Introduction
Thank you for choosing the Elicto ES-800 Vacuum Stand. This freestanding charging dock and organizer is specifically designed to complement your Elicto ES-800 Cordless 5-in-1 Vacuum Spin Mop Cleaner, providing a convenient and space-saving solution for storage and charging. Please read this manual carefully before assembly and use to ensure proper function and longevity of your product.
Important Safety Information
- Ensure the stand is assembled on a flat, stable surface to prevent tipping.
- Do not overload the accessory holders.
- Keep the stand away from heat sources and direct sunlight.
- This stand is designed for indoor use only.
- Keep out of reach of children and pets.
Package Contents
Please check the package for the following components:
- Base Plate (1)
- Main Support Pole (1)
- Vacuum Docking Bracket (1)
- Accessory Holders (2-3, quantity may vary based on model revision)
- Assembly Screws and Screwdriver (1 set)
Image: Components of the Elicto ES-800 Vacuum Stand, showing the base, pole, and docking bracket.
Assembly Instructions
The Elicto ES-800 Vacuum Stand is designed for easy assembly without specialized tools. A screwdriver is included for your convenience.
- Attach the Main Support Pole to the Base Plate: Align the bottom of the main support pole with the designated slot on the base plate. Secure it using the provided screws from the underside of the base plate. Ensure it is firmly tightened for stability.
- Install the Vacuum Docking Bracket: Slide the vacuum docking bracket onto the main support pole from the top. Position it at a comfortable height and secure it with the screws provided, typically from the back of the bracket into the pole.
- Attach Accessory Holders: Slide the accessory holders onto the main support pole. These can be positioned at various heights to accommodate your vacuum's attachments. Secure them in place using the provided screws.
Image: Side view of the assembled Elicto ES-800 Vacuum Stand, ready for use.
Image: The Elicto ES-800 Vacuum Stand with various vacuum accessories neatly stored on its holders.
Operating Instructions
This stand provides a convenient location for storing and charging your Elicto ES-800 Cordless Vacuum.
- Docking the Vacuum: Gently place your Elicto ES-800 Cordless Vacuum onto the docking bracket. Ensure the vacuum's charging port aligns with the charging pins on the stand (if applicable for your vacuum model and stand configuration). The vacuum should sit securely in the bracket.
- Storing Accessories: Utilize the accessory holders to store your vacuum's various attachments, such as the mattress brush, mop kit, crevice cleaner, and bristles. This keeps them organized and easily accessible.
- Charging: If your stand is connected to a power source and your vacuum is correctly docked, it will begin charging. Refer to your Elicto ES-800 vacuum manual for specific charging indicators.
Image: The Elicto ES-800 Cordless Vacuum securely docked on its freestanding stand, ready for charging or storage.
Maintenance
To keep your Elicto ES-800 Vacuum Stand in optimal condition:
- Wipe the stand regularly with a soft, damp cloth to remove dust and dirt.
- Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
Troubleshooting
If you encounter any issues with your Elicto ES-800 Vacuum Stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand feels unstable or wobbly. | Screws are loose; uneven surface. | Ensure all assembly screws are tightened. Move the stand to a flat, level surface. |
| Vacuum does not dock securely. | Incorrect alignment; obstruction. | Re-align the vacuum with the docking bracket. Check for any debris or obstructions in the docking area. |
| Accessories do not fit on holders. | Incorrect accessory; holder position. | Ensure you are using Elicto ES-800 compatible accessories. Adjust the height or orientation of the accessory holders if possible. |
Specifications
- Model: ES-800CS
- Dimensions (L x W x H): 12" x 11" x 46" (approximately)
- Color: Silver
- Compatibility: Elicto ES-800 Cordless 5-in-1 Vacuum Spin Mop Cleaner
- Special Feature: Compact, Freestanding, Charging Dock, Accessory Organizer
Warranty and Support
For warranty information, technical support, or to purchase replacement parts, please visit the official Elicto website or contact Elicto customer service. Keep your purchase receipt as proof of purchase.
About the Elicto ES-800 Cordless 5-in-1 Vacuum Spin Mop Cleaner
The Elicto ES-800 Vacuum Stand is designed to perfectly complement the Elicto ES-800 Cordless 5-in-1 Vacuum Spin Mop Cleaner. This versatile cleaning device offers powerful suction and multiple functions to keep your home spotless. It features a 100,000 RPM brushless motor, 140 Air Watts of suction power, and a 0.3 Micron Air Purifier Grade Precision Filtration System. With attachments like the Soft Lint Roller Brush, Carbon Fiber Roller Brush, Dual Wet/Dry Spin Mop, Electric Mattress Vacuum with UV light, Crevice Cleaning Vacuum Head, and Crevice Soft Bristle Dual-Use Vacuum Head, it tackles various cleaning tasks from carpets to hard floors, and even mattresses.
Video: An overview of the Elicto 5-in-1 Vacuum Spin Mop, demonstrating its features and various attachments. This video helps illustrate the product for which the stand is designed.
Image: The Elicto ES-800 Cordless Vacuum with its various attachments, neatly organized on the Elicto ES-800 Vacuum Stand.