SKEETER HAWK Solar Tiki Torch Zapper Instruction Manual

Introduction

Thank you for choosing the SKEETER HAWK Solar Tiki Torch Zapper. This device is designed to attract and eliminate flying insects while providing an ambient flickering flame effect. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your new device.

Important Safety Information

Please read all instructions carefully before using the product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not touch the electrical grid with hands or metal objects.
• Keep out of reach of children and pets.
• Do not immerse the unit in water or other liquids. The unit has an IPX4 water-resistant rating, meaning it is protected against splashing water from any direction, but it is not waterproof.
• Do not use near flammable liquids or gases.
• Ensure the unit is placed in a stable position to prevent tipping.
• Only use the included components and accessories.
• Do not attempt to repair or modify the unit. Contact customer support for assistance.
• Clean the unit regularly as instructed to maintain optimal performance.

Package Contents

Verify that all components are present in the package:

• SKEETER HAWK Solar Tiki Torch Zapper Unit
• Stainless-steel pole
• Cleaning brush
• Instruction Manual (this document)

Image: The main SKEETER HAWK Solar Tiki Torch Zapper unit, showing its design with the flickering flame and UV light.

Setup and Installation

The SKEETER HAWK Solar Tiki Torch Zapper offers versatile installation options:

Option 1: Pole Installation

1. Assemble the stainless-steel pole sections by screwing them together firmly.
2. Attach the zapper unit to the top of the assembled pole.
3. Select a location in your yard or garden that receives direct sunlight for at least 6-8 hours daily to ensure optimal solar charging.
4. Insert the pole firmly into the ground, ensuring the unit is stable and upright.

Image: Three SKEETER HAWK Solar Tiki Torch Zappers shown at varying heights, illustrating the use of the pole for outdoor placement. One unit shows blue UV light, another shows orange flame, and a third shows both.

Option 2: Tabletop Use

• The zapper unit can be used independently without the pole.
• Place the unit on a flat, stable surface such as a patio table or deck railing.
• Ensure the solar panel on top of the unit is exposed to direct sunlight for charging.

Initial Charging and Solar Operation

Before first use, allow the unit to charge in direct sunlight for a full day (at least 8 hours). The integrated lithium battery will store solar energy for evening operation.

• The unit features an automatic on/off sensor. It will automatically turn on at dusk and turn off at dawn, provided there is sufficient charge.
• Optimal performance requires consistent exposure to direct sunlight. Shaded areas will reduce charging efficiency and run time.

Image: A close-up view of the top of the SKEETER HAWK Solar Tiki Torch Zapper, highlighting its solar panel for charging.

Image: Two SKEETER HAWK Solar Tiki Torch Zappers side-by-side. One is illuminated, indicating it's active in low light, while the other is off, demonstrating the automatic light sensor function.

Operating Instructions

The SKEETER HAWK Solar Tiki Torch Zapper features three distinct light modes:

• Lantern Only: Provides the realistic flickering flame effect for ambiance without the insect zapping function.
• UV Zapper Only: Activates the dual-band UV light for insect attraction and elimination, without the flame effect.
• Lantern + UV Zapper: Combines both the flickering flame and the UV zapper for ambiance and insect control.

To cycle through the modes, locate the mode button (usually near the top or side of the unit) and press it repeatedly until the desired mode is active.

Image: Three SKEETER HAWK Solar Tiki Torch Zappers displayed, each showing a different operating mode: one with only blue UV light, one with only orange flickering flame, and one with both active.

Image: A close-up view of the SKEETER HAWK Solar Tiki Torch Zapper, highlighting the internal 1,300 volt electrical grid designed for insect elimination.

Image: A detailed view of the SKEETER HAWK Solar Tiki Torch Zapper, emphasizing its patented advanced dual-band UV light technology for enhanced insect attraction.

Image: The SKEETER HAWK Solar Tiki Torch Zapper illuminated, showcasing its realistic flickering flame effect.

Maintenance and Cleaning

Regular cleaning ensures the longevity and effectiveness of your zapper.

1. Power Off: Ensure the unit is off before cleaning.
2. Remove Base: The removable base twists off for easy access to the insect collection tray.
3. Empty Tray: Carefully empty any accumulated insect debris from the tray.
4. Clean Grid: Use the included cleaning brush to gently remove any insects stuck to the electrical grid. Do not use water or cleaning solutions directly on the grid.
5. Wipe Exterior: The exterior can be wiped with a damp cloth. Do not use abrasive cleaners.
6. Reassemble: Reattach the base securely.

Clean the unit at least once a week, or more frequently depending on insect activity.

Troubleshooting

If you encounter issues with your SKEETER HAWK Solar Tiki Torch Zapper, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact SKEETER HAWK customer support.

Product Specifications

Warranty and Customer Support

For warranty information or technical support, please contact SKEETER HAWK customer service. Refer to the product packaging or the official SKEETER HAWK website for the most current contact details.

When contacting support, please have your model number (Nebo - SKE-ZAP-1008) and purchase date available.