1. Safety Instructions
Please read all instructions carefully before using the Ankrs Flame Essential Oil Diffuser. Keep this manual for future reference.
- Always place the diffuser on a flat, stable surface.
- Do not overfill the water tank. Ensure water level does not exceed the maximum line.
- Use only clean tap water or distilled water.
- Add only 2-3 drops of essential oil per 100ml of water. Excessive oil may damage the unit.
- Keep out of reach of children and pets.
- Do not block the mist outlet.
- Unplug the diffuser from the power outlet when not in use or before cleaning.
- The diffuser features a water-sensing auto-off function, which automatically shuts off the unit when water runs out to ensure safety and extend product life.
2. Product Overview
The Ankrs Flame Essential Oil Diffuser (Model H2) combines aromatherapy with a realistic flame visual effect. It operates quietly and includes a remote control for convenient use.
Image: Overview of the Ankrs Flame Aroma Diffuser highlighting its key features.
Package Contents:
- Ankrs Flame Essential Oil Diffuser (Model H2)
- Power Adapter
- Remote Control
- User Manual (this document)
Key Features:
- Realistic Flame Visual Effect: LED lighting combined with nano mist creates a simulated flame.
- Aromatherapy: Disperses essential oil scents into the air.
- Air Humidification: Generates approximately 30ml of cool mist per hour.
- Ultra-Quiet Operation: Noise level below 24dB.
- Remote Control: Allows convenient operation from up to 10 meters.
- Timer Settings: Includes 2H, 4H, and Constant modes.
- Water-Sensing Auto-Off: Automatically shuts down when water is low.
3. Setup
- Unpack: Carefully remove all components from the packaging.
- Place the Diffuser: Position the diffuser on a stable, flat surface away from direct sunlight or heat sources.
- Remove the Cover: Gently lift the top cover of the diffuser.
- Fill Water Tank: Using the provided measuring cup, fill the water tank with clean tap water or distilled water. Do not exceed the 240ml maximum fill line.
Image: Filling the water tank up to the maximum level.
- Add Essential Oil: Add 2-3 drops of your preferred essential oil directly into the water tank. Adjust the amount based on personal preference, but do not exceed recommended limits.
- Replace Cover: Securely place the top cover back onto the diffuser.
- Connect Power: Plug the power adapter into the diffuser's power port, then plug the adapter into a standard electrical outlet.
4. Operating Instructions
The diffuser can be operated using the buttons on the unit or the included remote control.
Using the Unit Buttons:
Image: Diffuser control panel and internal components.
- Power/Mist Button: Press once to turn on the mist and flame effect. Press again to cycle through mist modes (continuous, intermittent). Hold to turn off.
- Light Button: Press once to turn on the flame light. Press again to cycle through light modes (Dim, Bright, Nature-like). Hold to turn off the light.
- Timer Button: Press to set the operating timer (2H, 4H, or Constant). The corresponding indicator light will illuminate.
Using the Remote Control:
Ensure the remote control is pointed towards the diffuser's receiver port for optimal functionality.
Image: Diffuser with remote control, highlighting the receiver port.
- Power Button (
): Turns the diffuser on/off. - Timer Button (): Cycles through timer settings (2H, 4H, Constant).
- Light Button (): Adjusts the flame light modes (Dim, Bright, Nature-like) or turns it off.
- Mist Button (): Adjusts the mist output intensity.
Video: A demonstration of the Ankrs Flame Diffuser in operation, showcasing its flame effect and mist output.
5. Maintenance
Regular cleaning is essential to ensure optimal performance and extend the lifespan of your diffuser.
- Unplug: Always unplug the diffuser before cleaning.
- Empty Water: Pour out any remaining water from the tank.
- Clean Water Tank: Wipe the inside of the water tank with a soft cloth or napkin weekly. For stubborn residue, use a cotton swab dipped in white vinegar to gently clean the ultrasonic plate.
- Clean Exterior: Wipe the exterior of the diffuser with a soft, damp cloth.
- Do Not Submerge: Never submerge the entire unit in water or rinse it under running water.
- Air Dry: Allow all parts to air dry completely before reassembling or storing.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist or weak mist | Low water level; Ultrasonic plate dirty; Mist outlet blocked. | Add water; Clean the ultrasonic plate with a cotton swab and vinegar; Ensure mist outlet is clear. |
| Diffuser does not turn on | No power; Adapter not connected properly. | Check power connection; Ensure adapter is securely plugged in. |
| Remote control not working | Battery depleted; Not pointing at receiver; Obstruction. | Replace remote battery; Point remote directly at the diffuser's receiver port; Remove any obstructions. |
| Unusual noise | Water level too low; Unit not on a flat surface. | Add water; Place the diffuser on a stable, flat surface. |
7. Specifications
Image: Dimensions of the Ankrs Flame Essential Oil Diffuser.
- Brand: Ankrs
- Model Name: H2
- Material: Plastic (BPA Free)
- Color: Dark Wood
- Capacity: 240 Milliliters
- Runtime: Up to 15 hours
- Power Source: Corded Electric
- Wattage: 10 watts
- Light Source: LED
- Automatic Shutoff: Yes
- Item Weight: 1 Pound
- Item Dimensions (L x W x H): 8"L x 3"W x 5"H
- Coverage Area: Small to medium room (approx. 19 Square Meters)
8. Warranty & Support
The Ankrs Flame Essential Oil Diffuser (Model H2) comes with a 2-year manufacturer's warranty.
For technical support, warranty claims, or any questions regarding your product, please contact Ankrs customer service through the retailer's platform or visit the official Ankrs website for contact information.