1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new AIMADI Touchless Kitchen Faucet with Pull Down Sprayer, Model AM-3035B. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.
Image 1: AIMADI Touchless Kitchen Faucet, Matte Black finish, with pull-down sprayer and integrated motion sensor.
2. Product Features
- Touchless Technology: Equipped with double sensors for hands-free operation. Wave your hand to activate or deactivate water flow.
- Automatic Shut-off: The touchless function automatically turns off after 3 minutes of continuous flow to prevent water waste.
- Dual Operation: Can be operated manually using the single handle or automatically via the motion sensor.
- Pull-Down Sprayer: Features a flexible pull-down sprayer with an extendable hose (22.8 inches / 58 cm).
- 2-Function Sprayhead: Easily switch between aerated stream and powerful spray modes with a button.
- Ceramic Disc Cartridge: Ensures drip-free performance and long-term durability.
- 360° Swivel: The spout offers a full 360-degree swivel range, suitable for single or double bowl sinks.
- Temperature Control: A small handle allows for precise adjustment of hot and cold water temperature.
- Durable Construction: Made from brass with a matte black finish.
Image 2: The pull-down sprayer extended, demonstrating its 22.8-inch reach.
Image 3: Illustration of the two spray modes: Stream Mode and Spray Mode.
3. Package Contents
Verify that all components are present before beginning installation:
- AIMADI Kitchen Faucet (Model AM-3035B)
- Mounting Accessory Kit
- Instruction Manual (this document)
- Hot and Cold Water Supply Hoses
- Gravity Ball for Pull-Down Sprayer
- Battery Box (requires 4 AA batteries, not included)
4. Specifications
| Feature | Specification |
|---|---|
| Brand | AIMADI |
| Model Name | AM-3035B |
| Mounting Type | Deck Mount, Single Hole |
| Finish Type | Matte Black |
| Material | Brass (Faucet Body), Zinc (Handle) |
| Number of Handles | 1 |
| Maximum Flow Rate | 1.8 Gallons Per Minute (GPM) |
| Spout Height | 5.5 Inches |
| Spout Reach | 8.85 Inches |
| Hose Length (Pull-Down) | 22.8 Inches |
| Item Weight | 6.02 Pounds |
| Batteries Required | 4 x AA (not included) |
Image 4: Technical drawing illustrating the dimensions of the faucet in millimeters.
5. Safety Information
- Always turn off the main water supply before beginning any installation or maintenance.
- Ensure all connections are secure to prevent leaks.
- Do not overtighten nuts or connections, as this can damage components.
- Use appropriate tools and wear safety glasses during installation.
- Keep batteries away from children. Do not mix old and new batteries, or different types of batteries.
- If you are unsure about any step, consult a qualified plumber.
6. Setup and Installation
Follow these steps for proper installation of your AIMADI Touchless Kitchen Faucet:
- Prepare the Sink Area: Turn off the hot and cold water supply valves under the sink. Remove your old faucet. Clean the sink surface thoroughly.
- Install O-Ring: Insert the black O-ring into the groove on the bottom of the faucet base.
- Connect Water Hoses: Hand-tighten the hot and cold water supply hoses (6) onto the faucet (1). Refer to the instruction drawing to ensure correct hot and cold connections. Twist/thread each hose as close to the faucet base as possible.
- Mount the Faucet: Drop the hoses through the sink hole. From underneath the sink, thread the brass nut (4) onto the faucet base (1). The shorter threaded section should face the faucet. Hand-tighten.
- Secure the Faucet: Carefully position the faucet in the sink hole, ensuring the O-ring is centered. From underneath, slide the clear rubber washer (3), followed by the metal washer (not numbered in some diagrams), onto the threaded brass nut (4). Screw on the screw cap (5) until snug, but do not overtighten. Tighten the two set screws on the screw cap.
- Connect Supply Lines: Attach the braided hot and cold hoses to your corresponding hot and cold water supply lines. Ensure a tight, leak-free connection.
- Install Battery Box: Insert 4 AA batteries (not included) into the battery box. Connect the battery box cable to the faucet's control box. Secure the battery box in an accessible location under the sink.
- Install Gravity Ball: Attach the gravity ball to the pull-down hose under the sink. This helps the sprayer retract smoothly.
- Test for Leaks: Slowly turn on the hot and cold water supply valves. Check all connections for leaks.
7. Operating Instructions
7.1. Touchless Operation
To use the touchless function, ensure the manual handle is in the 'ON' position (typically pointing forward or slightly to the side, allowing water flow). Wave your hand approximately 3 inches in front of the sensor located on the faucet body. The water will turn on. Wave your hand again to turn the water off. The faucet will automatically shut off after 3 minutes of continuous flow if no further hand motion is detected.
Image 5: A hand activating the motion sensor on the faucet body.
Image 6: Demonstrating the touchless activation with a hand wave, indicating the sensor's functionality.
7.2. Manual Operation
To operate the faucet manually, simply use the single handle. Lift the handle to turn on the water and push it down to turn it off. Move the handle left for hot water and right for cold water. The manual handle overrides the sensor function when in the 'OFF' position.
7.3. Sprayer Function
The pull-down sprayer offers two modes: stream and spray. Press the button on the sprayhead to toggle between the aerated stream for filling and the powerful spray for rinsing. The sprayer will remain in the selected mode until changed again.
7.4. Switching Between Manual and Touchless Modes (Control Box)
If you wish to disable the touchless mode entirely and use only manual operation, or vice-versa, you can adjust the sensor control switch on the control box located under the sink. Turn the knob counter-clockwise to use the faucet in manual mode only. Turn the knob clockwise completely to use the faucet in sensor mode.
Image 7: Diagram showing the knob on the control box for switching between manual and touchless modes.
8. Maintenance
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Aerator Maintenance: If water flow decreases, the aerator may be clogged. Unscrew the aerator from the sprayhead, clean any debris, and rinse thoroughly before reattaching.
- Battery Replacement: When the sensor function becomes inconsistent or stops working, it is likely time to replace the 4 AA batteries in the battery box. Ensure correct polarity when inserting new batteries.
- Hose Inspection: Periodically check the pull-down hose and supply lines for any signs of wear, kinks, or leaks.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow (manual or touchless) | Water supply turned off; clogged aerator; kinked hose. | Check water supply valves; clean aerator; inspect hoses for kinks. |
| Touchless function not working | Dead batteries; sensor control knob in manual mode; sensor obstructed. | Replace batteries; turn sensor control knob to sensor mode; ensure sensor is clean and unobstructed. |
| Low water pressure | Clogged aerator; partially closed water supply valves. | Clean aerator; fully open water supply valves. |
| Faucet leaks from connections | Loose connections; damaged washers. | Tighten connections (do not overtighten); replace damaged washers. |
| Sprayer does not retract fully | Gravity ball improperly positioned or too light; hose obstructed. | Adjust gravity ball position; clear any obstructions around the hose under the sink. |
10. Warranty and Support
AIMADI products are manufactured to high-quality standards. This product comes with a lifetime warranty, covering defects in materials and workmanship under normal use. For warranty claims or technical assistance, please contact AIMADI customer support.
Customer Support
AIMADI is committed to providing excellent customer service. Our professional team is ready to provide thoughtful after-sales support and aims for a fast reply within 24 hours.
- Online Support: Visit the official AIMADI store on Amazon or their website for contact information.
- Email: Refer to your purchase documentation for direct email support.
Image 8: The official AIMADI brand logo.