Svago ZGR Newton SV-630 Zero Gravity Recliner Chair User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Svago ZGR Newton SV-630 Dual Power Infinite Position Zero Anti Gravity Recliner Chair. Please read all instructions carefully before assembly and operation to ensure proper function and longevity of your product.

2. Safety Information

WARNING:

• This chair contains electrical components and moving parts.
• Always follow the assembly instructions carefully to ensure stability and safety.
• Do not exceed the maximum weight recommendation of 400 pounds.
• Keep the chair away from heat sources and liquids to prevent damage or injury.
• Always turn off the power and unplug the chair when not in use.
• Keep the power cord away from walking areas to prevent tripping hazards.
• Always supervise children when they are near the chair.

3. Product Features

The Svago ZGR Newton SV-630 recliner chair offers advanced features designed for comfort and relaxation:

• Air Cell Massage: Five air chambers inflate and deflate to relieve muscle tension and distribute pressure.
• Memory Foam: High-density memory foam provides plush seating and support, conforming to the body and eliminating pressure points.
• Premium Leather: Crafted from top-grain leather for durability, flexibility, and a luxurious feel.
• Air Cell Lumbar Support: Inflatable and deflatable system to customize lumbar comfort, aiding in spinal alignment.
• Handheld Remote: Provides control over heating, two massage programs, and two memory positions.

4. Setup

The Svago ZGR Newton SV-630 chair requires assembly. Follow the included assembly guide for detailed, step-by-step instructions. Ensure all components are securely fastened before connecting to power.

1. Unpack all components and verify against the parts list in the separate assembly guide.
2. Assemble the chair frame and attach the seating components as per the assembly instructions.
3. Connect the power cord to the chair and then to a grounded electrical outlet.
4. Ensure the chair is placed on a level surface with adequate clearance for reclining.

5. Operating Instructions

The chair's functions are controlled via the handheld remote.

5.1. Handheld Remote Control

The remote allows you to adjust the chair's position, activate massage, and control heat functions.

• Power Button: Turns the remote on/off.
• Recline/Incline Buttons: Adjust the backrest and leg rest to your desired position.
• Zero Gravity Button: Activates the pre-programmed zero-gravity recline position.
• Heat Button: Toggles the heating function on or off.
• Massage Programs: Select from two available air cell massage programs.
• Memory Position Buttons: Save and recall two preferred seating positions.
• Headrest/Lumbar Adjustment: Controls the inflation/deflation of the air bladders for headrest and lumbar support. Note: These adjustments may require the remote to be active and may not be saved in memory positions.

5.2. Air Cell Massage

To activate the air cell massage, press the designated massage button on the remote. Cycle through the available programs to find your preferred setting. The air cells will inflate and deflate to provide a therapeutic massage.

5.3. Heat Function

Press the heat button on the remote to turn on the integrated heating element. The heat provides gentle warmth to enhance relaxation. Turn off when not needed.

6. Maintenance

6.1. Cleaning

For routine cleaning, wipe the leather surfaces with a clean, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which can damage the leather. Refer to specific leather care instructions if provided with your chair.

6.2. General Care

• Keep the chair away from direct sunlight and heat sources to prevent fading and drying of the leather.
• Regularly check all connections and fasteners to ensure they are secure.
• Avoid placing heavy or sharp objects on the chair that could cause damage.

7. Troubleshooting

If you encounter issues with your Svago ZGR Newton SV-630 chair, refer to the following common solutions:

• Chair Not Responding: Ensure the power cord is securely plugged into both the chair and a working electrical outlet. Check if the remote control is powered on.
• Motor Noise: Some operational noise from the motors is normal. If the noise becomes excessive or unusual, discontinue use and contact customer support.
• Massage/Heat Not Working: Verify the remote is on and the specific functions are activated. Ensure the chair is receiving power.
• Headrest/Lumbar Support Issues: If air bladders are not holding position or inflating, ensure the remote is active and try readjusting. Persistent issues may indicate a component fault.

For problems not resolved by these steps, please contact Svago customer support.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Svago website. You can also visit the Svago Store on Amazon for additional resources.