Spurgehom NYX08-045 3-Panel Rolling Room Divider Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Spurgehom 3-Panel Rolling Room Divider. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product. This room divider is designed to create privacy or divide spaces in various indoor environments such as homes, offices, or studios.

2. Safety Information

Please observe the following safety guidelines to prevent injury or damage to the product:

• Always use caution when handling sharp objects during assembly.
• Ensure the room divider is securely assembled and placed on a stable, level surface to prevent tipping or falling.
• Do not allow children to climb on or play with the room divider.
• Avoid placing the room divider in high-traffic areas where it could be easily knocked over.

3. Package Contents

Before beginning assembly, verify that all components listed below are present:

• Fabric Panels (3)
• Vertical Support Poles (6)
• Horizontal Support Bars (6)
• Base Supports (6)
• Universal Wheels (8, 4 with locking mechanism)
• Connecting Buckles/Joints
• Assembly Hardware (screws, screwdriver)

Figure 1: Overview of all included components for assembly.

4. Assembly Instructions

Assembly typically requires one person and a screwdriver (usually included). Follow these steps carefully:

1. Attach Wheels to Base Supports: Secure the eight universal wheels to the base supports. Ensure that the four wheels with locking mechanisms are distributed evenly for optimal stability.


Figure 2: Detail of an easy-to-install, flexible, and lockable wheel, designed to protect floor surfaces.


Figure 3: Illustration of the wheel attachment to the base support.
2. Assemble Panel Frames: Connect the vertical support poles and horizontal support bars to form three individual rectangular frames. Use the provided connecting buckles/joints to secure the poles.
3. Attach Fabric Panels: Drape each fabric panel over its corresponding frame. The panels are designed with detachable Velcro for easy attachment and removal. Ensure the fabric is taut and evenly distributed.


Figure 4: Details of the fabric panel features, including waterproof material, plastic buckles for firm connection, and detachable Velcro for easy installation.

4. Connect Panels: Once individual panels are assembled, connect them using the designated joints or hinges. For optimal stability, it is recommended to arrange the panels in a zig-zag configuration.
5. Final Check: Ensure all connections are tight and the divider stands firmly on its wheels.

5. Operating Instructions

Your Spurgehom Rolling Room Divider is designed for flexible use and easy maneuverability.

• Moving the Divider: To move the divider, unlock any engaged wheel locks and gently push or pull the unit to your desired location. The universal wheels allow for smooth movement across various indoor floor types.
• Securing the Divider: Once in position, engage the locks on the four designated wheels to prevent unintended movement and enhance stability.
• Adjusting Configuration: The 3-panel design allows for flexible arrangement. You can extend it to its full width or fold it into various angles (e.g., zig-zag) to suit your space requirements.
• Folding for Storage: The divider can be folded into a more compact form for convenient storage. Simply unlock the wheels and fold the panels together.

Figure 5: The room divider can be flexibly folded and placed in various configurations to adapt to different spaces.

6. Maintenance

To maintain the appearance and functionality of your room divider:

• Cleaning Fabric Panels: Wipe the fabric panels with a dry cloth to remove dust and light dirt. For more stubborn marks, a damp cloth with mild soap can be used, followed by drying thoroughly. The fabric is water-resistant.
• Cleaning Frame: Wipe the metal frame with a dry or slightly damp cloth. Avoid abrasive cleaners.
• Wheel Maintenance: Periodically check the wheels for any debris or hair that might hinder smooth rolling. Clean as necessary.

7. Troubleshooting

If you encounter any issues with your room divider, refer to the following common solutions:

• Divider is Unstable:
  • Ensure all assembly screws and connections are tightened.
  • Verify that the divider is placed on a level surface.
  • Confirm that the locking wheels are engaged when the divider is stationary.
  • Arrange the panels in a zig-zag pattern for enhanced stability.
• Wheels Not Rolling Smoothly:
  • Check for any debris (e.g., hair, lint) caught in the wheels and remove it.
  • Ensure the wheel locks are disengaged when attempting to move the divider.
• Fabric Panel Sagging:
  • Re-adjust the fabric panel on its frame, ensuring the Velcro attachments are securely fastened and the fabric is pulled taut.

8. Specifications

Figure 6: Key dimensions of the Spurgehom 3-Panel Rolling Room Divider.

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Spurgehom customer service directly. Keep your purchase receipt for warranty claims.