WEILAILUX WL-3666

WEILAILUX WL-3666 Outdoor Battery Operated Table Lamp Instruction Manual

Model: WL-3666

1. Introduction

Thank you for purchasing the WEILAILUX WL-3666 Outdoor Battery Operated Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before use and retain them for future reference.

2. Product Overview

The WEILAILUX WL-3666 is a versatile, portable LED table lamp designed for both indoor and outdoor use. Its cordless, rechargeable design, coupled with IP44 waterproofing and touch-dimmable functionality, makes it ideal for various settings including patios, camping, restaurants, and home environments.

Key Features:

  • Portable & Cordless: Enjoy lighting anywhere without the need for power outlets.
  • IP44 Waterproof: Designed to withstand outdoor conditions, including rain.
  • Touch Dimmable: Easily adjust brightness with a simple touch.
  • Rechargeable Battery: Built-in 4000mAh Lithium-ion battery provides 8-16 hours of light.
  • Emergency Power Bank: USB-A port allows charging of mobile devices in emergencies.
  • Durable Construction: Features a plastic PE lampshade and matte powder-coated aluminum alloy lamp body.

3. Package Contents

Please check the box for the following items:

  • 1 x WEILAILUX Cordless Table Lamp
  • 1 x USB-C Cable (DC5V/2A)
  • 1 x User Manual
Diagram showing the WEILAILUX Cordless Table Lamp, USB-C cable, and user manual, along with product dimensions and packaging.

Image: Package contents including the lamp, USB-C cable, and user manual. Product dimensions are 5.9"D x 5.9"W x 9.6"H.

4. Setup

4.1 Initial Charging

  1. Locate the rubber tab on the side of the lamp base.
  2. Gently open the tab to reveal the USB-C charging port.
  3. Connect the provided USB-C cable to the lamp's charging port and a compatible 5V/2A USB power adapter (not included).
  4. Allow 4-6 hours for a full charge. A full charge provides approximately 8-16 hours of operation, depending on brightness settings.
  5. Ensure the rubber tab is securely closed after charging to maintain waterproofing.
Image showing the lamp being charged via USB-C cable, with a phone also connected to the USB-A port, illustrating its power bank function.

Image: The lamp's charging ports (USB-C for charging the lamp, USB-A for power bank function) are shown, with a phone connected for charging.

5. Operating Instructions

5.1 Power On/Off and Brightness Adjustment

  1. To Turn On/Off: Lightly touch the sensor switch located on the lamp base.
  2. To Adjust Brightness (Dimming): While the lamp is on, press and hold the sensor switch. The light will gradually dim or brighten. Release your finger when the desired brightness level is reached.
Image showing a hand touching the dimmable switch on the lamp base, with text indicating short touch for On/Off and long touch for Dim-Bright.

Image: A hand demonstrates the touch-dimmable switch on the lamp base for easy control of light intensity.

5.2 Emergency Power Bank Function

The lamp features a USB-A output port that can be used to charge other devices in an emergency.

  1. Ensure the lamp is sufficiently charged.
  2. Open the rubber tab on the side of the lamp base.
  3. Connect your mobile device or tablet to the USB-A output port using its charging cable.
  4. Close the rubber tab securely after use.

6. Maintenance

6.1 Cleaning

To clean the lamp, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

6.2 Waterproofing Care

While the lamp is IP44 waterproof, ensure the rubber tab covering the charging ports is always securely closed when not in use, especially in wet environments, to prevent water ingress.

7. Troubleshooting

  • Lamp does not turn on:
    • Ensure the battery is charged. Connect the lamp to a power source using the USB-C cable and allow it to charge for 4-6 hours.
    • Verify that the touch sensor is being pressed correctly. A light tap should activate it.
  • Light is too dim or too bright:
    • Press and hold the touch sensor to adjust the brightness to your desired level.
  • Device not charging via USB-A port:
    • Ensure the lamp's battery is sufficiently charged.
    • Check the connection of your device's charging cable to the USB-A port.
  • Water inside the lamp:
    • Immediately turn off the lamp and disconnect it from any power source.
    • Ensure the rubber tab covering the charging ports was securely closed.
    • Contact customer support if the issue persists after drying.

8. Specifications

FeatureDetail
Model NameWL-3661
Item Model NumberWL-3666
Product Dimensions5.9"D x 5.9"W x 9.6"H
Item Weight1.4 Pounds
Power SourceBattery Powered
Battery Type4000 mAh Lithium-ion
Charging Input5V/2A (USB-C)
Light Source TypeLED
Wattage2 watts
Brightness180 Lumen
Color Temperature2700 Kelvin
Control MethodTouch
Water Resistance LevelIP44 Waterproof
MaterialAluminum, LLDPE, Polyethylene

9. Warranty and Support

Your WEILAILUX WL-3666 Table Lamp comes with a 30-day free return policy from the date of purchase. For any questions, suggestions, or support needs regarding our products and services, please contact our customer service team. We are committed to providing high-quality products and ensuring customer satisfaction.

© 2026 WEILAILUX. All rights reserved.