FEKOTS 35T1 Ceiling Fan Remote Control Instruction Manual

1. Important Notes Before Use

This product is a replacement remote control only and does not include a receiver or a 12V "A23" battery. This remote control is designed for specific ceiling fan models and does not feature a reverse button.

To ensure compatibility, verify the part number on the back of your original remote. It must match one of the FCC ID/model numbers listed in the compatibility section. If your original remote's part number is not listed, this replacement remote may not function correctly, even if it appears similar.

Image showing the back of a remote control with a battery compartment open, revealing DIP switches and an arrow pointing to a list of compatible FCC IDs and models.

Figure 1.1: Back of the remote control indicating where to find DIP switches and a list of compatible FCC IDs and models. This image helps users identify if their existing remote is compatible by checking its FCC ID or model number.

2. Product Overview

The FEKOTS 35T1 remote control provides convenient operation for compatible 3-speed AC ceiling fans with lighting. It features buttons for fan speed control (High, Medium, Low, Off) and a light dimmer function.

Image of the FEKOTS 35T1 ceiling fan remote control, showing its five buttons for fan speed and light control.

Figure 2.1: Front view of the FEKOTS 35T1 remote control. The remote has five buttons: three for fan speed (High, Medium, Low), one for fan off, and a central button for light control (on/off and dimming).

2.1. Dimensions

Diagram showing the dimensions of the FEKOTS 35T1 remote control and its wall mount holder.

Figure 2.2: Dimensions of the remote control and its accompanying wall mount. The remote measures approximately 3.9 inches (10 cm) in length and 2.7 inches (6.8 cm) in width. The wall holder is 2.7 inches (6.8 cm) wide and 3.2 inches (5.5 cm) high.

3. Compatibility

This remote control is compatible with various ceiling fan models, including those from Harbor Breeze, Allen+Roth, and Kichler. It operates on a frequency of 303.9MHz.

3.1. Compatible Remote Models

The 35T1 remote is a replacement for the following FCC ID/model numbers:

L3HFAN35T / FAN-35T
L3HFAN35T1 / FAN35T1
2AAZPFAN35TI / FAN-35TI
2AAZPFAN53T / FAN-53T
L3HFAN11T / FAN-11T
L3H2010FANHD / FAN-HD
L3H2014FANHD / FAN-HD
FAN-HD5

Note: This remote cannot replace KUJCE9603, A25-TX007R, or A25-TX007R1 models.

Image showing the FEKOTS 35T1 remote and a list of FCC ID/MODEL numbers it can replace, including 2AAZPFAN35T1, L3HFAN35T, L3HFAN35T1, KUJCE9603, CHQ7202T(35T).

Figure 3.1: Visual guide for compatible 35T-type remote models.

Image showing a different remote style (53T type) and a list of FCC ID/MODEL numbers it can replace, including 2AAZPFAN53T/FAN-53T, L3HFAN11T/FAN-11T, KUJCE9103/E08BBT, CHQ7030T/UC7030T(53T).

Figure 3.2: Visual guide for compatible 53T-type remote models.

Image showing another remote style (FAN-HD type) and a list of FCC ID/MODEL numbers it can replace, including L3H2010FANHD/FAN-HD, L3H2014FANHD/FAN-HD, FAN-HD5.

Figure 3.3: Visual guide for compatible FAN-HD type remote models.

Image showing a wall-mounted remote style (UC-9050T type) and a list of FCC ID/MODEL numbers it can replace, including UC-9050T, CHQ9051T, UC7067(9050T).

Figure 3.4: Visual guide for compatible UC-9050T type remote models.

3.2. Compatible Receivers

This transmitter is compatible with FAN30R, FAN28R, FAN18R, and UC7067FMRX receivers.

3.3. Light Bulb Compatibility

The light dimmer function controls the brightness of incandescent lights and dimmable LED/CFL lamps. For other LED and CFL bulbs, it will only control the ON/OFF function.

Halogen & Incandescent lamps: 4.2A/500W Max
Dimmable CFL: 1.5A/150W Max
Dimmable LED: 1.5A/150W Max

Image illustrating compatibility with different bulb types: Halogen & Incandescent, Dimmable CFL, and Dimmable LED, along with their maximum wattage/amperage. It also shows compatibility with 3-speed AC downrod style ceiling fans.

Figure 3.5: Bulb and fan motor compatibility details. The remote supports various bulb types for dimming or on/off control and is compatible with most 3-speed AC downrod style ceiling fans.

4. Setup Instructions

4.1. Battery Installation

The remote requires one 12V "A23" battery (not included). To install, slide open the battery cover on the back of the remote and insert the battery, observing the correct polarity.

4.2. Setting DIP Codes (If original remote is available)

If you have your old remote control, follow these steps:

Locate the DIP switches inside the battery compartment of your old remote. These are typically small switches labeled 1, 2, 3, 4.
Open the battery cover of your new FEKOTS 35T1 remote.
Slide the DIP switches on the new remote to match the exact pattern (ON/OFF positions) of the switches on your original remote.
Replace the battery in the new remote and close the cover. The remote should now be paired with your fan's receiver.

4.3. Pairing with LEARN Button (If original remote is lost or receiver is FAN30R)

If your receiver is a FAN30R model, or if you do not have the original remote to match DIP codes, you can use the LEARN button method:

Disconnect power to the ceiling fan at the circuit breaker or by turning off the electrical box switch.
Restore power to the ceiling fan.
Within 30 seconds of restoring power, press and hold the "LEARN" button on the new remote control. The ceiling fan light should flash to indicate successful pairing.

Note: If your receiver is FAN18R, FAN28R, UC7067FMRX, or another compatible receiver that has DIP switches, you must set the same DIP codes on both the transmitter and receiver as described in section 4.2.

Image illustrating the remote control setting process, showing DIP switches and the 'LEARN' key. It details two situations: matching DIP codes with an original remote, or trying 16 DIP combinations if the original is lost, and using the LEARN button for R30 receivers.

Figure 4.1: Detailed instructions for setting DIP codes and using the LEARN key for remote pairing.

Diagram showing the internal components of the remote control, highlighting the 'Learn Key', 'DIP Switch', and the 'Wall Holder' with its regulator.

Figure 4.2: Internal view of the remote, identifying the Learn Key and DIP switches.

5. Operating Instructions

5.1. Fan Speed Control

The remote features three fan speed buttons (High, Medium, Low) and an OFF button to turn the fan off.

Press the High button for maximum fan speed.
Press the Medium button for moderate fan speed.
Press the Low button for minimum fan speed.
Press the OFF button to turn the fan off.

5.2. Light Control and Dimmer

The central light button controls the ceiling fan's light fixture.

A short press of the light button will turn the light ON or OFF.
To dim or brighten the light (for compatible bulbs), press and hold the light button. Release the button when the desired brightness level is reached. The light will retain this brightness setting when turned off and on again.

Image showing a ceiling fan with lights and the remote control, highlighting the 3-speed control (High/Med/Low/Off) for the fan.

Figure 5.1: Illustration of 3-speed fan control.

Image showing a kitchen with under-cabinet lighting and a ceiling fan remote, illustrating the adjustable light feature with short press for switch and long press for stepless dimming.

Figure 5.2: Illustration of adjustable light control, including dimming.

6. Maintenance

6.1. Battery Replacement

When the remote control's range decreases or its indicator light dims, it is time to replace the 12V "A23" battery. Open the battery compartment on the back of the remote, remove the old battery, and insert a new one, ensuring correct polarity. Dispose of old batteries responsibly.

7. Troubleshooting

Remote not responding:
- Check if the 12V "A23" battery is installed correctly and has sufficient charge. Replace if necessary.
- Verify that the DIP switches on the remote match those on your fan's receiver (if applicable).
- Ensure the remote is within range of the receiver.
- If using the LEARN button method, ensure power was cycled and the button was pressed within 30 seconds.
Light dimmer not working for LED/CFL bulbs:
- Confirm that the LED or CFL bulbs installed are explicitly labeled as "dimmable." Non-dimmable bulbs will only respond to ON/OFF commands.
Fan operates but light does not, or vice versa:
- Ensure all wiring connections to the receiver and fan/light fixture are secure.
- Check the light bulb for proper installation and functionality.

8. Specifications

Product Dimensions: 3.9 x 2.7 x 1.2 inches
Item Weight: 2.72 ounces
Item Model Number: 35T
Batteries Required: 1 x 12V A23 battery (not included)
Special Feature: Ergonomics, lighting prompts, dimming and speed regulation
Color: Cream White
Max Number of Supported Devices: 10 (referring to the number of remotes that can control a single receiver, or vice versa, depending on system configuration)
Compatible Devices: 3-Speed AC Ceiling Fan, 303.9Mhz Ceiling Fan Remote

9. Packing List

The product package includes the following items:

FEKOTS 35T1 Remote Control
Wall Mount Holder
Expansion Screws (for wall mount installation)
Instruction Sheet

Image showing the contents of the product package: the remote control, wall mount holder, expansion screws, and an instruction sheet.

Figure 9.1: Contents of the FEKOTS 35T1 remote control package.

10. Warranty and Support

For product support or inquiries, please refer to the contact information provided with your purchase or visit the manufacturer's official website. Keep your purchase receipt for any warranty claims.

FEKOTS 35T