Faaftech SP26 Shiftpower 4.0+ Throttle Response Controller User Manual

Introduction

The Faaftech SP26 Shiftpower 4.0+ Throttle Response Controller is designed to enhance your vehicle's driving experience by eliminating throttle lag and providing customizable acceleration response. This device offers immediate response and precision control, allowing you to tailor your vehicle's performance to various driving conditions and personal preferences. It integrates seamlessly with your vehicle's electronic throttle system without altering the engine's ECU or horsepower output.

Key Features

• Immediate Acceleration Response: Eliminates initial throttle lag for a more responsive driving feel.
• 351 Adjustable Settings: Fine-tune your throttle response with 1% increments across various modes.
• Multiple Driving Modes: Choose from Race, Super Sport, Sport, Dynamic, Eco, Valet, and Lock modes.
• Three Acceleration Curves: Select between Linear, Dynamic, and Exponential curves for personalized control.
• Smartphone Application: Maximize personalization using the integrated Bluetooth and smartphone app (iOS and Android).
• Auto Unlock and Valet Mode: Features automatic mode switching with Bluetooth detection.
• Throttle Lockout: Provides an additional layer of security for theft prevention.
• Easy Plug-and-Play Installation: Simple installation with OEM style connectors, requiring no programming and reversible without vehicle alteration.
• 3-Year Warranty: Ensures peace of mind with your purchase.

Compatibility

The Shiftpower Throttle Response Controller (SP26) is compatible with a range of Toyota and Lexus models. Please verify your specific vehicle's compatibility before installation.

Compatible Models:

• Lexus: 2008-2014 ISF, 2008-2013 IS 250, 2008-2013 IS 350, 2010-2023 GX 460, 2007-2017 LS 460, 2008-2021 LX 570, 2010-2012 HS 250h, 2013-2015 RX350
• Scion: 2011-2016 tC, 2008-2014 xB
• Toyota: 2010-2023 4Runner, 2009-2013 Corolla, 2008-2021 Landcruiser, 2010-2015 Prius, 2012-2016 Prius v, 2006-2012 RAV4, 2008-2022 Sequoia, 2011-2014 Sienna, 2007-2021 Tundra, 2013 Yaris Sedan, 2009-2016 Venza (3.5L V6 Engine)

Setup and Installation

The Shiftpower controller is designed for a straightforward plug-and-play installation. No special tools or programming are required.

Installation Steps:

1. Prepare Vehicle: Ensure your vehicle is turned off and the key fob is at least 30 feet away. Open the driver's side door and leave it open for approximately 15 minutes to allow the vehicle's ECU to fully shut down.
2. Locate Accelerator Pedal Sensor: Identify the accelerator pedal position sensor, typically located above the gas pedal.
3. Disconnect Stock Harness: Carefully disconnect the vehicle's stock harness from the accelerator pedal sensor. This usually involves pressing a tab or lever to release the connector.
4. Connect Shiftpower Harness: Plug one end of the Shiftpower controller's harness into the accelerator pedal sensor. Then, plug the vehicle's original harness into the other end of the Shiftpower harness. Ensure both connections click securely into place.
5. Secure Controller: Use the provided zip ties or double-sided tape to secure the Shiftpower module and its wiring in a safe location, away from moving parts or pedals.
6. Mount Control Button: Attach the small illuminated control button in a convenient location on your dashboard using the adhesive backing.

Figure 1: Faaftech SP26 controller with harness connectors.

This image shows a close-up of the Faaftech SP26 Shiftpower controller, highlighting its compact design and the two main harness connectors. These connectors are designed for inline installation with your vehicle's accelerator pedal sensor, ensuring a secure and direct connection.

Operating Instructions

The Shiftpower controller can be operated via its physical button or through the dedicated smartphone application.

Smartphone Application:

Download the "Shiftpower" application from the iOS App Store or Google Play Store. Connect your smartphone to the Shiftpower device via Bluetooth to access all settings and modes.

• Mode Selection: The app allows you to easily switch between various driving modes: Race, Super Sport, Sport, Dynamic, Eco, Valet, and Lock.
• Fine-Tuning: Adjust the throttle response within each mode in 1% increments, offering 351 distinct settings.
• Acceleration Curves: Choose from Linear, Dynamic, or Exponential acceleration curves to match your driving style.
• Eco Mode: Optimize fuel efficiency with adjustable gas savings from 0-20%.
• Valet Mode: Limits throttle acceleration, ideal for when your vehicle is being parked by a valet or at a car wash.
• Lock Mode: Disables the throttle pedal function, acting as an anti-theft measure.

Figure 2: Shiftpower App - Race Mode. This screen displays the Race mode, indicating a high level of throttle response (85%) for maximum acceleration.

Figure 3: Shiftpower App - Super Sport Mode. The Super Sport mode interface, showing a 75% throttle response setting, suitable for spirited driving.

Figure 4: Shiftpower App - Sport Mode. This image illustrates the Sport mode, set at 50% throttle response, offering a balanced performance for daily driving with enhanced responsiveness.

Figure 5: Shiftpower App - Dynamic Mode. The Dynamic mode interface, showing a 25% throttle response, providing a smoother yet more engaging driving experience than stock.

Figure 6: Shiftpower App - Eco Mode. This screen shows the Eco mode, set at 0% throttle response, designed to maximize fuel efficiency.

Figure 7: Shiftpower App - Valet Mode. The Valet mode interface, showing a limited 45% throttle response, ideal for restricting vehicle performance when entrusted to others.

Figure 8: Shiftpower App - Locked Mode. This image displays the Locked mode, indicating that the throttle pedal is disabled for enhanced vehicle security.

Figure 9: Shiftpower App - Settings Menu. The settings menu within the Shiftpower app, providing options for mode settings, vehicle selection, illumination, safety features, legal terms, technical support, and product information.

Figure 10: Shiftpower App - Mode Settings. This screen shows the detailed mode settings, allowing users to adjust the percentage of throttle response and select between Linear, Dynamic, and Exponential acceleration curves.

Physical Control Button:

The small illuminated button allows for quick adjustments without the need for your smartphone. Press the button to cycle through the main driving modes. The button's color will change to indicate the currently selected mode.

Maintenance

The Faaftech SP26 Shiftpower controller requires minimal maintenance. Ensure all connections remain secure and free from debris. Periodically check for app updates to ensure optimal performance and access to the latest features.

Troubleshooting

• Device Not Responding: Check all harness connections to ensure they are fully seated. Verify the vehicle's ECU has completely shut down before installation.
• App Connectivity Issues: Ensure Bluetooth is enabled on your smartphone and the Shiftpower device. Try restarting both the app and your phone.
• Unexpected Throttle Behavior: Recheck installation steps. Ensure the correct mode and settings are selected in the app or via the physical button.
• No Power to Device: Confirm the device is correctly plugged into the accelerator pedal harness.

For further assistance, refer to the detailed troubleshooting section in the full user manual or contact Faaftech customer support.

Specifications

• Brand: Faaftech
• Model: SP26
• Product Type: Throttle Response Controller
• Connectivity: Bluetooth (for smartphone app)
• Adjustable Settings: 351 (1% increments)
• Driving Modes: Race, Super Sport, Sport, Dynamic, Eco, Valet, Lock
• Acceleration Curves: Linear, Dynamic, Exponential
• Installation: Plug-and-Play, OEM style connectors

Warranty and Support

The Faaftech SP26 Shiftpower 4.0+ Throttle Response Controller comes with a 3-Year Warranty. For warranty claims, technical support, or any product-related inquiries, please contact Faaftech customer service through their official website or the contact information provided in the product packaging.