HIBORI Projector Stand Instruction Manual

Introduction

Thank you for choosing the HIBORI Projector Stand. This adjustable floor stand is designed to provide a stable and versatile platform for your projector, enhancing your viewing experience in various settings. Its robust construction and flexible adjustments allow for optimal positioning and stability.

Please read this manual thoroughly before assembly and use to ensure proper installation, safe operation, and to maximize the lifespan of your product.

Safety Information

• Do not exceed the maximum load capacity of 6 lbs (3 kg). Overloading can cause instability and damage.
• Ensure all connections are securely tightened before placing a projector on the stand.
• Place the stand on a flat, stable, and level surface to prevent tipping.
• Keep the stand away from high-traffic areas where it might be accidentally bumped or knocked over.
• Do not allow children to play with or climb on the stand.
• Avoid exposing the stand to extreme temperatures or direct moisture.
• This stand is designed for projectors with a 1/4" (6mm) bottom center screw hole. Verify your projector's compatibility before use.

Package Contents

Please check that all components are present and in good condition:

• Main Support Rod (Telescopic)
• Solid Metal Base
• Projector Mounting Arm with Ball Head
• Mounting Screws and Tools (if applicable)
• Instruction Manual

Setup and Assembly

Follow these steps to assemble your HIBORI Projector Stand:

1. Attach the Support Rod to the Base: Securely screw the main support rod into the threaded hole on the solid metal base. Ensure it is tightened firmly to prevent wobbling.
2. Install the Mounting Arm: Slide the projector mounting arm onto the top of the support rod. Tighten the clamp-style knob on the arm to secure it at your desired height.
3. Mount Your Projector: Carefully align your projector's 1/4" (6mm) bottom center screw hole with the screw on the ball head of the mounting arm. Rotate your projector clockwise onto the screw until it is securely fastened.

Image: Fully assembled HIBORI Projector Stand with a projector in place, demonstrating its sleek design and stability.

Adjusting Height and Angle

• Height Adjustment: Loosen the clamp-style knob on the main support rod. Extend or retract the telescopic section to achieve a height between 16 inches (40 cm) and 48 inches (120 cm). Once at the desired height, tighten the knob securely.

Image: Visual representation of the stand's adjustable height feature, illustrating the range from 40 cm to 120 cm.
• Angle Adjustment: The high-quality ball head allows for 360° horizontal rotation and 90° vertical tilt. Loosen the knob on the ball head, adjust your projector to the desired angle (including upwards for ceiling projection), and then tighten the knob firmly to lock it in position.


Image: Detailed view of the ball head mechanism, highlighting its 360-degree rotation and 90-degree tilt capabilities for precise projector positioning.

Compatibility Notice

This projector stand is exclusively compatible with projectors featuring a 1/4" (6mm) bottom center screw hole. Please verify your projector's specifications before use.

Image: Close-up of the 1/4-inch thread mount, demonstrating how a compatible projector attaches to the stand, along with the stated load capacity.

Operating the Projector Stand

The HIBORI Projector Stand is designed for versatile placement and optimal viewing angles.

• Optimal Placement: The unique 'L' shape and offset base allow the stand to be placed discreetly behind furniture such as sofas, beds, or desks, saving space and maintaining a clean aesthetic.

Image: The projector stand positioned behind a sofa, illustrating its 'hidden style' and space-saving design, allowing for flexible room arrangements.
• Adjusting for Viewing: Once your projector is mounted, fine-tune the height and angle using the adjustment knobs to achieve the perfect projection on your screen or wall. The 360° rotation and 90° tilt provide flexibility for various projection needs, from standard viewing to ceiling projection.
• Versatile Use: This stand is suitable for various environments, including living rooms, bedrooms, home offices, and meeting rooms, providing a stable and adjustable platform for your projection needs.


Image: Examples of the projector stand in use across different environments: a cozy bedroom, a spacious living room, and a professional meeting room, highlighting its adaptability.

Maintenance

Proper maintenance will ensure the longevity and optimal performance of your projector stand.

• Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
• Inspections: Periodically check all screws and knobs to ensure they remain tight and secure. Re-tighten if necessary.
• Storage: If storing the stand for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter any issues with your HIBORI Projector Stand, refer to the following common problems and solutions:

Specifications

Warranty and Support

Warranty: This HIBORI Projector Stand comes with a 12-month warranty from the date of purchase, covering manufacturing defects.

Customer Support: For any questions, concerns, or assistance with your product, please contact HIBORI customer support. Refer to your purchase documentation or the official HIBORI website for contact details.