VLAND LED Headlights User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your new VLAND LED Headlights. These headlights are designed as a direct replacement for specific Lexus RX models, enhancing both functionality and aesthetic appeal with advanced LED technology, including sequential turn signals and blue breathing lighting.

Image: VLAND LED Headlights, showcasing the amber reflector and blue breathing lighting features, designed for Lexus RX series vehicles.

2. Vehicle Compatibility

These VLAND LED Headlights are compatible with the following vehicles:

• 2013-2015 Lexus RX270
• 2013-2015 Lexus RX300
• 2014-2015 Lexus RX350 (Non-AFS Headlight Models)

Important Note: These headlights are NOT compatible with 2013 Lexus RX350 models or F Sport models. They are also not compatible with vehicles equipped with AFS (Adaptive Front-lighting System) functionality. If your vehicle has AFS, the AFS function will be lost, and a dashboard alarm may appear.

3. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

• 1 set of Headlights (Driver side & Passenger side)
• 1 Harness pack (includes two versions of adapters for 'Made in Canada' or 'Made in Japan' vehicles)
• 1 User Manual (this document)

Image: Illustration of the VLAND headlight packaging and included components, emphasizing the thorough testing and LED display features.

4. Installation and Setup

Installation of the VLAND LED Headlights is designed for direct OE fitment, utilizing the same connections and wires as the original factory units. Professional installation is recommended if you lack experience with automotive electrical systems.

4.1 Pre-Installation Checks

• Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation.
• Identify your vehicle's origin ('Made in Canada' or 'Made in Japan') to select the correct adapter harness from the included pack.
• Familiarize yourself with the existing headlight assembly and its mounting points.

4.2 Installation Steps

1. Carefully remove the original headlight assemblies from your vehicle. Refer to your vehicle's service manual for specific removal procedures.
2. Connect the main plug of the new VLAND headlight assembly to the vehicle's wiring harness. Ensure a secure connection.
3. Connect the ACC (Accessory) plug to a fuse hole in the fuse box to enable the DRL (Daytime Running Light) function.
4. (Optional) To disable the blue startup animation, disconnect the dedicated plug for the blue light.
5. Mount the new VLAND headlight assemblies into position, ensuring they are securely fastened.
6. Reconnect the vehicle's battery.
7. Test all lighting functions: low beam, high beam, DRL, and turn signals.

Image: Rear view of the VLAND headlight assembly, illustrating the main plug, ACC plug for DRL, optional blue light disconnect, and adjustment screws for light alignment.

4.3 Headlight Adjustment

After installation, it is crucial to adjust the headlight beam pattern for optimal visibility and to avoid blinding oncoming traffic. Use the adjusting screws located on the back of the headlight assembly:

• Left/Right Adjusting Screw: For horizontal beam alignment.
• Up/Down Adjusting Screw: For vertical beam alignment.

Perform adjustments on a level surface, facing a wall at a recommended distance (refer to local regulations or automotive guidelines for precise distances and target heights).

5. Operating Features

Your VLAND LED Headlights incorporate several advanced lighting features:

• LED DRL with Blue Breathing: The Daytime Running Lights feature a distinctive blue breathing effect upon engine start-up, transitioning to white for normal operation. This provides a modern and elegant appearance.
• High Beam & Low Beam: Integrated LED projectors provide powerful and clear illumination for both high and low beam functions.
• Sequential Turn Signal: The amber turn signals illuminate in a dynamic, sequential pattern, enhancing visibility and signaling intent more clearly.

Image: Visual representation of the VLAND headlight's various lighting modes: DRL, LED Low Beam, Blue Breathing Lighting, LED High Beam, and Sequential Turn Signal.

Image: Demonstration of the sequential turn signal indicator, showing the progressive illumination of the amber light bar.

Image: Illustration of the dynamic animation light feature, showing the blue startup animation sequence.

6. Care and Maintenance

VLAND LED Headlights are designed for durability and minimal maintenance. They feature an IP67 waterproof rating, and are dust-proof and shock-proof, ensuring reliable performance in various conditions.

• Cleaning: Clean the lens with a soft cloth and mild automotive cleaning solution. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate lens material.
• Inspection: Periodically inspect the headlight assemblies for any signs of damage, loose connections, or condensation.
• Bulb Replacement: These headlights feature full LED illumination and do not require traditional bulb replacements. If an LED component fails, the entire assembly may need servicing or replacement.

Image: Visual representation highlighting the waterproof (IP67), dust-proof, and shock-proof characteristics of the VLAND headlights.

7. Troubleshooting

This section addresses common issues you might encounter:

8. Product Specifications

9. Warranty and Support

9.1 Warranty Policy

VLAND products found to be defective are covered for a period of One Year following the original purchase date. This warranty covers manufacturing defects under normal use.

9.2 Customer Support

For any questions, concerns, or issues regarding your VLAND LED Headlights, please contact VLAND customer support. When contacting support, please be prepared to provide:

• Your product label
• Video and picture proof clearly showing the defect (if applicable)
• Details of your car model

It is recommended to keep all original boxes, labels, and this user manual for warranty and support purposes.

10. Official Product Videos

No official product videos from the seller were provided for this specific product at this time.