Alarm Controls Corp. TS-18
Alarm Controls TS-18 Under Counter/Desk Door Release User Manual
Model: TS-18 | Brand: Alarm Controls Corp.
Product Overview
The Alarm Controls TS-18 is a momentary push button designed for under counter or under desk door release applications. This compact and durable device provides a reliable solution for controlling access, featuring both Normally Open (NO) and Normally Closed (NC) contact types for versatile integration into various security systems. It is typically used in commercial or industrial settings to activate an electronic lock or access control system.
This image displays the compact, grey enclosure of the Alarm Controls TS-18 under counter/desk door release button. The device features a prominent silver, knurled push button on one side, designed for momentary activation. A small mounting hole is visible on the base flange, indicating its intended installation method.
Setup and Installation
The TS-18 is designed for discreet installation under a counter or desk. Proper installation ensures optimal performance and security.
Mounting
- Identify a suitable, secure location under the counter or desk where the button can be easily accessed but remains out of sight.
- Ensure there is sufficient space for wiring and that the mounting surface is stable.
- Use appropriate screws (not included) to secure the device through the pre-drilled mounting hole(s) on the base flange.
Wiring
The TS-18 features a 2-way circuit with Normally Open (NO) and Normally Closed (NC) contacts. Consult your access control system's wiring diagram for specific connections.
- Normally Open (NO): When the button is not pressed, the circuit is open. Pressing the button closes the circuit. This is commonly used to activate a device (e.g., release a lock) when pressed.
- Normally Closed (NC): When the button is not pressed, the circuit is closed. Pressing the button opens the circuit. This can be used to deactivate a device or trigger an alarm when pressed.
- Connect the appropriate wires from your access control panel or power supply to the terminals on the TS-18. Ensure all connections are secure and insulated.
Operating Instructions
The TS-18 operates as a momentary push button. Its function depends on how it is wired into your access control system.
- To activate the connected device (e.g., release an electronic door lock), firmly press the silver push button.
- The button will return to its original position once released, breaking or making the circuit as per its contact type (NO or NC).
- Ensure the button is fully depressed for proper activation.
Maintenance
The Alarm Controls TS-18 is designed for durability and requires minimal maintenance. Regular checks can help ensure its longevity and reliable operation.
- Cleaning: Periodically wipe the exterior of the device with a soft, dry cloth to remove dust and grime. Avoid using abrasive cleaners or solvents.
- Inspection: Annually inspect the wiring connections to ensure they are secure and free from corrosion. Check the button for smooth operation and ensure it returns to its original position after being pressed.
- Environmental Conditions: Ensure the device is not exposed to excessive moisture or extreme temperatures, as it has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction.
Troubleshooting
If you experience issues with your TS-18, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Button does not activate device. | Incorrect wiring (NO/NC), loose connections, no power to system, faulty button. | Verify wiring against system diagram. Check all connections for tightness. Confirm power supply to the access control system. If issues persist, the button may need replacement. |
| Button feels stiff or stuck. | Accumulation of dirt/debris, physical damage. | Clean around the button with a soft, dry cloth. Inspect for any physical obstructions or damage. |
| Intermittent operation. | Loose wiring, intermittent power supply. | Check all wiring connections for looseness. Ensure stable power supply to the connected system. |
If troubleshooting steps do not resolve the issue, contact a qualified technician or the manufacturer for assistance.
Specifications
| Model Number | TS-18 |
| Brand | Alarm Controls Corp. |
| Operation Mode | Push Button |
| Contact Type | Normally Open (NO), Normally Closed (NC) |
| Circuit Type | 2-way |
| Actuator Type | Push Button |
| Terminal | Button |
| Contact Material | Copper |
| International Protection Rating | IP44 |
| Number of Positions | 3 |
| Item Weight | 0.32 ounces |
Warranty Information
Specific warranty details for the Alarm Controls TS-18 are typically provided by the manufacturer, Alarm Controls Corp., at the time of purchase or can be found on their official website. Please refer to the documentation included with your product or contact the manufacturer directly for comprehensive warranty terms and conditions.
Customer Support
For technical assistance, product inquiries, or support regarding your Alarm Controls TS-18, please contact Alarm Controls Corp. customer service. Contact information can usually be found on the manufacturer's official website or on the product packaging.
When contacting support, please have your product model number (TS-18) and any relevant purchase information ready.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.