1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your new YAOHUIMI Replacement Remote Control for Haier Split Type Room Air Conditioners. Please read this manual thoroughly before using the remote control to ensure proper function and longevity of the device. This remote is designed to be compatible with various Haier AC models, offering a direct replacement for your original unit.
2. Product Overview

Figure 2.1: YAOHUIMI Replacement Remote Control and Wall Mount Case.
This image displays the white replacement remote control for Haier air conditioners alongside its white wall mount case. The remote features an LCD screen showing temperature (24°C) and time (AM 12:00), along with buttons for TEMP (up/down arrows), ON/OFF, SWING, and FAN. The wall mount case is designed to hold the remote control securely, providing convenient storage and accessibility.
The replacement remote control is designed for ease of use, featuring an ergonomic design and clear button layout. It operates on standard batteries and requires no programming for compatible Haier air conditioner models. The included wall mount case allows for convenient storage and easy access to your remote.
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open the compartment.
- Insert two new AAA batteries (not included), ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover, sliding it back into place until it clicks securely.
Important: Always use new batteries and replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.
4. Operating Instructions
This remote control is designed for immediate use with compatible Haier air conditioner models without requiring any complex setup or pairing. Simply point the remote at your air conditioner unit and press the desired function button.
4.1 Button Functions
- ON/OFF: Press to turn the air conditioner unit on or off.
- TEMP ▲ / ▼: Use these buttons to adjust the desired temperature setting. The temperature is displayed in Celsius only.
- FAN: Press to cycle through different fan speed settings (e.g., Low, Medium, High, Auto).
- SWING: Activates or deactivates the automatic swing function of the air conditioner's louvers, directing airflow.
- Other buttons may vary slightly depending on the specific Haier AC model's features. Refer to your air conditioner's manual for detailed function descriptions.
Note: The remote control displays temperature in Celsius only.
5. Maintenance
5.1 Cleaning the Remote Control
- Wipe the surface of the remote control with a soft, dry cloth.
- For stubborn dirt, lightly dampen the cloth with water and a mild detergent, then wipe dry immediately.
- Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the remote's surface or internal components.
5.2 Battery Care and Replacement
- Replace batteries when the remote's response becomes sluggish or the display dims.
- If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
- Dispose of used batteries according to local regulations.
5.3 Storage
Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures. The included wall mount case can be used for convenient and safe storage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding to AC unit. |
|
|
| Display on remote is dim or blank. |
|
|
| AC unit responds intermittently. |
|
|
7. Specifications
- Brand: YAOHUIMI
- Model Number: A420220416-071
- Compatible Devices: Haier Split Type Room Air Conditioners (HSU-09VHK, HSU-12VHJ, HSU-18VHJ, HSU-24VHK, HSU-12HD13, HSU-12HE13, HSU-12HF03, HSU-12HF13, HSU-12HA13, HSU-12HB13, HSU-12HC13, and many more listed in product description)
- Controller Type: Button Control
- Special Feature: Ergonomic design
- Power Source: 2 x AAA Batteries (not included)
- Display: Celsius only
8. Warranty and Support
For any questions regarding the operation, compatibility, or troubleshooting of your YAOHUIMI Replacement Remote Control, please contact the seller directly through the platform where the purchase was made. Please have your order number and product model number (A420220416-071) available when contacting support.
Information regarding specific warranty terms, if applicable, can be obtained from the seller at the time of purchase or by contacting them directly.





