Bestway Power Steel Rectangular Pool Set User Manual

Introduction

Welcome to the Bestway Power Steel Rectangular Pool Set user manual. This guide provides essential information for the safe and efficient setup, operation, and maintenance of your new above-ground pool. Please read all instructions carefully before assembly and use to ensure a long-lasting and enjoyable experience.

The Bestway Power Steel Rectangular Pool is designed for durability and ease of assembly, featuring the advanced Seal&Lock system for enhanced resistance against rust and corrosion.

Safety Information

WARNING: Failure to follow these instructions can result in serious injury or death.

• Adult supervision is required at all times when children are in or near the pool.
• The uniqueness of this design prevents the formation of rust by avoiding friction between the metal parts and the passage of water inside the joints of the structure.
• Ensure the pool is set up on a level, stable surface free from sharp objects.
• Do not dive or jump into the pool. The water depth is not sufficient for diving.
• Keep all electrical devices away from the pool.
• Always use the provided ladder for entering and exiting the pool. Secure the ladder when not in use to prevent unsupervised access.
• Regularly check the pool for signs of wear or damage. Repair or replace damaged components immediately.
• Maintain proper water chemistry to ensure a safe and healthy swimming environment.

Components Included

Your Bestway Power Steel Rectangular Pool Set includes the following main components:

• Rectangular Pool Frame and Liner (TriTech material)
• Sand Pump (Model 58497, Capacity 5678 liters per hour)
• Pool Ladder (Model 58332)
• Pool Cover
• ChemConnect Chemical Dispenser
• Hoses for Pump and Pool Connection
• Repair Patch
• Instruction Manual (this document)

Setup Instructions

1. Site Selection: Choose a perfectly level area in your garden. The ground must be firm and free of any sharp objects, roots, or debris. Do not set up the pool on a slope or uneven ground, as this can lead to structural failure and injury.
2. Ground Preparation: Clear the chosen area of all grass, stones, and other obstacles. It is recommended to place a ground cloth (not included) under the pool liner for added protection.
3. Unpacking: Carefully unpack all components. Lay out the pool liner in the selected area, ensuring the drain valve is positioned where it can be easily accessed for drainage.
4. Frame Assembly: Assemble the steel frame according to the diagrams in the separate assembly guide (usually included in the box). The Seal&Lock system ensures a secure and corrosion-resistant connection of the frame elements. Ensure all connections are fully engaged and locked.
5. Liner Attachment: Once the frame is assembled, attach the pool liner to the frame as per the instructions. Ensure the liner is smooth and free of wrinkles on the bottom.
6. Pump and Filter Connection: Connect the sand pump (Model 58497) to the pool's inlet and outlet valves using the provided hoses. Follow the pump's specific instruction manual for setup and priming. Ensure all connections are tight to prevent leaks.
7. Ladder Assembly: Assemble the pool ladder (Model 58332) according to its instructions. Place it securely against the pool wall.
8. Filling the Pool: Begin filling the pool with water. As the water level rises, gently smooth out any remaining wrinkles in the bottom of the liner. Stop filling when the water reaches the recommended fill line, typically indicated on the liner or in the separate assembly guide. The pool has a capacity of approximately 16,477 liters.
9. ChemConnect Dispenser: Place the ChemConnect chemical dispenser in the pool. This dispenser is designed to distribute chemicals evenly.

Operating the Pool

Water Filtration (Sand Pump)

The sand pump is crucial for keeping your pool water clean. Operate the pump daily for several hours, depending on pool usage and water conditions. Refer to the sand pump's specific manual for detailed operating instructions, including backwashing and rinsing procedures.

Chemical Dispensing (ChemConnect)

The ChemConnect dispenser helps maintain proper water chemistry. Insert appropriate pool chemicals (e.g., chlorine tablets) into the dispenser. Adjust the dispenser's opening to control the release rate of chemicals, ensuring balanced water parameters. Always test your water regularly.

Pool Cover Usage

Use the included pool cover when the pool is not in use to prevent debris from entering the water and to reduce water evaporation. Ensure the cover is securely fastened to prevent it from being blown off by wind.

Maintenance

Water Quality

• Testing: Regularly test your pool water for pH, chlorine, alkalinity, and calcium hardness using a reliable test kit.
• Balancing: Adjust chemical levels as needed to maintain optimal water balance. Ideal ranges are: pH 7.2-7.6, Free Chlorine 1-3 ppm, Total Alkalinity 80-120 ppm.
• Shock Treatment: Periodically shock treat your pool to eliminate contaminants and prevent algae growth.

Cleaning

• Skimming: Use a pool skimmer net to remove leaves, insects, and other floating debris daily.
• Vacuuming: Vacuum the pool bottom regularly to remove settled dirt and debris.
• Liner Cleaning: Wipe down the pool liner above the waterline to prevent the buildup of grime and scum.

Winterization (Seasonal Storage)

Before winter, properly drain, clean, and dry your pool. Disassemble the frame and store all components in a dry, protected area to prevent damage from freezing temperatures and prolong the product's lifespan. Refer to the full instruction manual for detailed winterization steps.

Troubleshooting

Specifications

• Model Number: 105619QXXX23 (also known as 5619Q)
• Dimensions (L x W x H): 549 x 274 x 132 cm (18' x 9' x 52")
• Water Capacity (90%): Approximately 16,477 liters
• Material: Durable TriTech (reinforced PVC and polyester mesh) liner, corrosion-resistant steel frame with Seal&Lock system.
• Sand Pump Capacity: 5678 liters per hour (Model 58497)
• Item Weight: 118.3 kg
• Shape: Rectangular

Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Bestway website. Keep your proof of purchase for any warranty claims.

For technical support, replacement parts, or further assistance, please contact Bestway customer service. Contact details can typically be found on the Bestway website or on the product packaging.

Website: www.bestwaycorp.com