Introduction
This manual provides instructions for the safe and efficient operation of your Willpower 10W LED Outdoor Projector with Motion Detector. Please read these instructions carefully before installation and use, and retain them for future reference.
Safety Instructions
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure.
- Do not immerse the lamp underwater.
- Ensure proper grounding (yellow/green wire to earth, brown to live, blue to neutral).
- Do not stare directly into the LED light source when it is active.
- Operating temperature range: -20°C to 60°C.
Package Contents
The package typically includes:
- 1 x Willpower 10W LED Outdoor Projector with Motion Detector (without plug)
- Installation screws
Specifications
| Feature | Specification |
|---|---|
| Power | 10W |
| Voltage | 175V to 265V AC |
| Luminous Flux | 1000 lm |
| Color Temperature | 6000K - 6500K (Cool White) |
| Color Rendering Index (CRI) | 81 |
| Waterproof Rating | IP66 |
| Operating Temperature | -20°C to 60°C |
| Beam Angle | 120 degrees |
| Material | Tempered Glass, Aluminum |
| Dimensions (L x W x H) | 13 x 5.5 x 12.5 cm |
| Weight | 270 grams |
| Motion Sensor Type | PIR (Passive Infrared) |
| Motion Sensor Detection Distance | 4m - 10m |
| Motion Sensor Lighting Time | 3 seconds to 8 minutes |
| Mounting Type | Wall, Surface, Ceiling |
| Certifications | CE, IP66 |
| Warranty | 1 year Limited |
Product Dimensions
The product may come in slightly different models. Refer to the diagram below for typical dimensions.
This image illustrates the dimensions for both the new and old models of the 10W LED projector. The new model measures approximately 95mm/3.7in (width) x 120mm/4.7in (height) with a cable length of 260mm/10.2in and a thickness of 30mm/1.2in. The old model measures approximately 105mm/4.1in (width) x 135mm/5.3in (height) with a cable length of 190mm/7.5in and a thickness of 30mm/1.2in.
Setup and Installation
Mounting
The projector can be mounted on walls, floors, or ceilings. The integrated bracket allows for 180-degree adjustment to direct the light as needed.
This image shows the 180-degree adjustable stand for flexible positioning and the multi-slot fin-type heat sink design for efficient heat dissipation.
Wiring Instructions
Connect the wires as follows:
- Brown Wire: Live Wire
- Blue Wire: Neutral Wire
- Yellow/Green Wire: Earth Wire
Note: This product does not include a plug. Professional installation is recommended to ensure safety and compliance with local electrical codes.
Operating Instructions
Motion Sensor Settings
The integrated motion sensor features three adjustable dials for customization: LUX, TIME, and SENS.
This image displays the three adjustment dials on the motion sensor: LUX, TIME, and SENS. The sensor unit itself can rotate 360 degrees horizontally and 180 degrees vertically for optimal positioning.
LUX (Day/Night Sensor)
Controls when the light activates based on ambient light levels.
- Rotate towards the moon icon: The light will only activate at night or in low-light conditions.
- Rotate towards the sun icon: The light will activate during both day and night, regardless of ambient light.
TIME (Lighting Duration)
Adjusts how long the light stays on after motion is detected and no further motion is sensed.
- Rotate towards "-": Shortens the lighting duration (minimum 3 seconds).
- Rotate towards "+": Lengthens the lighting duration (maximum 8 minutes).
SENS (Sensing Distance)
Adjusts the detection range of the motion sensor.
- Rotate towards "-": Shortens the sensing distance (minimum 4 meters).
- Rotate towards "+": Increases the sensing distance (maximum 10 meters).
This image illustrates the light's 120-degree irradiation range and how the motion sensor functions. It shows that continuous movement within the detection range keeps the light on, and the light turns off after a 30-second countdown when leaving the detection area (the duration is adjustable via the TIME setting).
Maintenance
- Clean the surface of the projector and sensor regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Periodically check wiring connections for security and integrity.
- Ensure the motion sensor lens is clear of obstructions (e.g., dirt, spiderwebs) for optimal performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power; incorrect wiring; LUX setting too low (daylight); faulty sensor | Check power supply; verify wiring connections; adjust LUX setting; test sensor functionality |
| Light stays on continuously | Continuous motion detected; TIME setting too long; LUX setting too high (night); faulty sensor | Check for obstructions causing continuous motion; adjust TIME setting; adjust LUX setting; test sensor functionality |
| Light turns on too frequently/randomly | SENS setting too high; sensor picking up unwanted movement (e.g., trees, animals, heat sources) | Reduce SENS setting; reposition sensor to avoid false triggers; ensure sensor is not aimed at heat sources |
| Light does not detect motion | SENS setting too low; sensor obstructed; incorrect angle; faulty sensor | Increase SENS setting; clear obstructions from sensor lens; adjust sensor angle for optimal coverage; test sensor functionality |
Warranty and Support
This Willpower product comes with a 1-year limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support or warranty inquiries, please contact your retailer or the manufacturer directly.
Manufacturer: Willpower (FOSHANSHINANHAIYIYUANDIANQIWUJINYIOUXIANGONGSI)
Model Number: FL-XPG10-ZB-RTGY-YZ
For more product information, you may refer to the EPREL database: https://eprel.ec.europa.eu/qr/1493044
Environmental Protection
Please dispose of this product responsibly at the end of its life cycle. Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding available collection systems.