DIGITMON 10FT US 2-Prong AC Power Cord User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your DIGITMON 10FT US 2-Prong AC Power Cord. This cable is designed as a replacement power solution for compatible electronic devices, ensuring reliable power delivery.

Please read this manual thoroughly before using the product to ensure proper installation and to understand its features and specifications.

2. Product Features

• Length: 10 feet (3 meters) for extended reach.
• Connector Type: Standard US 2-prong polarized male-to-female connector.
• Gauge: 18 AWG (American Wire Gauge) for efficient power transmission.
• Certification: UL Certified, ensuring safety and quality standards.
• Compatibility: Designed to fit most 2-port power adapters.
• Material: Constructed from durable, high-quality materials for longevity.

3. Compatibility

This DIGITMON 10FT US 2-Prong AC Power Cord is specifically compatible with, but not limited to, the following devices:

• Sony ZS-PS50 Portable CD Player Boombox
• Sony ZS-PS50B Portable CD Player Boombox

It is also suitable for other devices that require a standard US 2-prong polarized power cord. Please verify your device's power input requirements before use.

4. Setup and Installation

Follow these steps to properly set up and install your power cord:

1. Identify the Power Input: Locate the 2-slot power input on your compatible device (e.g., Sony ZS-PS50/ZS-PS50B). Ensure it matches the polarized female end of the DIGITMON power cord.
2. Connect to Device: Gently insert the female end of the power cord into the device's power input port. Ensure a snug and secure connection. Do not force the connector if it does not fit easily.
3. Connect to Power Outlet: Insert the US 2-prong male plug of the power cord into a standard US wall outlet (120V AC). Ensure the outlet is easily accessible and not overloaded.
4. Verify Connection: Once both ends are connected, your device should receive power. Refer to your device's manual for specific power-on procedures.

5. Operating Instructions

The DIGITMON 2-Prong AC Power Cord functions as a direct power supply. Once connected to a compatible device and a live power outlet, it provides the necessary electrical current for your device to operate. There are no specific operational controls on the cable itself.

Always ensure the cable is not kinked, pinched, or placed under heavy objects during operation to prevent damage and ensure consistent power flow.

6. Maintenance and Care

To ensure the longevity and safe operation of your power cord, follow these maintenance guidelines:

• Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cable and connectors with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, coil the cable loosely. Avoid tight coiling or bending at sharp angles, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the cable for any signs of damage, such as cuts, fraying, exposed wires, or bent prongs. If any damage is observed, discontinue use immediately and replace the cable.
• Handling: Always pull from the plug head, not the cable itself, when disconnecting from an outlet or device.

7. Troubleshooting

If you encounter issues with your power cord, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, please contact DIGITMON customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support regarding your DIGITMON power cord, please refer to the product packaging or contact DIGITMON customer service directly. Contact details can typically be found on the manufacturer's official website or through your point of purchase.

DIGITMON Customer Service: Please visit the DIGITMON Store on Amazon or contact the seller directly for assistance.