BugMD BG-BLK85202-04

BugMD Pest Blaster Kit Instruction Manual

Model: BG-BLK85202-04

1. Product Overview

The BugMD Pest Blaster Kit provides a plant-powered solution for controlling various indoor and outdoor pests. This kit includes essential oil concentrates and a reusable sprayer designed for broad application. The formula utilizes natural plant oils to target pests effectively.

BugMD Pest Blaster Kit with text 'Plant-Powered Solution Safe for: Kids, Pets, Plants when used as directed'

Image: BugMD Pest Blaster Kit, highlighting its plant-powered solution and safety for kids, pets, and plants when used as directed.

2. Setup Instructions

2.1. Battery Installation for Sprayer

The automatic sprayer requires 4 AA batteries (not included). Follow these steps to install them:

  1. Locate the battery compartment on the sprayer handle.
  2. Use a small screwdriver to unscrew the battery hatch.
  3. Insert 4 AA batteries, ensuring correct polarity (+/-).
  4. Replace the battery hatch and secure it with the screw.

Video: Demonstrates the proper installation of batteries into the sprayer unit.

Sprayer with battery compartment open and 4 AA batteries shown

Image: Close-up of the sprayer handle indicating the need for 4 AA batteries for operation.

2.2. Mixing the Solution

Prepare the pest control solution by following these simple steps:

  1. Open the Pest Blaster pouch and add the recommended amount of water.
  2. Pour the entire contents of the essential oil concentrate bottle(s) into the pouch.
  3. Securely close the pouch and shake well to ensure the concentrate is thoroughly mixed with the water.
Three steps showing how to mix the BugMD solution: add water, add concentrate, shake and spray

Image: Visual guide demonstrating the three steps for mixing the BugMD solution: adding water, adding concentrate, and shaking before use.

Hands pouring BugMD essential oil concentrate into the Pest Blaster pouch

Image: A person pouring the BugMD essential oil concentrate into the Pest Blaster mixing pouch.

3. Operating Instructions

Once the solution is mixed and batteries are installed, the Pest Blaster is ready for use. The sprayer features an adjustable nozzle for various application needs.

  1. Attach the sprayer hose to the prepared Pest Blaster pouch.
  2. Adjust the nozzle to achieve the desired spray pattern (e.g., fine mist for broad coverage, stream for targeted application).
  3. Point the nozzle towards the target area and press the trigger on the sprayer handle to begin spraying.
  4. Apply the solution to areas where pests are observed or suspected, such as cracks, crevices, baseboards, window frames, and outdoor perimeters.
BugMD Pest Blaster Kit showing sprayer features like adjustable nozzle and suitability for indoor and outdoor use

Image: The BugMD Pest Blaster Kit highlighting its powerful spray, adjustable nozzle, and suitability for both indoor and outdoor applications.

Person spraying BugMD solution around the exterior of a house near a garden

Image: A user applying the BugMD solution to the outdoor perimeter of a home, demonstrating its use in gardens and around foundations.

4. Safety Guidelines

Always prioritize safety when using any pest control product. The BugMD Pest Blaster Kit is formulated with plant oils and is generally considered family-safe when used as directed.

  • Avoid Contact with Eyes: In case of contact, flush eyes thoroughly with water. If irritation persists, seek medical attention.
  • Keep Out of Reach of Children and Pets: Store the product in a secure location away from children and pets.
  • Ventilation: Use in well-ventilated areas, especially when applying indoors.
  • Surface Compatibility: Test on an inconspicuous area before applying to entire surfaces to ensure no staining or damage occurs.
  • Do Not Ingest: This product is for external pest control use only. Do not ingest.

5. Ingredients

The BugMD Pest Blaster Kit utilizes a plant-powered formula. The active and inert ingredients are as follows:

Table listing active ingredients Clove Oil (0.5%), Cottonseed Oil (0.5%), and inert ingredients (99.0%)

Image: Detailed breakdown of active and inert ingredients in the BugMD Pest Blaster solution.

Ingredient TypeIngredientPercentage
Active IngredientsClove Oil0.5%
Active IngredientsCottonseed Oil0.5%
Inert Ingredients*Total99.0%

*Inert ingredients include Distilled Water, Soap, Glycerin, Myristic Acid, Potassium Oleate, and Potassium Stearate.

6. Maintenance and Storage

The Pest Blaster Kit is designed for long-term use and refilling.

  • Refilling: When the solution is depleted, clean the pouch thoroughly before refilling with new BugMD concentrates and water as per mixing instructions.
  • Cleaning: Periodically clean the sprayer nozzle to prevent clogs. Rinse with water after each use, especially if storing for extended periods.
  • Storage: Store the Pest Blaster Kit in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the sprayer is disconnected from the pouch and stored separately if not in immediate use. Remove batteries if storing for long periods to prevent corrosion.

7. Troubleshooting

If you encounter issues with your BugMD Pest Blaster Kit, refer to the following common problems and solutions:

ProblemSolution
Sprayer does not activate or spray
  • Check battery installation: Ensure 4 AA batteries are correctly inserted with proper polarity.
  • Replace batteries: If batteries are old or depleted, replace them with fresh ones.
  • Check connections: Ensure the sprayer hose is securely attached to the pouch.
Sprayer produces a weak stream or no spray
  • Check for clogs: Inspect the nozzle for any debris and clear it if necessary.
  • Ensure siphon tube is clear: Make sure the siphon tube inside the pouch is not bent, blocked, or stuck. Gently push it down if it appears dislodged.
  • Verify solution level: Ensure there is enough solution in the pouch for the siphon tube to draw from.
  • Shake solution: Re-shake the pouch to ensure the concentrate is fully mixed and not settled.
Solution leaks from sprayer or pouch
  • Tighten connections: Ensure all connections, including the hose to the pouch and the nozzle to the sprayer, are tightly secured.
  • Inspect for damage: Check the pouch and sprayer for any visible cracks or damage. If damaged, discontinue use and replace.

8. Product Specifications

  • Model Number: BG-BLK85202-04
  • Brand: BugMD
  • Item Form: Aerosol (when sprayed)
  • Liquid Volume: 11.1 fluid ounces (concentrate)
  • Unit Count: 32 Ounce (mixed solution)
  • Active Ingredients: Clove Oil, Cottonseed Oil
  • Target Species: Insects
  • Power Source: 4 AA Batteries (for sprayer, not included)
  • GTIN (UPC): 810098571852

9. Warranty and Customer Support

Specific warranty information for the BugMD Pest Blaster Kit is not provided in the product details. For any product-related inquiries, technical assistance, or to report issues, please contact BugMD customer support directly.

You can typically find contact information on the product packaging or the official BugMD website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.