Troy Lighting F1218-BI Enzo Pendant Light User Manual

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Troy Lighting F1218-BI Enzo 1-Light Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Enzo pendant light features a contemporary design with two laser-cut, leaf-like shapes in a black finish, intertwining to hold an egg-shaped opal glass shade. This fixture is designed to provide bright, ambient lighting.

2. Safety Information

• WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• This fixture is intended for indoor use only. Do not expose to water or moisture.
• Use only the specified bulb type and wattage. Exceeding the maximum wattage may cause overheating and damage to the fixture.
• Handle glass components with care to prevent breakage.
• Ensure the fixture is securely mounted to a structural element of the ceiling.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. What's Included

Carefully unpack your new fixture and lay out all parts on a clear area. Ensure all components listed below are present before discarding packaging materials.

• Pendant Light Fixture (Model F1218-BI)
• Opal Glass Shade
• Mounting Hardware
• Installation Instructions (this manual)

Image of the Troy Lighting F1218-BI Enzo pendant light, featuring a black finish frame with a white glass globe shade suspended within.

4. Setup and Installation

Important: Before starting installation, ensure the power supply to the circuit is turned off at the main fuse box or circuit breaker.

1. Prepare the Mounting Surface: Ensure the junction box is securely mounted to the ceiling structure and can support the weight of the fixture (27 lbs).
2. Attach Mounting Plate: Secure the mounting plate (included in hardware) to the junction box using the provided screws.
3. Adjust Chain Length: Determine the desired hanging height for your pendant. Adjust the chain length by removing links as necessary. Feed the electrical wires through the chain and canopy.
4. Make Electrical Connections:
   • Connect the fixture's bare copper or green ground wire to the green or bare copper ground wire from the junction box.
   • Connect the fixture's ribbed or white wire to the white (neutral) wire from the junction box.
   • Connect the fixture's smooth or black wire to the black (hot) wire from the junction box.
   Secure all connections with wire nuts and wrap with electrical tape.
5. Secure Canopy: Tuck all wires neatly into the junction box. Raise the canopy to the ceiling and secure it to the mounting plate using the provided screws.
6. Install Glass Shade: Carefully attach the opal glass shade to the fixture according to the specific design. Ensure it is seated firmly.
7. Install Bulb: Insert one incandescent bulb (max 100 watts) into the socket. Do not exceed the recommended wattage.
8. Restore Power: Once installation is complete, restore power at the circuit breaker.

5. Operating Instructions

The Troy Lighting F1218-BI Enzo pendant light is designed for simple operation.

• Turning On/Off: This fixture is controlled by a standard wall switch connected to the circuit. Flip the switch to turn the light on or off.
• Bulb Replacement:
  1. Turn off power to the fixture at the circuit breaker.
  2. Allow the bulb to cool completely if it has been recently in use.
  3. Carefully remove the glass shade if necessary to access the bulb.
  4. Unscrew the old bulb counter-clockwise.
  5. Screw in a new incandescent bulb (max 100 watts) clockwise until snug.
  6. Reattach the glass shade securely.
  7. Restore power at the circuit breaker.
• Control Method: The product specifications mention "App" as a control method. This typically implies compatibility with smart home systems or smart bulbs that can be controlled via an app, not that the fixture itself has built-in app control. If using smart bulbs, follow the bulb manufacturer's instructions for app integration.

6. Maintenance and Care

• Cleaning:
  • Always disconnect power before cleaning.
  • For the metal frame, wipe with a soft, dry cloth. Do not use abrasive cleaners or polishes as they may damage the finish.
  • For the glass shade, wipe with a soft, damp cloth. A mild glass cleaner can be used sparingly, applied to the cloth first, not directly to the glass.
• Bulb Type: Use only incandescent bulbs as specified.
• Regular Inspection: Periodically check all connections and mounting hardware for tightness.

7. Troubleshooting

If you experience issues not covered here, or if troubleshooting steps do not resolve the problem, please contact customer support.

8. Specifications

9. Warranty Information

This Troy Lighting fixture is covered by a 1-year limited manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear. For warranty claims, please retain your proof of purchase and contact Troy Lighting customer support.

10. Customer Support

For technical assistance, replacement parts, or warranty inquiries, please contact Troy Lighting customer service.

• Online: Visit the official Troy Lighting website or their store page on Amazon: Troy Lighting Amazon Store
• Please have your model number (F1218-BI) and proof of purchase ready when contacting support.