1. Introduction
This manual provides comprehensive instructions for the Ibanez Lo-Pro Edge Gold Tremolo Arm, model 2LE21G. This accessory is designed to enhance the functionality and aesthetic appeal of compatible Ibanez tremolo systems.
Figure 1.1: The Ibanez Lo-Pro Edge Gold Tremolo Arm (2LE21G) in its original packaging.
2. Product Overview
Key Features
- Designed specifically for Ibanez Edge and Lo-Pro Edge tremolo bridges.
- Features a durable and aesthetically pleasing gold finish.
- Constructed from high-quality Carbon Steel for longevity and performance.
Figure 2.1: Close-up view of the Ibanez Lo-Pro Edge Gold Tremolo Arm, highlighting its gold finish and design.
3. Setup and Installation
Installation Guide
The Ibanez Lo-Pro Edge Gold Tremolo Arm is designed for straightforward installation into compatible Ibanez tremolo bridge systems. Follow these steps for proper installation:
- Identify the tremolo arm receptacle on your Ibanez Edge or Lo-Pro Edge tremolo bridge.
- Gently insert the tremolo arm into the receptacle.
- Apply slight pressure and rotate the arm until it seats securely. The arm is designed to be a push-in type.
- Test the arm's movement to ensure it operates smoothly without excessive play. If the fit is too tight or too loose, check for any obstructions or consult a qualified guitar technician.
Important Note: This tremolo arm is specifically designed for Ibanez Edge and Lo-Pro Edge tremolo systems. Use with incompatible systems may result in damage or improper function.
4. Operating Instructions
Using Your Tremolo Arm
Once installed, the tremolo arm allows for pitch modulation (vibrato) by applying pressure to raise or lower the bridge. This enables expressive playing techniques.
- To lower pitch: Gently push the tremolo arm downwards towards the guitar body.
- To raise pitch: Gently pull the tremolo arm upwards away from the guitar body.
- The arm's position can be adjusted for comfort by rotating it within its receptacle.
Caution: Excessive force or aggressive use of the tremolo arm can lead to tuning instability or damage to the bridge system. Always use the arm with controlled movements.
5. Maintenance
Care and Cleaning
Proper maintenance will ensure the longevity and optimal performance of your tremolo arm.
- Cleaning: Wipe the tremolo arm with a soft, dry cloth after each use to remove fingerprints and sweat, which can tarnish the gold finish. For deeper cleaning, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners.
- Storage: When not in use, store the tremolo arm in a clean, dry environment. If the guitar is being stored for an extended period or transported, detaching the arm may be beneficial.
- Bushing Check: Periodically inspect the plastic bushing at the base of the tremolo arm for signs of wear. The product includes an extra bushing, indicating that these parts may require replacement over time due to normal wear and tear. If the arm becomes excessively loose or wobbly, consider replacing the bushing.
6. Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Tremolo arm is too loose. | Worn bushing or incorrect seating. | Ensure the arm is fully seated. Replace the bushing if worn (an extra bushing is included with the product). |
| Tremolo arm is too tight or difficult to insert. | Obstruction in the receptacle or new bushing. | Check for debris in the receptacle. New bushings can be tight initially; gentle, firm force may be required for the first insertion. |
| Tuning instability after using the tremolo arm. | Not directly related to the arm itself, but bridge setup or string issues. | Ensure strings are properly stretched and the tremolo bridge is balanced. Consult a qualified guitar technician for bridge adjustments if necessary. |
| Gold finish tarnishing or dulling. | Exposure to sweat, oils, humidity, or lack of cleaning. | Clean regularly with a soft, dry cloth. For deeper cleaning, use a slightly damp cloth with mild soap and dry immediately. Avoid abrasive materials. |
7. Specifications
Product Specifications
- Model Number: 2LE21G
- Color: Gold
- Material: Carbon Steel
- Item Weight: Approximately 1.54 ounces (43.66 grams)
- Product Dimensions: Approximately 7.09 x 1.77 x 0.24 inches (18.0 x 4.5 x 0.6 cm)
- Compatibility: Ibanez Edge and Lo-Pro Edge tremolo bridges
Note: Specifications are subject to change without prior notice.
8. Warranty and Support
Warranty Information
Specific warranty details for the Ibanez Lo-Pro Edge Gold Tremolo Arm (2LE21G) are not provided within this manual. For comprehensive warranty claims or detailed support, please refer to the official Ibanez website or contact Ibanez customer service directly.
Customer Support
For further assistance, technical questions, or to inquire about replacement parts, please visit the official Ibanez support page or contact their authorized service centers. Always ensure you are consulting official Ibanez resources for accurate and up-to-date information.
