1. Safety Information
Read all instructions before installation and use. Failure to follow these instructions may result in injury or product damage. Keep this manual for future reference.
- Ensure proper electrical grounding according to local codes.
- Do not operate the tub without sufficient water level to cover jets.
- Avoid using abrasive cleaners or tools that may damage the acrylic surface.
- Always test water temperature before entering the tub to prevent scalding.
- Children and individuals with health conditions should be supervised or consult a physician before use.
2. Product Overview
The ANZZI 2753FLWL Walk-In Bathtub is designed for comfort and therapeutic bathing. It features a durable acrylic construction, a low-threshold entry, and a range of massage and lighting options.
Key Features:
- Dual system with 10 whirlpool jets and 18 air jets.
- Quick Fill faucet with a 6-setting handheld shower.
- Inline heater for consistent water temperature.
- Built-in grab bars and ADA-compliant seat for safety.
- Chromatherapy lighting and aromatherapy system.
- Low threshold and slip-resistant floor.
Components:
3. Setup
Professional installation is recommended for this walk-in bathtub. Ensure all plumbing and electrical connections comply with local building codes.
Installation Considerations:
- Location: Verify the tub dimensions (52.5"L x 26.5"W x 44.5"H) fit your bathroom space. An extension kit is included for standard 60" tub spaces.
- Drainage: This model features a left-drain configuration. Confirm compatibility with existing plumbing.
- Electrical: Requires 110V power with 2x20 amp GFCI breakers for safe operation of jets, heater, and lighting.
- Water Supply: Connect hot and cold water lines to the quick-fill faucet.
Door Operation:
The tub door opens and closes with a latch mechanism. Ensure the door is securely latched before filling the tub to prevent leaks.
4. Operating Instructions
Familiarize yourself with the control panel and various functions before first use.
Control Panel:
The digital control pad manages hydro/air massage jets, bathing chroma lights, and the inline maintenance heater.
Filling the Tub:
- Ensure the tub door is securely closed and latched.
- Use the quick-fill faucet to fill the tub to the desired level.
- Adjust water temperature using the hot/cold water mixer. The inline heater will help maintain this temperature during your soak.
Massage Functions:
- Whirlpool Jets: Activate the 10 whirlpool jets via the control panel for deep tissue massage. Adjust intensity with the jet intensity valve.
- Air Jets: Activate the 18 air jets via the control panel for a gentle aero-massage.
Lighting and Aromatherapy:
- Chromatherapy: Use the control panel to select desired LED light colors for a color-enhanced bathing experience.
- Aromatherapy: Add essential oils or bath salts to the designated aromatherapy dispenser (if applicable) to infuse the bath with scent.
Handheld Shower:
The handheld shower offers 6 spray settings and a 60-inch reach for targeted rinsing or assisted bathing.
5. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your ANZZI Walk-In Bathtub.
- Cleaning: Use a soft cloth and non-abrasive, mild bathroom cleaner. Avoid harsh chemicals or scouring pads that can scratch the acrylic surface.
- Jet Cleaning: Periodically run the jets with a tub cleaner solution to prevent buildup.
- Drain Maintenance: Regularly check and clean the drain assembly to ensure proper water flow.
- Door Seal: Inspect the door seal for any signs of wear or damage. A damaged seal can lead to leaks.
6. Troubleshooting
This section addresses common issues you might encounter with your walk-in bathtub.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to control panel/jets/heater | GFCI breaker tripped, loose electrical connection, power outage. | Check and reset GFCI breakers. Ensure power cords are securely plugged in. Verify power supply. If issues persist, contact a qualified electrician. |
| Water leaks from door seal | Door not fully latched, debris on seal, damaged seal. | Ensure door is securely latched. Clean any debris from the door seal. If the seal is damaged, contact customer support for replacement. |
| Jets not working or weak flow | Insufficient water level, air intake blocked, pump issue. | Ensure water level covers all jets. Check for obstructions in air intake. If the pump is not operating, refer to electrical troubleshooting or contact support. |
| Water temperature not consistent | Inline heater malfunction, water supply issues. | Verify the inline heater is active via the control panel. Check hot water supply. If the heater is faulty, contact customer support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 2753FLWL |
| Dimensions (L x W x H) | 52.5" x 26.5" x 44.5" |
| Material | Acrylic with fiberglass reinforcement |
| Color | Left Door White |
| Installation Type | Freestanding |
| Capacity | 93.79 Gallons |
| Item Weight | 180 Pounds |
| Voltage | 110V |
| Rated Power | 2770W |
| Electrical Connection | 2x20 amp GFCI breakers |
| Whirlpool Jets | 10 |
| Air Jets | 18 |
| Included Components | Drain Assembly, Grab Bars, Handheld Shower Sprayer, Quick Fill Faucet, Heater |
8. Warranty & Support
ANZZI products are designed for quality and durability. For specific warranty details, please refer to the documentation included with your purchase or contact ANZZI customer support directly.
Customer Support:
For assistance with installation, operation, maintenance, or troubleshooting, please contact ANZZI customer support. They offer responsive support to address any concerns.
- Returns: This product typically includes a 30-day easy return policy. Please check your purchase details for specifics.
