1. Important Safety Instructions
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician to prevent electric shock or injury.
- Do not attempt to modify the mirror or its components.
- Avoid using abrasive cleaners or sharp objects on the mirror surface.
- This mirror is designed for indoor use only in bathroom environments.
- Keep children away from the mirror during operation and cleaning.
2. Product Overview
The Wisfor LED Bathroom Wall Mirror (Model XMR-C18-812-L) is a 28 x 20 inch dimmable, backlit smart mirror designed to enhance your bathroom experience. It features an anti-fog function, adjustable lighting, and memory settings for convenience.
Figure 2.1: Wisfor LED Bathroom Wall Mirror with warm backlighting in a modern bathroom setting.
Figure 2.2: Two Wisfor LED Bathroom Wall Mirrors installed above a dual vanity setup.
Key Features:
- Dimmable Backlighting: Features a double-patterned frosted design for enhanced light transmission. LED strips (2835 lamp beads, 120LED/m) provide 5796lm with CRI≥90 and a lifespan of up to 50,000 hours.
- Adjustable Color Temperature: Easily switch between warm (3500K), natural (4000K), and white (6500K) light.
- Anti-Fog Function: Independent defogger with a demisting area of 200x300mm, heating to 45°C in 5 minutes.
- Memory Function: Restores the last used lighting status when controlled by a wall switch.
- High-Fidelity Mirror: 5mm copper-free silver-plated mirror with 95-97% fidelity for distortion-free HD imaging.
- Durable and Safe: Made with explosion-proof glass and UL certified electrical components. IP65 waterproof rating.
Figure 2.3: Visual representation of the mirror's integrated smart functions.
Figure 2.4: The Wisfor LED mirror integrated into a vanity setup.
3. Installation Guide
This mirror is designed for wall-mounted installation and can be hung either horizontally or vertically. Ensure you have the necessary tools and follow local electrical codes.
3.1 Tools Required (Not Included):
- Drill
- Measuring Tape
- Pencil
- Screwdriver
- Wire Strippers
- Safety Glasses
3.2 Installation Steps:
- Prepare the Wall: Choose a suitable location on the wall. Use a level to mark the desired height and position for the mirror. The mirror has eight plum blossom holes to support horizontal or vertical hanging.
- Drill Holes: Based on the mirror's mounting points, drill appropriate holes in the wall. Insert wall anchors if necessary.
- Mount the Mirror: Secure the mirror to the wall using the provided screws. Ensure it is firmly attached and level.
- Electrical Connection:
- Turn off the main power supply at the circuit breaker.
- Connect the mirror's electrical wires to your home's wiring. The mirror is designed for hardwired installation and can be controlled by a wall switch.
- Ensure all connections are secure and insulated. The mirror's power cable is 0.8m long, allowing for hidden wiring.
- The mirror operates at 110V with a power consumption of 24W and an output current of 0-2A.
- Restore Power: Once all connections are secure and the mirror is mounted, restore power at the circuit breaker.
Figure 3.1: Installation diagram showing wall mounting and wiring options.
Video 3.1: This video demonstrates the installation process, including wall mounting and electrical connections, as well as key features like dimming and anti-fog.
4. Operating Instructions
The mirror features intuitive touch controls for various functions.
4.1 Touch Controls:
- Power Button (Rightmost): Short press to turn the mirror lights ON/OFF.
- Color Temperature Button (Middle): Short press to cycle through warm (3500K), natural (4000K), and white (6500K) light colors.
- Dimming Button (Leftmost): Long press to steplessly adjust the brightness of the mirror lights.
- Anti-Fog Button (Integrated with Power or separate, refer to specific model): The defogger can be controlled independently. Short press to activate/deactivate the anti-fog function.
Figure 4.1: Touch controls for adjusting light color and brightness.
4.2 Wall Switch Control & Memory:
If hardwired to a wall switch, the mirror will automatically restore the last used lighting status (brightness and color temperature) when the wall switch is turned ON. The defogger can be operated independently of the lights.
Figure 4.2: The anti-fog function ensures a clear reflection even in steamy conditions.
5. Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your Wisfor LED Bathroom Wall Mirror.
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping into the electrical components.
- Cleaning the Frame: Wipe the frame with a soft, damp cloth. Avoid harsh chemicals.
- Electrical Components: Do not attempt to clean or service internal electrical components. If any electronic accessories are broken, they can be replaced by following the repair instructions (if provided separately) or by contacting customer support.
- Inspection: Periodically check for any loose connections or damage to the mirror or wiring.
6. Troubleshooting
If you encounter any issues with your mirror, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Ensure all electrical connections are secure. Test the wall switch. |
| Anti-fog function not working. | Defogger not activated; power issue. | Ensure the anti-fog button is pressed. Check power supply to the mirror. |
| Lights are flickering or dim. | Unstable power supply; loose connection; LED strip issue. | Verify stable power. Check wiring. Contact customer support if problem persists. |
| Touch controls are unresponsive. | Temporary software glitch; moisture on sensor. | Turn off power for 1 minute and restart. Ensure touch area is dry and clean. |
If the problem persists after attempting these solutions, please contact Wisfor customer support for further assistance.
7. Specifications
- Brand: Wisfor
- Model Number: XMR-C18-812-L
- Dimensions: 28" x 20" (Rectangular)
- Material: 5mm Copper-free Silver-plated Glass, Aluminum Frame
- Light Source: LED (2835 lamp beads, 120LED/m)
- Lumen Output: 5796lm
- Color Rendering Index (CRI): ≥90
- Color Temperature: 3500K (Warm), 4000K (Natural), 6500K (White)
- Lifespan: Up to 50,000 hours
- Power: 24W
- Voltage: 110V
- Output Current: 0-2A
- Waterproof Rating: IP65
- Special Features: Dimmable, Backlit, Anti-Fog, Smart Touch Controls, Brightness Memory, Wall Switch Control, Explosion-proof Glass.
- Mounting Type: Wall Mount (Horizontal or Vertical)
- Item Weight: 7.55 kg
- Parcel Dimensions: 85.09 x 62.48 x 11.68 cm
8. Warranty and Support
Wisfor products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official Wisfor website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Wisfor customer service through the contact information provided in your product packaging or on the official Wisfor website.
Manufacturer: Wisfor
Date First Available: July 16, 2022