CROBOLL RQ2059
CROBOLL 1:12 Large RC Car Instruction Manual
Model: RQ2059 | Brand: CROBOLL
Introduction
This manual provides essential information for the safe and optimal operation, maintenance, and troubleshooting of your CROBOLL 1:12 Large RC Car. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Package Contents
Verify that all items are present in the package:
- CROBOLL 1:12 RC Car (Green)
- Remote Control Transmitter
- 2 x Rechargeable Lithium Polymer Batteries
- USB Charging Cable
- Screwdriver
- Instruction Manual (this document)

Image: Overview of the CROBOLL 1:12 RC Car and its included accessories, such as the remote control, two batteries, a USB charging cable, and a screwdriver.
Setup
1. Charging the RC Car Battery
- Ensure the RC car is powered off.
- Locate the battery compartment on the underside of the car. Use the provided screwdriver to open it if necessary.
- Connect one of the rechargeable Lithium Polymer batteries to the charging cable.
- Plug the USB charging cable into a standard USB power adapter (5V 2A recommended, not included) or a computer USB port.
- The charging indicator light on the USB cable will typically show red during charging and turn off or change color when fully charged.
- Charging time is approximately 2.5-3 hours for a full charge.
- Once charged, disconnect the battery and install it securely into the car's battery compartment. Close the compartment.

Image: Illustration of the two rechargeable batteries included with the RC car, highlighting their role in providing extended play time.

Image: A detailed view of the RC car's battery, labeled RC260RA-2765-38V, indicating its placement within the vehicle.
2. Installing Remote Control Batteries
- Open the battery compartment on the back of the remote control.
- Insert 2 x 1.5V AAA batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment.
3. Pairing the Remote Control
- Ensure both the RC car and the remote control are powered off.
- Turn on the RC car. The car's indicator light may flash.
- Turn on the remote control. The remote's indicator light will flash.
- Wait a few seconds for the remote control and car to automatically pair. The indicator lights on both devices should become solid, indicating a successful connection.
- If pairing fails, turn off both devices and repeat the process.
Operation
Remote Control Functions

Image: A visual guide to the remote control, illustrating the "Lift/Lower Button" for adjusting car height, the steering wheel for "Left" and "Right" turns, and the trigger for "Forward" and "Backward" movement. The image also highlights the 2.4GHz long-distance capability.
- Forward/Backward: Use the trigger on the remote control. Pull to move forward, push to move backward.
- Left/Right Steering: Rotate the steering wheel on the remote control to turn the car left or right.
- Lift/Lower Function: Press the dedicated button on the remote control to switch between On-Road and Off-Road driving modes, which adjusts the car's body height.
- Steering Angle Trim: If the car veers left or right when driving straight, use the trim adjustment dial on the remote control to fine-tune the steering angle until it drives straight.
Driving Modes
The CROBOLL RC Car features two distinct driving modes, adjustable via the remote control's lift/lower button, to optimize performance across different terrains.

Image: The RC car demonstrating its two driving modes. The top image shows the "On-Road Mode" with a lower body height (1.2 inches clearance), suitable for smoother surfaces. The bottom image shows the "Off-Road Mode" with a raised body height (2.4 inches clearance) and an increased climbing angle of up to 75°, ideal for navigating rocks and uneven terrain. This illustrates the one-button body height adjustment feature.
- On-Road Mode: The car's body is lowered, providing a more stable and agile experience for flat surfaces like pavement, grass, or smooth dirt roads.
- Off-Road Mode: The car's body is raised, increasing ground clearance and allowing for better navigation over obstacles such as rocks, stones, and uneven terrain. This mode enhances the car's climbing ability.

Image: A side-by-side comparison illustrating the visual difference between the RC car in "On-road Running" mode (lower chassis) and "Off-road Running" mode (raised chassis).
Driving Environment
The CROBOLL RC Car is designed for various terrains, including sand, highway, grass, and stone. Avoid driving in deep water or extremely muddy conditions to prevent damage to electronic components.

Image: The CROBOLL RC car depicted in various environments, demonstrating its adaptability to different terrains such as sand dunes, paved highways, grassy fields, and rocky paths.
Safety Precautions
- Always operate the RC car in open areas, away from people, pets, and obstacles.
- Do not operate near public roads or in crowded places.
- Avoid driving in wet conditions or through puddles to protect electronic components.
- Supervise children during operation.
- The car features auto-protection functions for over-heating, over-current, and auto cutoff to ensure safety.
Maintenance
- Cleaning: After each use, especially when driven off-road, gently clean the car to remove dirt, dust, and debris. Use a soft, dry cloth or a small brush. Avoid using water or chemical cleaners directly on electronic parts.
- Battery Care:
- Always disconnect and remove the battery from the car when not in use.
- Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
- Do not overcharge or over-discharge batteries.
- If the car will not be used for an extended period, charge the battery to approximately 50% before storage.
- Storage: Store the RC car and remote control in a dry, cool place, away from direct sunlight and moisture. Remove batteries from both the car and remote if storing for long periods.
- Component Check: Periodically inspect the wheels, suspension, and body for any loose parts or damage. Tighten screws as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not respond to remote. |
|
|
| Short operating time. |
|
|
| Car drives crooked. |
|
|
| Car stops unexpectedly. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | RQ2059 |
| Scale | 1:12 |
| Product Dimensions | 14.2 x 8.7 x 7.3 inches (36 x 22 x 18.5 cm) |
| Item Weight | 3.52 pounds (1.6 kg) |
| Drive System | 4WD |
| Frequency | 2.4GHz |
| Control Distance | Up to 265 feet (80 meters) |
| Max Speed | 20 km/h |
| Car Battery | 2 x 7.4V 1200mAh Lithium Polymer (included) |
| Running Time | Up to 60 minutes (with 2 batteries) |
| Charging Time | Approx. 2.5-3 hours (with 5V 2A charger) |
| Remote Control Battery | 2 x 1.5V AAA batteries (not included) |
| Recommended Age | 6 - 10 years |
| Material | ABS + UV Shell |

Image: An exploded view of the CROBOLL RC car, detailing its key components such as the front bumper, ABS+UV shell, anti-slip tires, powerful motor, shock absorbers, and the tool-free battery compartment. Dimensions of 14.2 inches length and 8.7 inches width are also indicated.
Warranty and Support
CROBOLL offers a 60-day after-sales service for this product. If you encounter any issues or have questions regarding your RC car, please contact CROBOLL customer support for assistance.
For further information or support, please refer to the official CROBOLL website or contact their customer service channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.