ANUOMY Battery Operated LED Light Bulbs with Remote

Product Overview

The ANUOMY Battery Operated LED Light Bulbs provide a versatile lighting solution for areas without traditional wiring. These bulbs offer adjustable brightness and color temperature, controlled conveniently via a wireless remote. They are designed for easy installation into standard E26/E27 fixtures, making them ideal for decorative lighting, power outages, or enhancing spaces like bedrooms, kitchens, and hallways where AC power is not readily available.

Please note that the brightness of these battery-powered light sources may be less intense compared to wired lighting due to power consumption considerations.

Image: Two ANUOMY battery-operated LED light bulbs with their accompanying remote controls. The bulbs feature a standard E26 screw base and a white housing with multiple LED elements. The remotes have buttons for power, brightness adjustment, color temperature (cool/warm), and timer settings.

Key Features

• Wireless Operation: Powered by 3 x AA rechargeable batteries (not included) for 30-60 hours of continuous lighting.
• Remote Control: Includes a wireless remote (uses 2 x CR2032 batteries, included) for convenient operation, featuring a memory function to recall the last light mode.
• Dimmable & Timing Functions: Offers White Light and Warm Light modes. Adjust brightness levels (50% or 100%) and set automatic shut-off timers for 15, 30, 60, or 120 minutes.
• Touch Sensitive: Bulbs can be turned ON/OFF by simply tapping the lens.
• Standard E26/E27 Base: Easily screws into common light fixtures such as floor lamps, pendant lights, wall lanterns, and table lamps.
• Versatile Application: Ideal for non-hardwired fixtures, providing light in areas without AC power supply or during power failures.

Setup

1. Install Batteries in Bulb:

   Unscrew the base of the LED bulb to access the battery compartment. Insert 3 x AA rechargeable batteries (not included) according to the polarity indicators. Securely reattach the base.

   

   Image: A diagram illustrating the dimensions of the ANUOMY LED bulb (E26/E27 base, 7cm/2.7inch height, 8.5cm/3.3inch width) and showing the battery compartment open for 3 AA battery installation. An adapter extension is also shown for larger fixtures.
2. Install Batteries in Remote Control:

   Locate the battery slot on the back of the remote control. Insert 2 x CR2032 button batteries (included) ensuring correct polarity. Close the battery compartment.

   

   Image: A diagram highlighting the battery slot on the remote control, indicating the use of a GR2025 (CR2032) button battery. The battery and its holder are shown separately.

3. Screw into Fixture:

   Carefully screw the battery-operated LED bulb into any standard E26/E27 medium screw base light fixture. If the bulb is too large for the fixture, an E26 adapter extension (not included) can be used.

Operating Instructions

The ANUOMY LED bulbs can be operated via the included remote control or by touching the bulb's lens.

Using the Remote Control:

• Power ON/OFF: Press the Ⓐ (Power) button to turn the light ON or OFF.
• Brightness Adjustment: Use the + and - buttons to fine-tune the brightness. Alternatively, press the 50% or 100% buttons for preset brightness levels.
• Color Temperature: Select between Cool (white light) and Warm (warm white light) modes using the respective buttons.
• Timer Function: Press the 15 min, 30 min, 60 min, or 120 min buttons to set the light to automatically turn off after the selected duration.

Image: The remote control is displayed alongside visual representations of the bulb emitting warm light and white light, demonstrating the color temperature options.

Using the Touch Switch:

• Simply tap the lens of the LED bulb to turn it ON or OFF.

Image: An infographic illustrating various features of the ANUOMY LED bulb, including its touch switch functionality, 100 lumens brightness, 30-60 hour running time, battery operation (3 AA batteries), dimmable capability, and 4 timing functions (15/30/60/120 minutes).

Maintenance

Battery Replacement:

• Bulb Batteries: When the light output diminishes, it is time to replace the 3 x AA rechargeable batteries in the bulb. Follow the battery installation steps in the "Setup" section.
• Remote Control Batteries: If the remote control becomes unresponsive, replace the 2 x CR2032 button batteries. Refer to the remote control battery installation steps in the "Setup" section.
• Always use new batteries of the specified type for optimal performance.

Troubleshooting

Specifications

Warranty and Support

ANUOMY values consumer feedback and support. For any questions, suggestions, or assistance regarding your product, please contact ANUOMY customer service. Specific warranty details may be available upon product registration or by contacting the manufacturer directly.

Please retain your purchase receipt for any warranty claims.