HAKUTA 500W Light Rain & Splash Proof Fog Machine User Manual

1. Product Overview

The HAKUTA 500W Light Rain & Splash Proof Fog Machine is designed to produce fog effects for various events. It features 8 LED lights with multiple color options and effects, controlled by two wireless remotes. The unit is designed with a light rain and splash-proof exterior for outdoor use in damp conditions.

Image 1.1: HAKUTA 500W Fog Machine in operation, emitting purple fog.

Package Contents:

• HAKUTA 500W Fog Machine
• Wireless Fog Remote Control
• Wireless LED Light Remote Control
• Power Cable
• User Manual (this document)

2. Safety Instructions

• Read all instructions before operating the machine.
• This machine is light rain and splash-proof, but NOT fully waterproof. Do not immerse in water or expose to heavy rain.
• Use only fog liquid specifically designed for fog machines. Do not use flammable liquids.
• Ensure the machine is placed on a stable, level surface.
• Keep a safe distance from the fog output nozzle to avoid burns.
• Do not block ventilation openings.
• Disconnect power before cleaning or servicing.
• Keep out of reach of children.
• Do not connect other devices not included in the package to the fog machine.

3. Setup

1. Unpack the Machine: Carefully remove all components from the packaging.
2. Positioning: Place the fog machine on a flat, stable surface in the desired location. Ensure adequate ventilation around the unit.
3. Fill the Liquid Tank: Unscrew the cap of the liquid tank. Pour appropriate fog liquid into the tank. Ensure the metal nozzle inside the tank is fully immersed in the liquid. Do not overfill. The tank capacity is 300ml (0.079 gallons).
4. Connect Power: Plug the power cable into the machine's power socket and then into a standard AC 90-130V, 50/60Hz electrical outlet.
5. Connect Remote Control Wire (if applicable): If using a wired remote (not included with this model, but for general reference), connect it to the designated port. This model primarily uses wireless remotes.

Image 3.1: Step-by-step guide for initial setup and operation.

4. Operating Instructions

4.1 Powering On and Preheating

1. Turn on the POWER switch located on the back of the machine.
2. Allow the machine to preheat for approximately 2-3 minutes. The indicator light will illuminate when the machine is ready for fog output.

4.2 Fog Output Control

• Use the wireless fog remote control. Press the 'unlock' button (or designated fog button) to emit fog.
• Fog output typically lasts for 20-30 seconds per activation. To continue fogging, press the button again after a brief pause.
• The machine can eject fog up to 2-3 meters (6.56-9.84 feet) with a 2300 CFM output.

4.3 LED Light Control

• Turn on the LED LIGHTING switch on the back of the machine.
• Use the separate wireless LED light remote control to manage the lighting effects.
• Color Options: Choose from 13 colors including red, blue, green, cyan, rose red, yellow, and white.
• Light Effects: Select from various lighting effects such as fade, flash, smooth, and strobe, adjustable at different speeds.
• The fog and LED lights can operate independently, allowing for customized effects.

Image 4.1: Front and back view of the fog machine with remote control functions.

Image 4.2: The fog machine with its LED light remote, illustrating the 13 available colors and light effects.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your fog machine.

• Fluid Tank Cleaning: Periodically empty and rinse the fluid tank with distilled water to prevent residue buildup.
• Nozzle Cleaning: If the fog output becomes weak or inconsistent, clean the nozzle. You can run a small amount of fog machine cleaning solution (not included) through the machine, or carefully clear any blockages with a thin wire (ensure machine is unplugged and cooled).
• Exterior Cleaning: Wipe the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, ensure the tank is empty and clean. Store the machine in a cool, dry place.

6. Troubleshooting

7. Specifications

Image 7.1: Product dimensions and key specifications.

8. Warranty and Support

For warranty information and customer support, please refer to the product packaging or contact HAKUTA customer service directly. You can also visit the official HAKUTA store for more information and product updates.

Visit the HAKUTA Store