ZAMKOL ZK706 Pro Bluetooth Speaker User Manual

1. Introduction

Thank you for purchasing the ZAMKOL ZK706 Pro Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read it thoroughly before use.

Key Features:

• 50W HD Sound Quality & Powerful Deep Bass
• RGB Lighting Effects with 6 Modes
• Advanced Bluetooth 5.0 Connectivity
• IPX7 Waterproof Rating
• 8000mAh Battery with up to 24 Hours Playtime
• Emergency Power Bank Functionality
• 100W True Wireless Stereo (TWS) Pairing

2. Safety Information

To ensure safe operation and prevent damage, please observe the following precautions:

• Do not disassemble, repair, or modify the speaker.
• Keep the speaker away from extreme temperatures, direct sunlight, and open flames.
• Ensure the charging port cover is securely closed when using the speaker near water to maintain IPX7 waterproof integrity.
• Do not expose the speaker to corrosive liquids.
• Use only the provided or certified charging cable.
• Avoid dropping or subjecting the speaker to strong impacts.

3. Package Contents

Please check the package for the following items:

• ZAMKOL ZK706 Pro Bluetooth Speaker
• USB-C Charging Cable
• User Manual

4. Product Overview

Figure 4.1: Front view of the ZAMKOL ZK706 Pro Bluetooth Speaker, showcasing its cylindrical design and top-mounted RGB light ring.

Controls and Ports:

Figure 4.2: Close-up of the speaker's top control panel, showing touch-sensitive buttons for power, volume, playback, and light modes.

• Power Button: Press and hold to turn on/off.
• Play/Pause Button: Press to play or pause music.
• Volume Up (+): Press to increase volume.
• Volume Down (-): Press to decrease volume.
• Bluetooth Button: Press to enter pairing mode.
• Light Mode Button: Press to cycle through RGB lighting effects.

Figure 4.3: View of the speaker's protected charging and USB output ports, located on the side.

• USB-C Input: For charging the speaker.
• USB-A Output: For using the speaker as a power bank to charge other devices.

5. Setup

5.1 Charging the Speaker

1. Open the protective cover on the side of the speaker.
2. Connect the USB-C charging cable to the speaker's USB-C input port.
3. Connect the other end of the cable to a compatible USB power adapter (not included).
4. The charging indicator light will illuminate. A full charge takes approximately 4 hours.
5. Once fully charged, disconnect the cable and securely close the protective cover.

Figure 5.1: The ZK706 Pro speaker connected via USB-A to charge a smartphone, demonstrating its power bank capability.

5.2 Bluetooth Pairing

1. Ensure the speaker is charged and powered on. The Bluetooth indicator will flash, indicating it's in pairing mode.
2. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
3. Select "ZK706 Pro" from the list of devices.
4. Once connected, the Bluetooth indicator will stop flashing and remain solid. You will hear an audible confirmation.
5. The speaker will automatically reconnect to the last paired device when powered on, if within range.

Figure 5.2: The ZK706 Pro speaker wirelessly connected to a smartphone, ready for audio playback.

5.3 True Wireless Stereo (TWS) Pairing

You can pair two ZK706 Pro speakers together for a 100W stereo surround sound experience.

1. Ensure both ZK706 Pro speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press and hold the Bluetooth button for 3 seconds until you hear a prompt.
3. The two speakers will automatically search and pair with each other. Once paired, you will hear a confirmation sound, and the Bluetooth indicator on the primary speaker will flash slowly, while the secondary speaker's indicator will remain solid.
4. Now, connect your device to the primary speaker via Bluetooth as described in Section 5.2.
5. To disconnect TWS, press and hold the Bluetooth button on either speaker.

Figure 5.3: Two ZK706 Pro speakers positioned for True Wireless Stereo (TWS) playback, enhancing the audio experience.

6. Operating Instructions

6.1 Basic Playback Controls

• Power On/Off: Press and hold the Power button.
• Play/Pause: Press the Play/Pause button.
• Volume Up: Press the '+' button.
• Volume Down: Press the '-' button.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.

6.2 RGB Lighting Effects

Press the Light Mode button to cycle through 6 different lighting effects or turn the lights off.

6.3 Using as a Power Bank

The ZK706 Pro can be used to charge your mobile devices:

1. Open the protective cover on the side of the speaker.
2. Connect your device's charging cable to the USB-A output port on the speaker.
3. Your device will begin charging.
4. Close the protective cover when not in use.

6.4 IPX7 Waterproof Usage

The speaker is IPX7 waterproof, meaning it can be submerged in 1 meter of water for up to 30 minutes. Ensure the charging port cover is completely sealed before exposing the speaker to water.

Figure 6.1: The ZK706 Pro speaker enduring water splashes, highlighting its IPX7 waterproof capability for outdoor and wet environments.

7. Maintenance

7.1 Cleaning

• Wipe the speaker with a soft, damp cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Ensure the speaker is dry before charging.

7.2 Storage

• Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, charge the battery to approximately 50% every 3 months to preserve battery life.

8. Troubleshooting

9. Specifications

10. Warranty and Support

ZAMKOL products come with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting, or warranty claims, please contact ZAMKOL customer service through the retailer where you purchased the product or visit the official ZAMKOL website.

Website: ZAMKOL Official Store