Microbeau Xion Mini Tattoo Machine User Manual
Model: 00761-00-GN
Introduction
The Microbeau Xion Mini Tattoo Machine is engineered for precise cosmetic tattoo applications. This device is suitable for both experienced professionals and new artists, offering control and comfort during procedures. Its design minimizes vibration and operates quietly, enhancing the user experience.
Key features include a lightweight, ergonomic design, a 6W MotorBolt system for consistent power, and a ratcheting system for precise needle depth adjustment. The Xion Mini is compatible with various needle types and can be used for a wide range of makeup tattooing styles.
Safety Information
This device is intended for experienced or professional tattoo use only. Ensure the application area is thoroughly sterilized before commencing any procedure.
Product Overview
Figure 1: Front view of the Microbeau Xion Mini Tattoo Machine in Gunmetal color.
Figure 2: Side view of the Microbeau Xion Mini, showcasing its slender design.
Figure 3: Angled view of the Microbeau Xion Mini, highlighting the "mini" engraving.
Figure 4: Diagram illustrating key features such as RCA connectivity, compact size, optimal balance, slim tapered grip, and 2.5mm stroke.
Figure 5: The Xion Mini Tattoo Machine held in hand, demonstrating its ergonomic design and compact form factor.
Key Features:
- Ultra Lightweight: Weighs 3.1 ounces, featuring an ergonomic pen-style design for comfort.
- 6W MotorBolt System: Provides maximum torque. The machine body and motor are designed for external wiping and cleaning.
- Quick & Easy Needle Adjustment: The GiveKnob dial allows for convenient adjustment of needle tension and depth from 0mm to 4mm.
- 2.5mm Stroke Length: A reliable stroke length suitable for all styles of makeup tattooing. The ratchet system locks needle depth settings.
- Low Vibration & Quiet Operation: Designed to minimize vibration and operate quietly.
- Versatile Application: Suitable for various makeup tattooing styles, including eyeliner, lips, scars, and scalp.
- Wireless Enabled: Can be paired with the Darklab app for voice-controlled give adjustments.
Setup
- Unpacking: Carefully remove the Xion Mini machine and all accessories from its packaging.
- Power Connection: Connect the machine to a compatible power supply using an RCA cable. Alternatively, for wireless operation, ensure the machine is charged and paired with Microbeau's Wireless Solutions or the Darklab app.
- Needle Cartridge Installation: Insert the desired needle cartridge into the machine. Ensure it is securely seated. The machine is compatible with all needle types.
- Needle Depth Adjustment: Adjust the needle depth using the ratcheting system. Turn the GiveKnob dial to achieve the desired depth setting.
Operating Instructions
- Power On: Activate your power supply. The machine will begin to operate quietly with minimal vibration.
- Adjusting Give/Tension: The unique GiveKnob dial allows for convenient adjustment of the needle's give and tension. Turn the dial to select settings from soft to hard (0mm up to 4mm), depending on your technique and desired outcome.
- Wireless Control (Optional): If using the Darklab app, utilize its interface for voice-controlled give adjustments, providing hands-free operation during procedures.
- Application: Proceed with the cosmetic tattooing procedure, maintaining proper technique and hygiene protocols.
- Power Off: Once the procedure is complete, turn off the power supply and disconnect the machine.
Maintenance and Cleaning
Proper maintenance ensures the longevity and optimal performance of your Xion Mini machine.
- External Cleaning: After each use, the machine body and motor can be externally wiped and cleaned with appropriate sterilizing solutions.
- Autoclaving: The Xion Mini is designed to withstand autoclaving at temperatures under 270° Fahrenheit (132.222° Celsius). Follow standard autoclaving procedures for sterilization.
- Storage: Store the machine in a clean, dry environment when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine not powering on | Loose power connection; faulty power supply; machine not charged (if wireless) | Check RCA cable connection; test with a different power supply; ensure wireless unit is charged. |
| Excessive vibration or noise | Improperly seated needle cartridge; internal issue | Re-seat the needle cartridge; if problem persists, contact Microbeau support. |
| Needle depth not adjusting | GiveKnob dial obstruction; internal mechanism issue | Ensure no debris is obstructing the dial; if issue persists, contact Microbeau support. |
For issues not listed above, please refer to the support section.
Specifications
| Model Number: | 00761-00-GN |
| Product Dimensions: | 1.11 x 1.11 x 3.64 inches |
| Weight: | 3.1 ounces (machine only), 6.74 ounces (packaged) |
| Stroke Length: | 2.5mm |
| Motor: | 6W MotorBolt System |
| Needle Depth Adjustment: | 0mm to 4mm via GiveKnob dial |
| Sterilization: | Autoclavable up to 270°F (132.222°C) |
| Connectivity: | RCA, Wireless (Darklab app compatible) |
| UPC: | 810034255686 |
Warranty and Support
For warranty information, technical support, or service inquiries, please contact Microbeau directly through their official website or authorized distributors.
Manufacturer: Microbeau
Website: www.microbeau.com