Manuals+

Vineyuan BP-264 BC-192

Vineyuan BP-264 NI-MH Battery Charger BC-192 Instruction Manual

For ICOM IC-V80, IC-T70, IC-F27SR, F3002, F4002, F3001, F4001 Walkie Talkies

1. Introduction

This instruction manual provides essential information for the safe and effective use of your Vineyuan BP-264 NI-MH Battery Charger BC-192. Please read this manual thoroughly before operating the charger to ensure proper functionality and to prevent damage to the product or connected devices. This charger is designed for specific ICOM two-way radio models and their compatible BP-264 NI-MH batteries.

2. Safety Information

Observe the following safety precautions to prevent injury or damage:

Disposal: Do not dispose of batteries in household waste. Follow local regulations for proper disposal of NI-MH batteries.

3. Package Contents

Verify that all items listed below are included in your package:

Image showing the BP-264 battery, BC-192 charger base, AC adapter, and belt clip

Figure 3.1: Overview of the BP-264 NI-MH Battery Charger BC-192 package contents, including the battery, charger base, AC adapter, and belt clip.

4. Setup

Follow these steps to set up your charger:

  1. Connect the AC power adapter cable to the DC input port on the back of the BC-192 charger base.
  2. Plug the AC power adapter into a standard 110-240V wall outlet.
  3. The charger is now ready for use.
Image showing the BC-192 charger base and its AC power adapter

Figure 4.1: The BC-192 charger base connected to its AC power adapter, ready for power connection.

5. Operating Instructions

To charge the BP-264 NI-MH battery:

  1. Ensure the charger base is powered on (refer to Section 4: Setup).
  2. Carefully insert the BP-264 NI-MH battery into the charging slot of the BC-192 charger base. Ensure it is seated correctly.
  3. The charging indicator light on the charger base will illuminate red, indicating that the battery is charging.
  4. Once the battery is fully charged, the indicator light will turn green.
  5. Remove the fully charged battery from the charger base.

Important Note: All new batteries are not fully charged from the factory. It is recommended to fully charge the battery before its first use.

Image showing the BP-264 battery inserted into the BC-192 charger base

Figure 5.1: The BP-264 battery correctly placed in the BC-192 charger base for charging.

6. Maintenance

To ensure the longevity and optimal performance of your charger and battery:

7. Troubleshooting

Refer to the table below for common issues and their solutions:

IssuePossible Cause / Solution
Charger indicator flashes red/green without battery.This is normal behavior. The charger is in standby mode, awaiting a battery.
Battery does not charge (no red light).
  • Ensure the AC adapter is securely plugged into both the charger base and the wall outlet.
  • Verify the battery is correctly seated in the charging slot.
  • Check for any obstructions or damage to the battery or charger contacts.
  • Ensure the battery is a compatible BP-264 NI-MH type.
Battery charges slowly or not fully.
  • Ensure the charger is connected to a stable power source.
  • The battery may be nearing the end of its lifespan and may need replacement.

8. Specifications

BP-264 NI-MH Battery

Image showing the dimensions of the BP-264 battery

Figure 8.1: Detailed dimensions of the BP-264 NI-MH battery.

BC-192 Charger Base

9. Compatible Radios and Batteries

Compatible ICOM Two-Way Radios

Compatible Battery Model

Image showing an ICOM IC-F3011 radio next to the BC-192 charger base and adapter

Figure 9.1: An ICOM IC-F3011 radio demonstrating compatibility with the BC-192 charger.

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase for any warranty claims.