Goplus Inflatable Hot Tub Spa User Manual

1. Product Overview

The Goplus Inflatable Hot Tub Spa is designed to provide a relaxing spa experience for 2-4 persons. It features 108 high-powered massage bubble jets, a comfortable heating system, and a circulating water filtration system to ensure clean and enjoyable use. This manual provides detailed instructions for setup, operation, and maintenance.

Figure 1: Goplus Inflatable Hot Tub Spa with external pump unit.

Figure 2: The hot tub comfortably accommodates 2-4 individuals.

2. Package Contents

Before beginning assembly, ensure all components listed below are present and undamaged. Refer to Figure 3 for a visual representation of the package contents and dimensions.

Figure 3: Package contents and product dimensions.

3. Setup Instructions

Follow these steps to set up your Goplus Inflatable Hot Tub Spa. For a visual guide, please refer to the official instruction video below.

1. Preparation: Choose a flat, stable surface for your hot tub. Lay out the ground sheet to protect the tub and reduce heat loss. Unfold the inflatable spa tub on top of the ground sheet.
2. Inflation:
   • Ensure the inner valve of the tub is closed by pressing the button in the center of the valve.
   • Insert the inflatable hose into the air inlet of the tub and rotate it clockwise to secure.
   • Plug the pump unit into a suitable power outlet.
   • Press the bubble button on the control panel to begin inflating the tub. The tub will inflate to its proper shape.
   • Once fully inflated, remove the inflatable hose and securely insert the cap into the valve.
3. Filter Cartridge Installation: Install the filter cartridge into its designated housing inside the tub. Refer to Figure 4 for proper placement.
4. Filling with Water: Fill the hot tub with water using a garden hose. Ensure the water level is between the minimum and maximum waterline indicators marked inside the tub.
5. Connecting the Pump Unit: Connect the two main hoses from the pump unit to the corresponding inlets/outlets on the hot tub. Ensure all connections are tight and the seals are properly in place to prevent leaks.
6. Applying the Cover: Place the dust-proof insulation cover over the hot tub. Secure the cover using the locking buckles around the perimeter of the tub. This helps maintain water temperature and prevents debris from entering.

Figure 4: Water filtration system and flow direction.

Figure 5: Key features including cup holders, headrest, and secure locking buckles.

4. Operating Instructions

The Goplus Hot Tub Spa is operated via the intuitive control panel on the pump unit. Familiarize yourself with the functions to optimize your spa experience.

Figure 6: Control Panel Overview.

• Power On/Off: Press the power button to turn the unit on or off.
• Temperature Adjustment: Use the up and down arrow buttons to set your desired water temperature. The maximum heating temperature is 104°F (40°C). The heating rate is approximately 3.6-5.4°F per hour. To switch between Fahrenheit (°F) and Celsius (°C), press and hold the up and down arrow buttons simultaneously.
• Bubble Function: Press the bubble button to activate the 108 high-powered massage bubble jets. These jets provide a 360° full-body relaxation experience. Press the button again to turn off the bubbles.
• Filter Filtration: The filter button activates the circulating water filtration system, which helps keep the water clean by removing sand, debris, and hair.
• Child Lock: To lock or unlock the control panel, press and hold the up and down arrow keys simultaneously.

Figure 7: The 360° massage bubble jets provide full-body relaxation.

5. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your hot tub.

• Filter Cartridge Replacement: The system will remind you to replace the filter cartridge after 168 hours of use. Regularly check and clean the filter to ensure efficient water circulation and cleanliness.
• Water Draining: Periodically drain the hot tub water for cleaning or storage. Connect the drain hose to the designated drain outlet and allow the water to empty.
• Drying the Tub: After draining, connect the inflatable hose to the air outlet of the pump unit and activate the bubble function for 2-3 minutes. This will help blow out any remaining water from inside the spa pool, preventing mold and mildew.
• Cleaning: Clean the interior and exterior of the tub with mild soap and water. Avoid abrasive cleaners or harsh chemicals.
• Storage: When not in use for extended periods, ensure the tub is completely dry, deflated, and stored in a cool, dry place away from direct sunlight.

6. Troubleshooting

This section addresses common issues you might encounter with your hot tub. For problems not listed here, please contact customer support.

7. Specifications

Detailed technical specifications for the Goplus Inflatable Hot Tub Spa.

Figure 8: Illustration of the premium laminated PVC material's durability.

8. Warranty and Customer Support

For warranty information, technical assistance, or any product-related inquiries, please contact Goplus customer support. Keep your purchase receipt and model number (NP10259US) readily available when contacting support.

You can find contact information for Goplus customer support through their official website or the retailer where the product was purchased.