Bandai Spirits SD EX-Standard Gundam Aerial Model Kit Instruction Manual

Introduction

This manual provides detailed instructions for assembling, operating, and maintaining your Bandai Spirits SD EX-Standard Gundam Aerial model kit. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

The fully assembled Gundam Aerial model kit, showcasing its compact SD EX-Standard design, equipped with its beam rifle and shield.

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

This product contains small components that may pose a choking hazard. Keep all parts and packaging materials away from young children. Adult supervision is recommended during assembly, especially for younger builders.

Package Contents

Verify that all components are present before starting assembly. Your kit should include:

• Gundam Aerial SD EX-Standard Model Kit runners
• Beam Rifle
• Beam Saber (clear blue blade)
• Shield
• Instruction Manual (this document)
• Sticker Sheet

This image displays the primary accessories provided with the kit: a beam rifle, a blue beam saber, and the distinctive shield.

Assembly Instructions

The SD EX-Standard series features snap-fit construction, meaning no glue is required. Parts can be detached from the runners by hand or with a hobby nipper for cleaner cuts.

General Assembly Tips:

• Follow the numbered steps in the included pictorial guide.
• Carefully remove parts from the runners. Smooth any nubs with a hobby knife or file if desired.
• Ensure parts are firmly pressed together until they click into place.
• Apply stickers as indicated in the pictorial guide for enhanced detail. Tweezers may assist with small stickers.

A close-up view of hands connecting two plastic parts, illustrating the straightforward, snap-fit assembly process typical for this model kit.

Accessory Integration:

• Beam Rifle: The beam rifle can be held in the model's hand or attached to a designated port on the model's back for storage.
• Beam Saber: The clear blue beam saber blade can be inserted into the hilt (if provided separately) and held by the model.
• Shield: The shield can be attached to the forearm. Additionally, parts from the shield can be separated and attached to the shoulder of the mobile suit for an alternative configuration.

This image highlights the model's versatility, demonstrating how the beam rifle can be securely stored on the back and how sections of the shield can be detached and mounted onto the mobile suit's shoulder armor.

Posing and Display

The Gundam Aerial model features multiple points of articulation, allowing for a variety of dynamic poses. Carefully manipulate the joints to achieve desired stances.

• Joint Movement: Gently bend and rotate joints at the neck, shoulders, elbows, hips, and knees. Avoid excessive force to prevent breakage.
• Accessory Posing: Position the beam rifle and shield to recreate iconic action scenes or custom displays.
• Stability: Ensure the model is balanced when posing to prevent it from falling. An action base (sold separately) can provide additional stability for aerial or dynamic poses.

The Gundam Aerial model posed dynamically, ready for action with its beam rifle aimed forward and shield deployed, showcasing its articulation.

A rear perspective of the Gundam Aerial model, providing a clear view of its backpack unit and the intricate details on the back of its legs.

Care and Maintenance

To ensure the longevity and appearance of your model kit, follow these care guidelines:

• Cleaning: Dust the model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
• Handling: Handle the model by its main body parts rather than delicate accessories or thin antennas to avoid accidental damage.

Troubleshooting

If you encounter any issues during or after assembly, consider the following:

• Loose Parts: If a part feels loose, ensure it is fully pressed into its connection point. A small amount of hobby cement (not included) can be used on non-moving parts if necessary, but this is generally not required for snap-fit kits.
• Sticker Application: If stickers are difficult to apply, use tweezers. For better adhesion, ensure the surface is clean and dry.
• Joint Stiffness: If a joint is too stiff, gently work it back and forth. Do not force it, as this may cause breakage.

Product Specifications

Warranty and Support

For information regarding product warranty, replacement parts, or further assistance, please contact Bandai Spirits customer support directly or visit their official website. Details are typically provided on the product packaging or through the retailer where the kit was purchased.

You can also visit the BANDAI SPIRITS Store on Amazon for more products and information.