uRage SoundZ 400 Wired Gaming Headset User Manual

1. Introduction

Thank you for choosing the uRage SoundZ 400 Wired Gaming Headset. This manual provides essential information for setting up, operating, and maintaining your headset to ensure an optimal gaming and communication experience. Please read these instructions carefully before use.

2. Product Features

• Full stereo headset designed for gaming.
• Blue illuminating effect on earpads for enhanced aesthetics.
• Adjustable headband and microphone arm for personalized fit.
• Integrated volume control and microphone mute function on the cable.
• Padded fabric earpads for comfort during extended use.
• Extra-long 2.2 meter cable with flexible fabric jacket for durability and kink protection.
• Delivers brilliant bass and clear trebles for immersive audio.

Figure 1: uRage SoundZ 400 Gaming Headset showcasing blue illuminated earpads.

Figure 2: Exploded view illustrating the internal components of the headset speakers, designed for brilliant bass and clear trebles.

3. Setup Instructions

1. Connect the Headset: Locate an available USB Type-A port on your computer or gaming console. Insert the USB plug of the uRage SoundZ 400 headset firmly into the USB port.
2. Driver Installation (Automatic): Your operating system should automatically detect and install the necessary drivers for the headset. This process may take a few moments.
3. Audio Output/Input Selection: Once installed, navigate to your device's sound settings. Select "uRage SoundZ 400" as your primary audio output device (for headphones) and input device (for microphone).
4. Adjust Fit: Adjust the headband to comfortably fit your head. Position the microphone arm to your preferred distance from your mouth for clear communication.

Figure 3: The USB Type-A connector and in-line control for easy connection and management.

4. Operating Instructions

Volume Control

The headset features an in-line control unit on the cable. Use the scroll wheel or dedicated buttons (if present) on this unit to adjust the audio volume up or down. Rotate the wheel upwards to increase volume and downwards to decrease it.

Microphone Mute

To mute or unmute the microphone, use the switch located on the in-line control unit. Slide the switch to the 'Mute' position to disable the microphone, and slide it back to enable it.

Adjustable Microphone

The flexible microphone arm can be bent and positioned to optimize voice pickup. Adjust it closer to your mouth for clearer communication or away when not in use.

Figure 4: Close-up of the in-line control unit, showing the volume scroll and microphone mute switch.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the headset. For earpads, a slightly damp cloth can be used, but ensure they are completely dry before next use. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cable.
• Cable Care: The flexible fabric jacket provides kink protection, but avoid excessive bending or pulling of the cable to prevent internal damage.

6. Troubleshooting

No Sound from Headset

• Ensure the USB plug is fully inserted into the port.
• Check your device's sound settings to confirm the uRage SoundZ 400 is selected as the output device.
• Verify the volume control on the in-line unit is not set to minimum and is not muted.
• Test the headset on another USB port or device to rule out a port issue.

Microphone Not Working

• Ensure the microphone mute switch on the in-line control is in the 'unmute' position.
• Check your device's sound settings to confirm the uRage SoundZ 400 is selected as the input device.
• Adjust the microphone arm closer to your mouth.
• Ensure no other applications are monopolizing the microphone.

Blue Illumination Not Working

• Ensure the headset is properly connected via USB. The illumination is powered through the USB connection.
• If the headset functions otherwise, this may indicate a minor LED issue that does not affect audio performance.

7. Specifications

8. What's in the Box

The package for your uRage SoundZ 400 Wired Gaming Headset includes:

• uRage SoundZ 400 Wired Gaming Headset
• User Manual (this document)

9. Warranty and Support

This product comes with a 5-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please refer to the contact information provided by your retailer or visit the official uRage website.

Manufacturer: Hama GmbH & Co. KG, Germany

10. Product Overview Video