1. Product Overview
The Vloee VL-CGD-BQ Rechargeable LED Puck Lights offer versatile lighting solutions with multiple control options and easy installation. Designed for convenience and energy efficiency, these lights are suitable for various indoor applications.
Image 1: Vloee VL-CGD-BQ Rechargeable LED Puck Lights (4 Pcs set).
Key Features:
- USB-C Rechargeable: Built-in 2400mAh lithium battery, fully charges in 3 hours.
- 3 Color Temperatures: 3000K (Warm White), 4500K (Natural White), 6000K (Cool White).
- Dimmable Brightness: 5 levels (20%, 40%, 60%, 80%, 100%).
- Dual Control Modes: Remote control and touch control.
- Timer Function: Auto-off options for 15, 30, 60, or 120 minutes.
- Magnetic Installation: Easy to attach to iron surfaces or use adhesive mounting disks.
2. Package Contents
Ensure all items are present in the package:
- USB Rechargeable LED Puck Light (4 units)
- Remote Control
- Mounting Hardware (adhesive metal disks)
- USB-C Charging Cable
- Instruction Manual (this document)
3. Setup
3.1 Charging the Puck Lights
Before first use, fully charge all puck lights.
- Locate the USB-C charging port on the side of each puck light.
- Connect the provided USB-C charging cable to the port on the puck light and to a compatible USB power source (e.g., wall adapter, computer USB port).
- The indicator light on the puck light will show red during charging and turn green when fully charged.
- A full charge typically takes approximately 3 hours.
Video 1: Demonstrates the USB-C charging process for the Vloee LED Puck Lights, showing the indicator light changing from red to green when fully charged.
3.2 Installation
The puck lights offer two primary installation methods:
- Direct Magnetic Attachment: If installing on an iron or magnetic surface, simply place the puck light directly onto the surface. The built-in magnet will secure it.
- Adhesive Disk Mounting: For non-magnetic surfaces, use the provided adhesive metal disks.
- Clean the desired installation surface thoroughly to ensure it is dust-free and dry.
- Peel off the protective film from one side of an adhesive metal disk.
- Firmly press the adhesive side of the disk onto the clean surface.
- Attach the puck light magnetically to the exposed metal side of the disk.
This magnetic design allows for easy removal of the lights for recharging or repositioning.
Image 2: Step-by-step guide for installing the puck lights on non-magnetic surfaces using adhesive metal disks.
4. Operating Instructions
4.1 Remote Control Operation
The included remote control provides full functionality for managing your puck lights.
- ON/OFF: Press the 'ON' or 'OFF' button to power the lights.
- Color Temperature Adjustment: Use the 'WW' (Warm White - 3000K), 'NW' (Natural White - 4500K), or 'CW' (Cool White - 6000K) buttons to select the desired color temperature.
- Brightness Adjustment: Use the '+' and '-' buttons to increase or decrease brightness. Pre-set levels (20%, 40%, 60%, 80%, 100%) can also be selected directly.
- Timer Settings: Press '15MIN', '30MIN', '60MIN', or '120MIN' to set an auto-off timer.
Image 3: Remote control for Vloee LED Puck Lights, highlighting options for color, brightness, and timer.
4.2 Touch Control Operation
For quick adjustments, the puck lights can also be controlled directly by touch.
- Short Press: Tap the center lens of the light to turn it ON/OFF or to cycle through the available color temperatures.
- Long Press: Press and hold the center lens to smoothly adjust the brightness level. Release when the desired brightness is reached.
Image 4: Illustration of dual control methods: remote and direct touch, for the puck lights.
5. Maintenance
5.1 Recharging
When the light output diminishes, it's time to recharge the puck lights. Simply detach them from their magnetic mounting and follow the charging steps outlined in Section 3.1. A fully charged light can last up to 12 hours on maximum brightness or 40 hours on minimum brightness.
Image 5: Multiple puck lights connected to a USB-C charging cable, indicating their high-capacity rechargeable battery.
5.2 Cleaning
To clean the puck lights, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
6. Troubleshooting
- Light not turning on: Ensure the main power switch on the side of the puck light is in the 'ON' position. Check if the battery is charged.
- Remote not working: Ensure there are no obstructions between the remote and the lights. Check the remote's battery.
- Lights not sticking: Ensure the installation surface is clean and dry before applying adhesive disks.
If you encounter any issues not covered here, please refer to the Warranty and Support section for contact information.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Vloee |
| Model Name | VL-CGD-BQ |
| Color Temperature | 3000K/4000K/5000K (Warm White, Natural White, Cool White) |
| Material | Acrylonitrile Butadiene Styrene |
| Product Dimensions | 3.46"L x 3.46"W x 1.22"H |
| Power Source | Battery Powered (Built-in 2400mAh Lithium-ion Battery) |
| Control Method | Remote, Touch |
| Brightness | 100 Lumen (Max) |
| Average Life | 50000 Hours |
| Water Resistance Level | Not Water Resistant |
| Included Components | Instruction Manual, Mounting Hardware, Remote Control, USB Rechargeable LED Puck Light, USB-C Charging Cable |
For more energy efficiency information, please visit the official EU EPREL database: https://eprel.ec.europa.eu/qr/1469732
8. Warranty and Support
Vloee offers a 12-month hassle-free replacement for your rechargeable LED puck lights. If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact Vloee customer support. Contact details can typically be found on the product packaging or the seller's official website.