LEMBERI Adjustable Counter Height Swivel Bar Stools User Manual

Introduction

Thank you for choosing LEMBERI Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read it thoroughly before use and retain it for future reference.

Safety Information

• Weight Limit: Do not exceed the maximum weight recommendation of 350 lbs (158 kg). Exceeding this limit may cause damage to the stool or personal injury.
• Assembly: Ensure proper assembly of all components before use. Incorrect assembly can lead to instability and potential hazards.
• Stability: Always ensure the stool is placed on a flat, stable surface. Avoid standing on the stool or using it as a ladder.
• Children: Supervise children when they are using the bar stools, especially when adjusting height or swiveling.
• Movement: Do not drag the stools across the floor, as this may damage the floor or the stool's base. Lift and move as needed.

Parts List

Before assembly, verify that all parts are present and undamaged. The package includes:

• Seat (Faux Leather & Foam)
• Gas Lift
• Metal Base
• Screws
• Tools for assembly
• Assembly Instructions

Image: Exploded view showing all components of the LEMBERI bar stool, including the seat, gas lift, metal base, and footrest.

Setup and Assembly

Assembly is straightforward and typically takes about 10 minutes per stool. All necessary screws and tools are included.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Gas Lift to Base: Insert the narrow end of the gas lift into the center hole of the metal base. Ensure it is securely seated.
3. Attach Footrest: Slide the footrest ring onto the gas lift, ensuring it rests on the designated support.
4. Attach Seat to Gas Lift: Align the mounting plate on the underside of the seat with the top of the gas lift. Secure the seat using the provided screws and tools.
5. Test Stability: Once assembled, gently test the stool's stability before full use.

Image: Diagram illustrating the simple assembly process of attaching the seat to the gas lift and base.

Operating Instructions

Adjusting Height

The bar stool features an adjustable height mechanism, allowing the seat height to be set from 22 to 31 inches (56 cm to 79 cm) to fit various counter heights (36"-45").

• To Raise: While standing, pull the lifting handle located under the seat upwards. The seat will automatically rise. Release the handle when the desired height is reached.
• To Lower: While seated, pull the lifting handle located under the seat upwards. The seat will lower under your weight. Release the handle when the desired height is reached.

Image: Close-up of the lift handle located beneath the seat, used for adjusting the stool's height.

360° Swivel Function

The seat can rotate a full 360 degrees, providing flexibility and ease of movement. Simply turn the seat in the desired direction.

Image: Diagram showing the 360-degree swivel capability of the bar stool.

Maintenance

Proper care will extend the life and appearance of your LEMBERI bar stools.

• Cleaning: Wipe the faux leather and metal surfaces with a dry cloth. For spills or stains, use a damp cloth with mild soap and water, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Floor Protection: The metal base includes a rubber ring to prevent floor scratching. Ensure this ring remains intact and in place.

Image: Detailed view of the faux leather seat, highlighting its texture and waterproof properties for easy cleaning.

Troubleshooting

If you encounter any issues with your LEMBERI bar stools, please refer to the following common solutions:

• Stool is Wobbly: Check that all assembly screws are securely tightened. Ensure the stool is on a flat, even surface.
• Height Adjustment Not Working: Verify that the gas lift lever is fully engaged. If the issue persists, ensure no obstructions are preventing the gas lift from operating smoothly.
• Squeaking Noises: Apply a small amount of silicone lubricant to moving parts, such as the swivel mechanism or gas lift, if squeaking occurs.

Specifications

Image: Technical drawing displaying the full dimensions of the LEMBERI bar stool, including height, width, and depth.

Warranty and Support

For any questions, concerns, or warranty claims, please contact LEMBERI customer support. Refer to your purchase documentation for specific warranty details.

You can visit the official LEMBERI store for more information and contact options: LEMBERI Store