Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your Craig Frames 76039 picture frame. This contemporary frame features clean lines and a laminate wrap finish, designed to display your 13 x 19 inch photos or prints.
Image: Two Craig Frames 76039 picture frames in contemporary red, sized 13x19 inches. The frames feature a smooth laminate finish and are designed for displaying photos or prints.
Package Contents
Verify that all components are present before proceeding with assembly and setup:
- Craig Frames 76039 Picture Frame (Quantity: 2)
- Acrylic Facing (pre-installed)
- Cardboard Backing (pre-installed)
- Hanging Kit (assembly required)
Setup and Photo Insertion
Follow these steps to insert your photo or print into the frame and prepare it for hanging:
- Prepare the Frame: Carefully place the frame face down on a clean, soft surface to prevent scratching the acrylic or frame finish.
- Remove Backing: Locate the flexible metal tabs on the back of the frame. Gently bend these tabs upwards to release the cardboard backing and the acrylic facing. Remove both.
- Remove Protective Film: The acrylic facing may have protective film on both sides. Peel off this film before inserting your artwork to ensure maximum clarity.
- Insert Artwork: Place your 13 x 19 inch photo or print onto the cardboard backing. Ensure it is centered and aligned as desired. Note that the frame lip will cover approximately 0.25 inches on each side of your artwork.
- Reassemble: Place the cleaned acrylic facing over your artwork, followed by the cardboard backing. Ensure all layers are flush.
- Secure Backing: Bend the flexible metal tabs back down to firmly hold the cardboard backing and artwork in place.
- Attach Hanging Hardware: The included hanging kit requires assembly. Follow the instructions provided with the kit to attach the hanging hardware to the back of the frame. The frame is designed for wall hanging only and supports both portrait and landscape orientations.
Operating Instructions (Hanging)
Once your photo is securely in the frame and the hanging hardware is attached, you can proceed with mounting the frame on a wall:
- Select Location: Choose a suitable wall location for your frame.
- Determine Orientation: Decide whether you will hang the frame in portrait (vertical) or landscape (horizontal) orientation. The hanging hardware allows for both.
- Install Wall Fastener: Use appropriate wall fasteners (e.g., picture hanging hooks, nails, screws) suitable for your wall type and the weight of the frame. Ensure the fastener is level and securely installed.
- Hang Frame: Carefully lift the frame and position the attached hanging wire or hook onto the wall fastener. Ensure the frame is stable and level.
Important: This frame is designed exclusively for wall hanging. Do not attempt to use it as a tabletop frame without additional support, as it lacks a built-in easel stand.
Maintenance and Care
Proper care will help maintain the appearance and longevity of your picture frame:
- Cleaning the Frame: Wipe the frame moulding with a soft, dry, lint-free cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the laminate finish.
- Cleaning the Acrylic: For the acrylic facing, use a soft, damp cloth with mild soap and water, or a specialized acrylic cleaner. Do not use glass cleaners containing ammonia, as they can cloud or damage acrylic. Gently wipe and then dry with a clean, soft cloth.
- Dusting: Regularly dust the frame and acrylic with a soft, dry cloth or a feather duster.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of your artwork and potential discoloration of the frame. Position frames in areas with indirect light.
- Humidity Control: Avoid placing frames in areas with extreme temperature fluctuations or high humidity, which can affect the frame materials and artwork.
Troubleshooting
Here are solutions to common issues you might encounter:
| Issue | Solution |
|---|---|
| Artwork appears blurry or scratched | Ensure the protective film has been removed from both sides of the acrylic facing. Clean the acrylic as per maintenance instructions. |
| Frame hangs unevenly | Verify that the wall fastener is level and securely installed. Adjust the hanging wire or hook on the frame if necessary. |
| Artwork slips inside the frame | Ensure the flexible metal tabs on the back are bent down firmly to secure the cardboard backing and artwork. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Craig Frames |
| Model Number | 76039 |
| Size | 13 x 19 inches (artwork size) |
| Color | Contemporary Red |
| Frame Material | MDF Wood Composite |
| Finish Type | Laminate Wrap |
| Moulding Width | 2 inches |
| Cover Material | Acrylic |
| Mounting Type | Wall Mount Only |
| Orientation | Horizontal, Vertical |
| Product Dimensions | 22.5 x 16.5 x 1 inches (overall frame dimensions) |
| Item Weight | 6 pounds (for the set of 2) |
| Number of Items | 2 |
Warranty and Support
For specific warranty information or product support, please refer to the documentation included with your purchase or contact Craig Frames directly through their official website or customer service channels. General return policies may apply as per the retailer's terms.
Manufacturer: Craig Frames Inc.
For further assistance, visit the Craig Frames Store on Amazon.