1. Product Overview
The Buyers Products 1752836 Black Pro Series Steel Topsider Truck Box is designed for secure and weatherproof storage on trucks and trailers. It features durable 12-gauge powder-coated steel construction, a die-cast compression latch system, and a stainless steel bolt-on continuous hinge. This manual provides essential information for the proper installation, operation, and maintenance of your truck box.
Image 1: Front view of the Buyers Products 1752836 Black Pro Series Steel Topsider Truck Box, showing its black finish and double door design with latches.
2. Safety Information
- Always ensure the truck box is securely mounted to prevent shifting during vehicle operation.
- Do not overload the truck box beyond its structural capacity.
- Keep hands and fingers clear of moving parts, such as hinges and latches, when opening or closing the doors.
- Ensure doors are fully latched before driving to prevent accidental opening and loss of contents.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Handle with care and wash hands after contact.
3. Setup and Installation
The Buyers Products 1752836 truck box is shipped fully assembled. Installation involves securely mounting the box to your vehicle or trailer.
3.1 Mounting Considerations
- Choose a mounting location that provides adequate clearance for opening the doors and does not obstruct vehicle lights or other essential components.
- Ensure the mounting surface is strong enough to support the weight of the box and its contents.
- Use appropriate hardware (not included) for your specific vehicle and mounting application. Heavy-duty bolts, washers, and nuts are recommended.
- Drill pilot holes carefully to avoid damaging vehicle components.
- Apply sealant around drilled holes to prevent water intrusion into the vehicle's structure.
3.2 Installation Steps (General Guidelines)
- Position the truck box in the desired location on your vehicle or trailer.
- Mark the mounting points through the pre-drilled holes in the box (if applicable) or determine suitable drilling locations.
- Remove the box and drill the necessary holes in the vehicle's mounting surface.
- Apply corrosion protection to any newly drilled holes in the vehicle.
- Reposition the truck box and secure it using appropriate fasteners. Tighten all fasteners evenly to ensure a stable mount.
- Verify that the box is level and securely attached before loading any contents.
4. Operating Instructions
4.1 Opening the Doors
- Insert the key into the die-cast compression latch and turn to unlock.
- Lift the latch handle to release the door.
- The doors are designed to drop down, supported by detachable 3/16 inch door chains, providing easy access to the contents.
4.2 Closing and Securing the Doors
- Gently lift the door until it aligns with the box opening.
- Push the latch handle down firmly until it clicks into place, indicating it is securely closed.
- Turn the key to lock the latch. Remove the key to prevent unauthorized access.
- Always ensure both doors are fully closed and locked before operating the vehicle.
5. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your truck box.
- Cleaning: Clean the exterior and interior of the box periodically with mild soap and water. Avoid abrasive cleaners that could damage the powder-coated finish.
- Latch and Hinge Lubrication: Apply a small amount of silicone-based lubricant to the latches and stainless steel hinges every 6 months, or more frequently in harsh conditions, to ensure smooth operation and prevent corrosion.
- Seal Inspection: Regularly inspect the automotive bulb seal around the door openings for any signs of wear, cracks, or damage. A damaged seal can compromise the weatherproof integrity of the box. Replace seals as needed.
- Mounting Hardware: Periodically check all mounting hardware for tightness. Re-tighten any loose bolts to maintain secure attachment to the vehicle.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Door difficult to open or close | Lack of lubrication on latches/hinges; debris in latch mechanism; bent door or frame. | Lubricate latches and hinges. Clean any debris from the latch mechanism. Inspect for physical damage and contact support if necessary. |
| Water inside the box | Damaged or improperly seated weather seal; doors not fully closed/latched. | Inspect the automotive bulb seal for damage and replace if needed. Ensure doors are fully closed and latched. |
| Latches not locking | Key not fully inserted; internal mechanism obstruction; damaged lock cylinder. | Ensure the key is fully inserted and turned correctly. Check for obstructions. If the lock is damaged, contact customer support. |
7. Specifications
Image 2: Diagram showing the dimensions of the truck box: 96 inches length, 18 inches width, and 18 inches height.
- Model: 1752836
- Brand: Buyers Products Company
- Material: 12 Gauge Steel (Powder-Coated), Stainless Steel (Hinges)
- Color: Black
- Product Dimensions: 96"L x 18"W x 18"H
- Item Weight: 251 Pounds
- Closure Type: Die-Cast Compression Latch
- Water Resistance Level: Water Repellent
- Style: Double Door
- Special Feature: Made in the USA
- Assembly: Already Assembled
- UPC: 724920195577
8. Warranty and Support
For specific warranty details, please refer to the documentation provided with your purchase or visit the official Buyers Products Company website.
For technical support, replacement parts, or further assistance, please contact Buyers Products Company directly.
- Manufacturer: Buyers Products Company
- Online Store: Visit Buyers Products Company Store on Amazon