical issues should be directed to an authorized Toyota dealer or service professional.
Please note that serial numbers are recorded to prevent product substitution. Claims related to installation difficulties or incompatibility are not accepted if the product is not suitable for your specific navigation unit after purchase, as verification is the responsibility of the customer.