Introduction
This manual provides instructions for the DIGITMON 6FT 3-Prong AC Power Cord. This product is designed to supply power to compatible electronic devices. Please read this manual carefully before use to ensure proper and safe operation.
This package includes two (2) 6-foot (1.8 meter) 3-prong AC power cords.
Safety Information
- Ensure the power cord is compatible with your device's power input requirements.
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Avoid placing the cord in high-traffic areas where it could be tripped over or damaged.
- Do not overload electrical outlets.
- Keep the power cord away from water and excessive heat.
- This power cord is UL Certified, indicating it meets specific safety standards.
Compatibility
This DIGITMON 6FT 3-Prong AC Power Cord is specifically compatible with the Compaq QVision 210 Color Monitor. It is also suitable for various other devices that utilize a standard 3-prong (NEMA 5-15P to IEC C13) power connection, such as:
- Printers
- Scanners
- Fax Machines
- Televisions (TVs)
- Power Supplies
- All-in-One Printers
- Desktop Computers
Always verify your device's power input type before connecting the cord.
Setup
- Inspect the Cord: Before connecting, visually inspect the power cord for any signs of damage. Do not use if damaged.
- Connect to Device: Locate the 3-pin power input port on your compatible device (e.g., Compaq QVision 210 Color Monitor). Insert the IEC C13 connector (the female end) of the power cord firmly into this port.
- Connect to Power Outlet: Insert the NEMA 5-15P plug (the male end) of the power cord into a standard 3-prong AC wall outlet or surge protector.
- Power On: Once both ends are securely connected, you may power on your device.
Image: The DIGITMON 6FT 3-Prong AC Power Cord, illustrating the NEMA 5-15P plug and the IEC C13 connector.
Operating
The DIGITMON 6FT 3-Prong AC Power Cord operates by providing electrical power from a wall outlet to your compatible electronic device. No specific operational steps are required for the cord itself beyond proper connection.
- Ensure the cord is not bent sharply or crimped during use.
- Avoid placing heavy objects on the cord.
- If the device is not receiving power, check both connections and the power outlet.
Maintenance
Minimal maintenance is required for the DIGITMON AC Power Cord.
- Cleaning: Disconnect the cord from both the device and the power outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners directly on the cord or connectors.
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or kinking, which can damage the internal wires. Store in a cool, dry place.
- Inspection: Periodically inspect the cord for any signs of wear, cuts, or damage to the insulation or connectors. Replace immediately if damage is found.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Cord not fully connected. | Ensure both ends of the power cord are securely plugged into the device and the wall outlet. |
| Device not powering on. | No power from outlet. | Test the wall outlet with another device or check the circuit breaker. |
| Device not powering on. | Damaged power cord. | Inspect the cord for visible damage. If damaged, discontinue use and replace. |
| Loose connection. | Worn connectors or incompatible port. | Ensure the cord is fully inserted. If it remains loose, the cord or device port may be worn. Verify compatibility. |
Specifications
- Brand: DIGITMON
- Model: 3-Prong AC Power Cord
- Length: 6 feet (1.8 meters)
- Gauge: 18 AWG
- Connector Type (Male): NEMA 5-15P (3-prong grounded plug)
- Connector Type (Female): IEC C13
- Color: Black
- Certification: UL Certified
- Package Contents: 2 x 6FT 3-Prong AC Power Cords
- Internal Construction: Tinned copper wire core, braided shielding, AI foil shielding (for enhanced durability and reliability)
Image: Diagram illustrating the internal construction of the power cord, including tinned copper wire core, braided shielding, and AI foil shielding.
Warranty and Support
This DIGITMON product comes with a 2-Year Warranty. Additionally, a 30-Day Money Back Satisfaction Guarantee is offered.
For warranty claims, technical support, or any inquiries, please contact DIGITMON customer service through the retailer where the product was purchased or visit the official DIGITMON store page on Amazon: