Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your XLUX Solar Lights. These LED lamps are designed for outdoor use on steps, decks, pathways, yards, stairs, and fences, offering a non-glaring warm white light. They feature a durable black metal housing and are rainproof for reliable performance in various weather conditions.
Key Features:
- Non-Glaring Warm White Light: Provides sufficient illumination for visibility without being overly bright, ideal for ambient or accent lighting.
- Auto ON/OFF: Automatically turns on at dusk and off at dawn, requiring no manual operation once installed.
- Metal Housing, Sturdy Design: Constructed with stainless steel for enhanced durability compared to plastic alternatives.
- Efficient Solar Panel: Equipped with a premium mono-crystalline silicon solar panel and a low self-discharging Ni-MH battery for excellent performance even after prolonged sun exposure and storms.
- Versatile Installation: Can be mounted with included screws or outdoor double-sided tape (not included).
Setup and Installation
Before installation, ensure the lights are placed in direct sunlight for at least 4 hours to allow for initial charging. The switch should be in the "ON" position for automatic operation.
Package Contents:
- XLUX Solar Lights (6 units)
- Mounting Screws
- Plastic Anchors
Installation Methods:
You can choose between screw mounting or adhesive mounting based on your surface and preference.
Figure 1: Two types of installation methods for the solar lights. The left shows installation with screws, indicating a 3-inch (76.2 mm) distance between screw holes. The right shows installation with double-sided tape (not included).
Method 1: Screw Mounting (Recommended for permanent installation)
- Select Location: Choose an outdoor location that receives at least 4 hours of direct sunlight daily.
- Mark Drill Points: Use the provided installation template or measure 3 inches (76.2 mm) between two points on your desired surface.
- Drill Holes: Drill pilot holes at the marked points.
- Insert Anchors: Insert the plastic anchors into the drilled holes (if installing into masonry or drywall).
- Attach Screws: Drive the screws into the anchors/surface, leaving a small portion exposed.
- Mount Light: Align the keyhole slots on the back of the solar light with the exposed screws and slide the light down to secure it.
- Activate: Ensure the ON/OFF switch on the back of the light is in the "ON" position.
Video 1: Official XLUX Outdoor Solar Lights installation guide, demonstrating how to use the included screws for mounting and activating the light.
Method 2: Adhesive Mounting (Double-sided tape not included)
- Clean Surface: Ensure the mounting surface is clean, dry, and smooth.
- Apply Tape: Apply strong outdoor double-sided tape to the back of the solar light.
- Press Firmly: Press the light firmly onto the desired surface for several seconds.
- Activate: Ensure the ON/OFF switch on the back of the light is in the "ON" position.
Note: Some users have also successfully used outdoor Velcro strips with adhesive for installation.
Figure 2: Detailed dimensions of the XLUX solar light (3.94"L x 1.18"W x 3.19"H) and the placement of the ON/OFF switch on the back panel.
Operating Instructions
The XLUX Solar Lights are designed for automatic operation.
- Initial Activation: Locate the push button switch on the back of the light. Press it to the "ON" position.
- Automatic Charging: During the day, the integrated mono-crystalline silicon solar panel will automatically charge the internal Ni-MH battery. This process typically takes 6-8 hours of direct sunlight.
- Automatic Illumination: At dusk, the light sensor will detect the decrease in ambient light and automatically turn on the warm white LED lamp. The light will remain illuminated for 8-12 hours, depending on the charge received during the day.
- Automatic Shut-off: At dawn, the light sensor will detect the increase in ambient light and automatically turn off the LED lamp, initiating the charging cycle again.
Important: These lights are NOT motion-activated. They operate solely based on ambient light levels.
Figure 3: The solar light automatically charges in the sun for 6-8 hours during the day and automatically lights up for 8-12 hours at night.
Maintenance
To ensure optimal performance and longevity of your XLUX Solar Lights, follow these simple maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and efficient charging.
- Clear Obstructions: Ensure no leaves, snow, or other obstructions cover the solar panel, especially during winter months.
- Battery Replacement: The Ni-MH battery is designed for long-term use. If you notice a significant decrease in light duration after several years, the battery may need replacement. Consult the manufacturer for compatible replacement batteries.
- Inspect for Damage: Periodically check the light housing and mounting for any signs of wear or damage. Address any issues promptly to maintain the rainproof integrity.
Figure 4: The solar lights automatically charge during the day and illuminate at night, demonstrating their low-maintenance operation.
Troubleshooting
If your XLUX Solar Light is not functioning as expected, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | 1. ON/OFF switch is in "OFF" position. 2. Insufficient sunlight for charging. 3. Solar panel is dirty or obstructed. 4. Battery is depleted or faulty. | 1. Ensure the switch is in the "ON" position. 2. Relocate the light to an area with at least 4 hours of direct sunlight. 3. Clean the solar panel with a soft, damp cloth. 4. Allow several days for full charge. If issue persists, consider battery replacement. |
| Light duration is short. | 1. Insufficient charging time/sunlight. 2. Solar panel is dirty or obstructed. 3. Battery capacity has degraded. | 1. Ensure optimal sunlight exposure (6-8 hours). 2. Clean the solar panel regularly. 3. Replace the battery if it's old or not holding a charge. |
| Light flickers or is dim. | 1. Partial charge. 2. Loose connection. 3. Faulty LED. | 1. Ensure full charge by placing in direct sunlight. 2. Check internal connections (if accessible and safe). 3. Contact customer support if LED is faulty. |
Product Specifications
| Brand: | XLUX |
| Model Number: | A0019#6 |
| Model Name: | Black case warm lights |
| Color: | Black Metal Housing-Warm Light |
| Material: | Metal, Stainless Steel |
| Power Source: | Solar Powered |
| Light Source: | LED |
| Light Color: | Warm White (2900 Kelvin) |
| Brightness: | 20 Lumen |
| Voltage: | 1.2 Volts |
| Water Resistance Level: | Waterproof (Rainproof) |
| Item Dimensions (L x W x H): | 3.94"L x 1.18"W x 3.19"H |
| Item Weight: | 97.6 Grams |
| Number of Items: | 6 |
| Control Method: | Touch (Push Button Switch) |
| Mounting Type: | Wall Mount (Screw fixing & Tape fixing) |
Warranty Information
The XLUX Solar Lights come with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. Please retain your proof of purchase for any warranty claims.
For warranty service or inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased.
Customer Support
For any questions, technical assistance, or support regarding your XLUX Solar Lights, please refer to the following:
- Online Resources: Visit the product page on Amazon.com for FAQs and additional information.
- Seller Contact: Contact "Fangtan" (the seller) directly through your Amazon order history for specific product support.
We are committed to providing excellent customer service and ensuring your satisfaction with XLUX products.