FridayParts AWM-30 N Digital Reversible Torque Wrench User Manual

1. Introduction

This manual provides instructions for the safe and effective use of the FridayParts AWM-30 N Mini Digital Reversible Torque Wrench. This precision tool is designed for accurate torque application in various settings, including automotive and machinery industries. Please read this manual thoroughly before operation to ensure proper usage and to prevent damage to the tool or the workpiece.

The FridayParts AWM-30 N Digital Torque Wrench, showing its compact design and digital display.

2. Product Features

• Mini Design: Optimized for operation in confined spaces.
• User-Friendly Operation: Features a backlit LCD screen for improved visibility and ease of use.
• Reversible Ratchet Head: Supports both clockwise and counter-clockwise torque application.
• Multiple Measurement Modes: Includes Real-Time (T) and Peak (P) modes for diverse application needs.
• Four Engineering Units: Torque can be displayed in N-m, kgf-cm, lbf-ft, and lbf-in.
• Preset Memory: Stores up to 9 sets of preset torque values for quick recall.
• Audible and Visual Indicators: Equipped with an LED and buzzer to indicate target torque achievement.

3. Setup

3.1 Battery Installation

1. Locate the battery compartment cover on the handle of the torque wrench.
2. Use a suitable tool (e.g., a small screwdriver) to open the battery compartment.
3. Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Securely close the battery compartment cover.

Illustration of how to open the battery compartment and insert two AAA batteries into the torque wrench.

3.2 Attaching Sockets

1. Select the appropriate 1/4 inch drive socket for your application.
2. Align the square drive of the socket with the square drive on the wrench's ratchet head.
3. Push the socket firmly onto the drive until it clicks into place.
4. To remove, press the quick-release button (if present) and pull the socket off.

A socket being attached to the 1/4 inch square drive of the digital torque wrench.

4. Operating Instructions

4.1 Power On/Off

Press the P/C button to power on the device. The LCD screen will illuminate. To power off, press and hold the P/C button for a few seconds.

4.2 Unit Selection

Press the U/S button to cycle through the available measurement units: N-m, kgf-cm, lbf-ft, and lbf-in. Select the desired unit for your application.

4.3 Mode Selection

Press the M button to switch between operating modes:

• Real-Time Mode (T): Displays the current torque being applied.
• Peak Mode (P): Captures and displays the maximum torque applied during an operation.

4.4 Setting Preset Torque Values

In a preset mode, use the Up and Down arrow buttons to adjust the target torque value. Long press these buttons for faster adjustment. The wrench can store up to 9 preset values.

4.5 Applying Torque

1. Attach the appropriate socket to the wrench.
2. Set the desired torque value and unit.
3. Place the socket onto the fastener.
4. Apply steady force to the wrench handle. The digital display will show the applied torque.
5. As you approach the target torque, the LED indicator will light up, and the buzzer will sound, indicating that the target torque has been reached. Stop applying force immediately upon indication.

The digital torque wrench in action, applying torque to a bolt on a bicycle chain, demonstrating its application in small-space operations.

A digital torque wrench being used to tighten a bolt on an engine component, illustrating its use in automotive applications.

The digital torque wrench applying torque to a bolt on a piece of machinery, showcasing its versatility.

4.6 Operational Video Guide

5. Maintenance

• Cleaning: Wipe the wrench with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents.
• Storage: Store the torque wrench in its protective case in a dry, cool place, away from direct sunlight and extreme temperatures.
• Battery Care: Remove batteries if the wrench will not be used for an extended period to prevent leakage and damage.
• Calibration: For continued accuracy, periodic calibration by a qualified service center is recommended.

6. Troubleshooting

• Display Not Working: Check battery installation and ensure batteries are not depleted. Replace if necessary.
• Inaccurate Readings: Ensure the correct unit is selected. The wrench may require recalibration if readings remain inconsistent. Avoid dropping the tool, as this can affect accuracy.
• Buzzer Not Sounding: Check if the buzzer function is enabled (refer to specific model settings if applicable). Ensure the target torque is set correctly.

7. Specifications

A visual representation of the AWM-30 N model, highlighting its length (230mm), minimum graduation value (0.01 N.m), maximum operation range (30 N.m), connector size (1/4 inch), buzzer setting range (0.9-30 N.m), and accuracy (2%).

8. Warranty

This FridayParts AWM-30 N Digital Reversible Torque Wrench comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.

9. Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact FridayParts customer support through the retailer where the product was purchased or visit the official FridayParts website for contact information.