Good Smile FiguZero 1/6 Nobara Kugisaki Action Figure Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, posing, and care of your Good Smile FiguZero 1/6 Nobara Kugisaki action figure from the Jujutsu Kaisen series. Please read thoroughly before handling the product to ensure proper use and longevity.

Safety Information

WARNING: CHOKING HAZARD - Small Parts. This product contains small parts and is not suitable for children under 3 years of age. This collectible figure is intended for individuals aged 15 and above. Keep all packaging materials away from children. Adult supervision is recommended during assembly and posing to prevent accidental damage or injury.

Package Contents

Carefully unpack the box and ensure all components are present. The FiguZero 1/6 Nobara Kugisaki figure includes the following:

• FiguZero 1/6 Nobara Kugisaki Figure (main body with fabric uniform)
• Interchangeable Facial Expression Parts (3 types: regular, angry, smiling)
• Interchangeable Hair Parts (2 types: normal, altered)
• Interchangeable Wrist Parts (6 pieces: 1 pair hip posture, 1 pair holding hands, thumb up, right hand for holding nails, right hand for holding straw doll, right hand for holding hammer)
• Waist Bag
• Metal Hook
• Nails (3 pieces)
• Nail Effect Parts
• Straw Doll
• Picot Hammer

This image displays the FiguZero 1/6 Nobara Kugisaki figure in her full uniform, alongside all her interchangeable parts and accessories. These include three facial expressions, two hair styles, multiple hand gestures, a waist bag, metal hook, three nails, nail effect parts, a straw doll, and a picot hammer.

Assembly and Setup

The FiguZero 1/6 Nobara Kugisaki figure features various interchangeable parts for customization. Follow these steps for assembly:

1. Changing Facial Expressions and Hair: Gently remove the current facial expression or hair part from the head. Carefully align the desired new part with the pegs on the head and press firmly until it clicks into place. Avoid twisting or forcing the parts.
2. Changing Wrist Parts: To replace wrist parts, gently pull the existing hand from the wrist joint. Select the desired new hand and carefully push it onto the wrist joint peg until it is securely attached.
3. Attaching Accessories: The waist bag, metal hook, nails, nail effect parts, straw doll, and picot hammer can be held by the appropriate interchangeable hand parts or positioned as desired. Ensure a secure fit to prevent items from falling.
4. Fabric Clothing: The figure comes dressed in a detailed fabric uniform. Handle the clothing gently to avoid snags or tears.

Operating and Posing

This figure boasts over 32 points of articulation, allowing for a wide range of dynamic poses. To pose your figure:

• Joint Manipulation: Carefully manipulate the joints at the neck, shoulders, elbows, wrists, torso, hips, knees, and ankles to achieve desired stances.
• Gentle Force: Always apply gentle, even pressure when moving joints. Avoid excessive force or sudden movements, as this can cause breakage or damage to the figure.
• Balance: When posing, ensure the figure is properly balanced to prevent it from falling. A display stand (not included unless specified) may be used for more complex or dynamic poses.

Maintenance

Proper maintenance will help preserve the quality and appearance of your figure:

• Cleaning: To clean your figure, gently wipe it with a soft, dry, lint-free cloth. For stubborn dust, a soft brush can be used. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the paint or materials.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity. Prolonged exposure to these conditions can cause discoloration, material degradation, or warping. Keep all small parts in a safe, designated container when not in use to prevent loss.
• Handling: Always handle the figure by its main body parts, avoiding delicate accessories or thin extremities.

Troubleshooting

If you encounter any issues with your figure, consider the following:

• Stiff Joints: If a joint feels stiff, gently warm the area with a hairdryer on a low setting for a few seconds. This can make the plastic more pliable and easier to move. Exercise caution to avoid overheating.
• Loose Joints: For slightly loose joints, a very small amount of clear nail polish or a similar non-permanent adhesive can be applied to the joint peg and allowed to dry partially before reattaching. Use sparingly and test on an inconspicuous area first.
• Parts Not Fitting: Ensure that you are using the correct interchangeable parts and that they are aligned properly before attempting to attach them. Do not force parts together.

Specifications

Warranty and Support

For warranty information or customer support regarding your Good Smile FiguZero 1/6 Nobara Kugisaki action figure, please contact your original retailer or the manufacturer, Good Smile Company, directly. Retain your proof of purchase for any warranty claims or inquiries.