Bulatry BMi07
Bulatry Wireless Mini Lavalier Lapel Microphone User Manual
Model: BMi07
Introduction
This user manual provides comprehensive instructions for the Bulatry 2 Pack Wireless Mini Lavalier Lapel Microphone. It covers product features, setup, operation, maintenance, troubleshooting, and technical specifications. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Package Contents
The package includes all necessary components for immediate use. Please verify that all items listed below are present and in good condition upon unboxing.
- 2 x Wireless Microphones
- 1 x Signal Receiver (Lightning and USB-C 2-in-1 connector)
- 1 x Charging Cable
- 1 x User Manual
Product Overview
The Bulatry Wireless Mini Lavalier Lapel Microphone system is designed for high-quality audio capture, especially for two-person recordings. It features a compact design and advanced noise reduction technology.
Figure 1: Overview of the wireless microphones and receiver.
Figure 2: High-sensitive omnidirectional microphone and intelligent noise reduction chip.
Key Features:
- Dual Wireless Microphones: Supports simultaneous sound pickup from two sources.
- Plug & Play: No adapter, additional app, or Bluetooth pairing required.
- Noise Reduction: Built-in chip for crystal clear audio (44.1~48kHz stereo CD quality).
- Long Range: Effective audio range up to 65 feet (20 meters).
- Extended Battery Life: Over 6 hours of working time per microphone, 1 hour for full charge.
- Wide Compatibility: Compatible with Apple (Lightning) and Android (USB-C) devices.
Setup
Setting up your Bulatry wireless microphone system is straightforward. Follow these steps for quick and easy connection.
- Connect the Receiver: Plug the signal receiver into the Lightning or USB-C port of your iPhone/iPad or Android device. The "Y" shape dual connector allows connection even with a protective case on your device.
Figure 3: Plugging the receiver into your smartphone.
- Power On Microphones: Press the power button on each wireless microphone. The microphones will automatically connect to the receiver. A green indicator light on the microphone will confirm successful connection.
Figure 4: Simple plug and play operation.
- Begin Recording: Once connected, the system is ready to pick up sound. Open your desired recording application (e.g., camera app, voice recorder, social media app) and begin recording.
Compatibility:
The receiver is designed with a dual Lightning and USB-C connector for broad compatibility.
Figure 5: Device compatibility chart.
Operating Instructions
The Bulatry wireless microphones are ideal for various content creation scenarios, especially those involving two speakers.
Recording with Two Microphones:
The system allows both microphones to record simultaneously, making it perfect for interviews, vlogs, and live streams with multiple participants.
Figure 6: Ideal for two-person sound pickup.
Optimal Placement:
For best audio quality, clip the microphone to your lapel or collar, approximately 6-8 inches (15-20 cm) from your mouth. Ensure the microphone is not covered by clothing.
Supported Platforms:
The system is compatible with various online social media and streaming platforms, including YouTube, TikTok, Facebook Live, and more.
Figure 7: Compatible with popular social media platforms.
Maintenance
Proper maintenance ensures the longevity and performance of your wireless microphones.
- Cleaning: Use a soft, dry cloth to clean the microphones and receiver. Do not use liquid cleaners or solvents.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
- Charging: Charge the microphones using the provided charging cable. Avoid overcharging. The microphones provide over 6 hours of battery life and take approximately 1 hour to fully charge.
Figure 8: Battery life and charging capabilities.
- Handling: Handle the microphones and receiver with care to prevent damage from drops or impacts.
Troubleshooting
If you encounter any issues with your Bulatry wireless microphone system, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume | Microphone not powered on; Receiver not properly connected; Device volume too low; Microphone too far from source. | Ensure microphones are powered on and indicator light is green. Re-plug the receiver firmly into your device. Increase the volume on your recording device. Position the microphone closer to the sound source. |
| Interference or poor audio quality | Out of range; Obstructions between mic and receiver; Strong electromagnetic interference. | Move closer to the recording device (within 65ft/20m). Ensure a clear line of sight between the microphone and receiver. Move away from other electronic devices that may cause interference. |
| Microphone not connecting automatically | Battery low; Temporary connection issue. | Charge the microphone fully. Disconnect and reconnect the receiver, then power cycle the microphones. |
| Short battery life | Microphone not fully charged; Aging battery. | Ensure the microphone is charged for at least 1 hour. If battery life significantly degrades over time, contact customer support. |
Specifications
Detailed technical specifications for the Bulatry Wireless Mini Lavalier Lapel Microphone.
| Feature | Detail |
|---|---|
| Model Name | BMi07 |
| Microphone Form Factor | Lavalier |
| Polar Pattern | Omnidirectional |
| Connectivity Technology | Wireless (Proprietary 2.4GHz) |
| Connector Type | Lightning, USB-C (2-in-1 receiver) |
| Audio Sensitivity | 30 dB |
| Signal-to-Noise Ratio | 70 dB |
| Working Distance | Up to 65 feet (20 meters) |
| Working Time | Over 6 hours |
| Charging Time | Approx. 1 hour |
| Latency | 0.009s (Real-time auto-sync) |
| Power Source | Battery Powered (Lithium Polymer) |
| Item Weight | 0.7 Ounces (per microphone) |
| Material | Plastic |
Figure 9: Battery life and range details.
Warranty and Support
For warranty information and customer support, please refer to the official Bulatry website or contact your retailer. Keep your purchase receipt for warranty claims.
Manufacturer: Bulatry
ASIN: B0B76X39GL
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.