1. Introduction and Overview
The LG SQ-G2ST65 OLED G2 Series Stand and Back Cover is an essential accessory designed to provide a stable and aesthetically pleasing tabletop mounting solution for compatible LG OLED G2 series televisions. This stand allows you to place your television on a flat surface, offering an alternative to wall mounting while maintaining a sleek appearance. It is specifically compatible with the LG OLED65G2PUA model.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Ensure all components are securely fastened before placing the television on the stand. Loose connections can lead to instability and potential damage or injury.
- Do not exceed the maximum weight capacity of the stand. Refer to your television's specifications for its weight.
- Keep small parts, such as screws, out of reach of children to prevent choking hazards.
- Always assemble the stand on a soft, clean surface to prevent scratches to the stand or your television.
- If you are unsure about any step, consult a qualified technician or LG customer support.
3. Package Contents
Verify that all the following components are included in your package:
- LG SQ-G2ST65 Stand Base (Metal)
- Stand Support Structure (Plastic, grid-like)
- Back Covers (Multiple pieces for cable management and aesthetics)
- Assorted Screws for assembly
- Instruction Manual (This document)
4. Setup and Installation
Follow these steps carefully to assemble and install your LG SQ-G2ST65 stand. It is recommended to have two people for the installation of the stand to the television.
Step 4.1: Prepare the Stand Components
Unpack all components and lay them out on a soft, flat surface to prevent scratches. Identify the metal stand base and the plastic support structure.
Figure 4.1: Overview of the stand components, including the metal base and the plastic support.
Step 4.2: Assemble the Stand Base
Attach the plastic support structure to the metal stand base using the provided screws. Ensure the grid-like side of the plastic support faces upwards, as this will connect to the television. Tighten all screws firmly but do not overtighten.
Figure 4.2: Underside view of the stand, illustrating the connection points between the metal base and the plastic support.
Step 4.3: Attach Stand to Television
Carefully lay your LG OLED G2 television face down on a soft, clean, and stable surface. Align the assembled stand with the mounting holes on the back of the television. Secure the stand to the television using the appropriate screws provided. Ensure all screws are fully tightened to prevent wobbling.
Figure 4.3: Rear view of the stand, highlighting the screw holes for securing it to the television.
Step 4.4: Install Back Covers
Once the stand is securely attached to the television, install the provided back covers. These covers snap into place over the mounting area and cable routing channels, providing a clean and finished look. They also assist in cable management.
Figure 4.4: Top view of the stand with the back covers in place, demonstrating the integrated cable management and aesthetic design.
Step 4.5: Final Placement
With the stand fully assembled and attached to the television, carefully lift the television and place it on your desired flat, level, and sturdy surface. Ensure there is adequate ventilation around the television.
Figure 4.5: Side view of the stand, illustrating its fixed 4-degree backward tilt for optimal viewing.
5. Operating Instructions
The LG SQ-G2ST65 stand is a passive accessory designed to support your television. Once properly installed, no further "operation" is required.
- Stable Placement: Always ensure the television and stand are placed on a flat, level, and sturdy surface to prevent tipping.
- Fixed Tilt: The stand is designed with a fixed 4-degree backward tilt. This angle is intentional to provide an optimal viewing experience in typical room setups. It is not adjustable.
- Cable Management: Utilize the integrated back covers and channels to route and organize your television's cables for a neat appearance and to prevent strain on connections.
6. Maintenance
Proper maintenance will ensure the longevity and appearance of your stand.
- Cleaning: Use a soft, dry cloth to wipe down the stand. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying with a clean, dry cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
- Screw Check: Periodically (e.g., every 6-12 months) check all screws and connections to ensure they remain tight. Vibrations or movement can sometimes loosen fasteners over time.
- Relocation: If relocating the television and stand, always lift the unit carefully with at least two people. Avoid dragging the stand, as this can damage the stand or the surface it is on.
7. Troubleshooting
If you encounter any issues with your stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand feels unstable or wobbly. | Screws are not fully tightened. Stand is not on a level surface. Incorrect television model. | Ensure all assembly screws are tightened firmly. Move the television and stand to a flat, level surface. Verify your television model is compatible with SQ-G2ST65 (e.g., OLED65G2PUA). |
| Television appears to tilt backward. | This is the intended design. | The LG SQ-G2ST65 stand is designed with a fixed 4-degree backward tilt for optimal viewing angles. This is not an adjustable feature. |
| Cannot attach back covers. | Not aligned correctly. Obstruction. | Ensure the back covers are oriented correctly and align with the snap-in points. Check for any cables or debris obstructing the fit. |
8. Specifications
- Model Number: SQ-G2ST65
- Compatible TV Models: LG OLED G2 Series (e.g., OLED65G2PUA)
- Product Dimensions (WxHxD): Approximately 12.72 x 30.83 x 12.68 inches (32.3 x 78.3 x 32.2 cm)
- Item Weight: Approximately 14.02 pounds (6.36 kg)
- Color: Black
- Manufacturer: LG
- First Available Date: May 5, 2022
9. Warranty and Support
Warranty Information
This LG SQ-G2ST65 stand comes with a 1 Year Limited Replacement Warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or visit the official LG website.
Customer Support
For further assistance, technical support, or warranty claims, please contact LG Customer Support. You can find contact information, FAQs, and additional resources on the official LG website.
