YBQZJSLY GQ12-120100-CU

YBQZJSLY 14V AC DC Charger Power Adapter User Manual

Model: GQ12-120100-CU

1. Introduction

This manual provides instructions for the safe and effective use of your YBQZJSLY 14V AC DC Charger Power Adapter. This adapter is designed to provide power to compatible Acoustic Research AR Santa Cruz Bluetooth Speakers, including models AWSF100, AWSEE3, AWSEE3BK, AWSEE320, AWSEE320BK, and AWSBT10BK.

Please read this manual thoroughly before using the product and retain it for future reference.

2. Safety Information

To ensure safe operation and prevent damage, please observe the following precautions:

  • Use the adapter only with devices that require a 14V DC input and a compatible barrel connector. Verify your device's power requirements before connecting.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
  • Unplug the adapter from the power outlet when not in use for extended periods.
  • Ensure the power outlet is easily accessible for quick disconnection if needed.
  • Keep out of reach of children.

This adapter features built-in protection against short circuit, over current, over voltage, and over temperature to enhance safety.

3. Package Contents

The package includes:

  • 1 x YBQZJSLY 14V AC DC Charger Power Adapter (Model: GQ12-120100-CU)

4. Specifications

FeatureDetail
Model NumberGQ12-120100-CU
Input VoltageAC 100-240V, 50-60Hz
Output VoltageDC 14V
Connector TypeBarrel Connector
Cable Length5.9 FT (1.8 M)
Safety FeaturesShort Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection
Compatible DevicesAcoustic Research AR Santa Cruz Bluetooth Speakers (AWSF100, AWSEE3, AWSEE3BK, AWSEE320, AWSEE320BK, AWSBT10BK)
Dimensions (Adapter Body)Approximately 3.7 x 3.7 x 3.59 inches (Package Dimensions)
Weight4.3 ounces

5. Setup

  1. Verify Compatibility: Before connecting, ensure your Acoustic Research AR Santa Cruz Bluetooth Speaker requires a 14V DC input and has a compatible barrel connector. Refer to your speaker's manual for specific power requirements.
  2. Connect to Speaker: Insert the barrel connector end of the power adapter cable firmly into the DC input port on your Acoustic Research AR Santa Cruz Bluetooth Speaker.
  3. Connect to Power Outlet: Plug the AC prongs of the power adapter into a standard AC 100-240V wall outlet.
  4. Power On: Once connected, your speaker should receive power. Follow your speaker's instructions to power it on.
Close-up view of the YBQZJSLY 14V AC DC Charger Power Adapter with its barrel connector and AC prongs.

Image: Close-up view of the YBQZJSLY 14V AC DC Charger Power Adapter, showing the barrel connector and AC prongs. This illustrates the connection points for setup.

6. Operating Instructions

The YBQZJSLY 14V AC DC Charger Power Adapter functions as a power supply for your compatible Acoustic Research AR Santa Cruz Bluetooth Speaker. Once properly connected as described in the Setup section:

  • The adapter will supply continuous power to your speaker, allowing it to operate or charge its internal battery (if applicable).
  • Ensure the adapter is plugged into a functional wall outlet.
  • If your speaker has a charging indicator, observe it to confirm that power is being supplied.
Diagram showing the YBQZJSLY 14V AC DC Charger Power Adapter with its AC plug and DC barrel connector, highlighting internal copper wiring for efficient power transmission.

Image: Diagram illustrating the YBQZJSLY 14V AC DC Charger Power Adapter, showing its AC plug and DC barrel connector. The image also highlights the internal copper wiring, indicating efficient power transmission.

7. Maintenance

Proper care will extend the life of your power adapter:

  • Cleaning: Disconnect the adapter from both the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
  • Inspection: Periodically inspect the cable and connector for any signs of damage, such as fraying, cuts, or bent pins. If damage is observed, discontinue use and replace the adapter.

8. Troubleshooting

If you encounter issues with your power adapter, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Speaker not receiving power.
  • Adapter not fully plugged into outlet.
  • Barrel connector not fully inserted into speaker.
  • Power outlet is not functional.
  • Speaker is not compatible with 14V DC.
  • Damaged adapter or cable.
  • Ensure the adapter is securely plugged into a live wall outlet.
  • Firmly insert the barrel connector into the speaker's DC input.
  • Test the outlet with another device.
  • Verify your speaker's power requirements.
  • Inspect the adapter and cable for damage. If damaged, replace the adapter.
Adapter feels excessively hot.
  • Normal operation (slight warmth is common).
  • Overload or internal fault.
  • If it's only slightly warm, this is normal.
  • If it's excessively hot to touch, immediately unplug the adapter from the wall and the speaker. Discontinue use and contact customer support.
Loose connection at speaker port.
  • Incorrect barrel connector size.
  • Worn speaker port.
  • Ensure the adapter's barrel connector matches your speaker's port size.
  • If the speaker port is worn, it may require repair.
Internal components of the YBQZJSLY 14V AC DC Charger Power Adapter, showing professional circuit design and flame retardant materials.

Image: An internal view of the YBQZJSLY 14V AC DC Charger Power Adapter, illustrating its professional circuit design and the use of flame retardant materials for safety and reliability.

9. Warranty and Support

For any questions, concerns, or support needs regarding your YBQZJSLY 14V AC DC Charger Power Adapter, please contact the manufacturer or seller directly. Refer to your purchase documentation for specific warranty terms and contact information.

Manufacturer: DONGGUAN GANGQI ELECTRONIC CO LTD

For assistance, please refer to the contact information provided at the point of purchase or on the product packaging.

© 2024 YBQZJSLY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.