Introduction
Thank you for choosing the EDISHINE RGB Color Changing LED Light Bulb. This manual provides detailed instructions for the safe and efficient use of your new light bulb. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Product Features
- Color Changing Capability: Offers 9 bright and vibrant color options, along with 2700K warm white and 5000K daylight white.
- Dimmable: Adjustable brightness for all color and white light settings.
- Remote Control: Conveniently control power, brightness, colors, and modes from a distance.
- Multiple Modes: Includes Flash, Strobe, Fade, and Smooth modes for dynamic lighting effects.
- Timer Function: Set the bulb to automatically turn off after 1, 2, 4, or 8 hours.
- Memory Function: Retains the last selected color and brightness settings when turned off and on.
- Energy Efficient: 10W LED bulb provides 800 lumens, equivalent to a 60W incandescent bulb.
- Long Lifespan: Designed for over 15,000 hours of operation.
- Standard Base: A19 bulb shape with E26 base, suitable for most standard fixtures.
Image: The EDISHINE RGB Color Changing LED Light Bulb displaying a range of colors, highlighting its versatility.
Package Contents
- EDISHINE RGB Color Changing LED Light Bulb(s)
- Remote Control(s)
- Instruction Manual (this document)
Setup
- Unpack: Carefully remove the light bulb and remote control from the packaging.
- Install Bulb: Screw the EDISHINE LED Light Bulb into a standard E26 light fixture. Ensure the fixture is powered off before installation.
- Power On: Turn on the power to the light fixture. The bulb will illuminate in its last used setting (due to memory function) or a default white light.
- Remote Battery: If the remote control does not respond, check if the battery is correctly inserted or needs replacement.
Image: The EDISHINE LED Light Bulb shown in different indoor settings, demonstrating its compatibility with various fixtures.
Operating Instructions
The EDISHINE LED Light Bulb is controlled using the included remote. Ensure the remote is pointed towards the bulb for optimal response.
Image: A detailed diagram of the remote control, illustrating each button's function for operating the light bulb.
Remote Control Functions:
- Power On/Off: Press the ON/OFF button to turn the bulb on or off.
- Brightness Adjustment: Use the Increase Brightness and Reduce Brightness buttons to adjust the light intensity.
- Color Selection: Press any of the fixed preset color buttons (e.g., Red, Green, Blue, Yellow, Purple, Cyan) to change the bulb's color.
- White Light: Press the Lighting Mode (Warm White) button to switch to warm white light. The bulb also supports 5000K daylight white, which may be accessible by cycling through white options or a dedicated button not explicitly shown.
- Dynamic Modes:
- FLASH (0.5 second jump): Rapidly cycles through colors.
- STROBE (3 seconds jump): Cycles through colors with a 3-second interval.
- FADE (color fades away): Smooth transition between colors.
- SMOOTH (color slowly fades away): Gradual and continuous color changes.
- Timer Function: Press the Timer button repeatedly to set an auto-off timer for 1, 2, 4, or 8 hours. Each press cycles through the available timer options.
- Memory Function: The bulb automatically remembers the last color and brightness setting used when it is turned off and then back on.
Maintenance
- Cleaning: Ensure the bulb is cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: If storing the bulb for an extended period, keep it in its original packaging in a cool, dry place.
- Remote Battery: Replace the remote control battery (e.g., CR2025 coin cell) when its range decreases or it stops responding.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, bulb not screwed in properly, bulb is faulty. | Check power switch and circuit breaker. Ensure bulb is securely screwed into the socket. Test bulb in another working fixture. |
| Remote control not working. | Remote battery is dead or incorrectly inserted, remote is too far from the bulb, obstruction between remote and bulb. | Replace remote battery. Ensure remote is within effective range (typically 10-15 feet) and pointed directly at the bulb. Remove any obstructions. |
| Colors are not accurate or consistent. | Interference from other devices, bulb malfunction. | Try resetting the bulb by turning it off and on at the power switch. If the issue persists, contact customer support. |
| Timer function not activating. | Timer not set correctly. | Ensure you press the timer button until the desired duration is indicated. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EDISHINE |
| Model | B09YQWM894 |
| Light Type | Color Changing (RGB) |
| Special Feature | Dimmable, Remote Control, Timer, Memory Function |
| Wattage | 10 Watts |
| Incandescent Equivalent | 60 Watts |
| Bulb Shape Size | A19 |
| Bulb Base | E26 |
| Brightness | 800 Lumens |
| Color Temperature | 2700K (Warm White), 5000K (Daylight White) |
| Voltage | 120 Volts (AC) |
| Average Life | 15,000 Hours |
| Indoor/Outdoor Usage | Outdoor (suitable for damp locations, not direct exposure unless specified by fixture) |
| Certifications | ETL, UL, Energy Star Certified |
Image: Physical dimensions of the EDISHINE LED Light Bulb and its remote control.
Image: An illustration demonstrating the energy efficiency of the 10W EDISHINE LED bulb compared to a traditional 60W incandescent bulb, highlighting its Energy Star certification.
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact EDISHINE customer service directly. Contact details can typically be found on the manufacturer's website or on the product's retail page.
Please visit the official EDISHINE store for more information: EDISHINE Store