1. Product Overview
This manual provides instructions for the use and maintenance of your YAOHUIMI Replacement Remote Control, designed for various Mitsubishi Electric AC Air Conditioner models. This remote control offers essential functions for managing your air conditioning unit, including temperature adjustment, mode selection, and fan speed control.
Image 1: The YAOHUIMI Replacement Remote Control, showing its ergonomic design and button layout. A wall mount bracket is also visible.
Before use, please verify the compatibility of this remote control with your specific Mitsubishi Electric AC unit model. Refer to the "Compatibility" section for a detailed list of supported models.
2. Setup and Battery Installation
The remote control requires two AAA alkaline batteries (not included) for operation. Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or in the direction indicated by an arrow to open it.
- Insert two new AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Once batteries are installed, the remote control is ready for use. No complex pairing is typically required for this replacement unit; it should function directly with compatible Mitsubishi Electric AC models.
3. Operating Instructions
Familiarize yourself with the buttons and their functions for optimal control of your air conditioner.
- ON/OFF Button: Press to turn the air conditioner unit on or off.
- MODE Button: Cycles through available operating modes such as Cool, Heat, Fan, Dry, and Auto.
- Temperature Adjustment Buttons (▲/▼): Increases or decreases the desired temperature setting.
- FAN Button: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- VANE Button: Controls the vertical swing of the air deflector.
- SMART SET Button: Activates or deactivates a pre-programmed comfort setting.
- TIME Button: Used for setting the timer functions (e.g., ON/OFF timer).
- ECO/COOL Button: Activates an energy-saving cooling mode.
Temperature Display (Fahrenheit/Celsius)
This remote control supports displaying temperature in both Fahrenheit (°F) and Celsius (°C). To switch between these units, locate the specific button or combination of buttons on your remote. Often, this is done by pressing a small recessed button (e.g., "RESET CLOCK" or a dedicated F/C button) or a combination like "MODE" and "TEMP UP" simultaneously. Refer to the display for the current unit.
Image 2: Illustration of the remote control's display showing temperature readings in both Fahrenheit (°F) and Celsius (°C).
4. Maintenance
- Battery Replacement: Replace batteries when the remote's display becomes dim or the remote becomes unresponsive. Always use new AAA alkaline batteries and dispose of old batteries responsibly.
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and corrosion. Store in a cool, dry place away from direct sunlight.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding to AC unit. | Dead or low batteries; Obstruction between remote and AC unit; Remote not compatible. | Replace batteries; Ensure clear line of sight to AC unit's receiver; Verify AC model compatibility. |
| Temperature display is incorrect (e.g., showing Celsius instead of Fahrenheit). | Temperature unit setting is incorrect. | Press the dedicated F/C button or the combination of buttons to switch the display unit (refer to Operating Instructions). |
| Some buttons do not work. | Specific button malfunction; Remote damage. | Check for physical damage; If problem persists, the remote may need replacement. |
6. Specifications
- Model Number: A420220415-BEIGUANG-45
- Brand: YAOHUIMI
- Battery Type: 2 x AAA Alkaline (not included)
- Special Features: Ergonomic design, Fahrenheit/Celsius display toggle
- Max Supported Devices: 1
Compatibility
This remote control is compatible with a wide range of Mitsubishi Electric AC Air Conditioner indoor units and remote control models. Please verify your existing remote control model number or AC unit model before ordering. Known compatible models include, but are not limited to:
- KM06A E12A54426 MSZ-A09NA MSZ-A12NA MSZ-A15NA MSZ-A17NA
- KM06B E12A58426 MSZ-A24NA
- KM06C E12A49426 MS-A09WA MS-A12WA MSY-A15NA MSY-A17NA
- KM06D E12A53426 MSY-A24NA
- KM07J E12C22426 MSZ-A09NA-1 MSZ-A12NA-1 MSZ-A15NA-1 MSZ-A17NA-1 MSZ-A09NA MSZ-A12NA MSZ-A15NA MSZ-A17NA
- KM07L E12C30426 MS-A09WA-1 MS-A12WA-1 MS-A15WA-1 MS-A17WA-1 MSY-A15NA-1 MSY-A17NA-1
- KM07M E12C29426 MSY-D30NA MSY-D36NA MSY-D30NA-8 MSY-D36NA-8 MSY-A24NA-1 MSY-GA24NA MSY-GE24NA NTYWST30A112AA NTYWST36A112AA
- KM08C E12C85426 MSZ-FE09NA MSZ-FE12NA MSZ-FE09NA-8 MSZ-FE12NA-8 MSZ-FD09NA MSZ-FD12NA
- KM09F E12E83426 MSY-GE09NA MSY-GE12NA MSY-GE15NA MSY-GE18NA MSY-GE09NA-8 MSY-GE12NA-8 MSY-GE15NA-8 MSY-GE18NA-8
- KM10A T2W7T7426 MFZ-09NA MFZ-12NA MFZ-18NA
- KM15A E12N91426 MSY-GL18NA-U1 MSZ-GL18NA-U1 NTXWST18A112AA
- KM15B E12N94426 MSY-GL18NA-U1 MUY-GL18NA NTYWST18A112AA
- KM15F U01A04426 MSY-GL09NA-U1 MSY-GL12NA-U1 MSY-GL15NA-U1 NTYWST12A112AA NTYWST15A112AA NTYWST09A112AA
- KM15H E12T16426 MSZ-GL24NA-U1 NTXWST24A112AA
- KM15J E12T17426 MSY-GL24NA-U1 MUY-GL24NA NTYWST24A112AA
- KM16C E12G39426 MSZ-FE09NA MSZ-FE12NA MSZ-FE09NA-8 MSZ-FE12NA-8 MSZ-FD09NA MSZ-FD12NA
- KM16M E2246E426 MSY-D30NA MSY-D36NA MSY-D30NA-8 MSY-D36NA-8 MSY-A24NA-1 MSY-GA24NA MSY-GE24NA NTYWST30A112AA NTYWST36A112AA
- KM18C E1273F426 NTXWST30A112AA MSZ-D30NA NTXWST36A112AA MSZ-D36NA NTYWST30A112AA MSY-D30NA NTYWST36A112AA MSY-D36NA
- KM18D E1277F426 NTXWST30A112AA MSZ-D30NA NTXWST36A112AA MSZ-D36NA NTYWST30A112AA MSY-D30NA NTYWST36A112AA MSY-D36NA
- MP04B E22846426 MS-A08VD-P1 MS-A08VD-P2 MS-A08VD-P3 MS-A10VD-P1 MS-A10VD-P2 MS-A10VD-P3 MS-A13VD-P1 MS-A13VD-P2 MS-A13VD-P3
- E1207E426 MSY-GE09NA MSY-GE12NA MSY-GE15NA MSY-GE18NA MSY-GE09NA-8 MSY-GE12NA-8 MSY-GE15NA-8 MSY-GE18NA-8
- E12611426 MS-07RV-A2 MS-09RV-A2 MS-12RV-A2 MS18RV-A1
7. Warranty and Support
Specific warranty details for this replacement remote control are not provided within this manual. For information regarding warranty coverage, returns, or technical support, please contact the seller or the manufacturer directly through your purchase platform or their official website.
When contacting support, please have your product model number (A420220415-BEIGUANG-45) and purchase details readily available.