Robo Alive Dino ACTIONREX 7171 Instruction Manual

Introduction

The Robo Alive Dino ACTIONREX is an interactive robotic dinosaur toy designed to mimic the movements and sounds of a real dinosaur. This manual provides essential information for the safe and proper use, setup, and maintenance of your ACTIONREX dinosaur.

Image: The Robo Alive Dino ACTIONREX toy, a red T-Rex, displayed in its retail packaging. The packaging highlights its "Dino Action" features and "Try Me" button on the tail.

Safety Information

• Age Recommendation: This product is not suitable for children under 36 months (3 years) due to small parts that may present a choking hazard.
• Adult Supervision: Always use this product under the presence and supervision of an adult.
• Battery Safety:
  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
  • Insert batteries with correct polarity (+ and -).
  • Remove exhausted batteries promptly.
  • Do not short-circuit battery terminals.
  • Remove batteries if the product is not used for an extended period.
• Choking Hazard: Keep away from small children and pets.

What's in the Box

Upon opening the package, ensure all components are present:

• 1 x Robo Alive Dino ACTIONREX Dinosaur

Note: 3 AAA batteries are required for operation and are not included.

Setup

Battery Installation

1. Locate the battery compartment on the underside of the dinosaur.
2. Using a small Phillips head screwdriver (not included), unscrew the battery compartment cover.
3. Insert 3 new AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Replace the battery compartment cover and secure it with the screw.

Initial Activation

Once batteries are installed, the dinosaur is ready for operation. There may be an ON/OFF switch, typically located near the battery compartment or on the dinosaur's body. Set it to the "ON" position.

Operating Instructions

The Robo Alive Dino ACTIONREX is designed for interactive play. Follow these steps to activate its movements and sounds:

1. Activate Movement and Sound: Gently press or trigger the dinosaur's tail. This action initiates its dynamic movements and roaring sounds.
2. Observe Actions: The dinosaur will move its body, its arms will cling, and its jaw will open wide to emit realistic dinosaur sounds.

Image: A close-up side view of the Robo Alive Dino ACTIONREX, a red T-Rex, showing its tail in motion with motion lines indicating movement. This illustrates how to activate the toy.

Image: A side view of the Robo Alive Dino ACTIONREX, a red T-Rex, with its mouth wide open, revealing its teeth and tongue. This demonstrates the roaring and jaw action feature.

Maintenance

• Cleaning: Wipe the dinosaur with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Avoid submerging the toy in water.
• Storage: Store the dinosaur in a cool, dry place away from direct sunlight when not in use. Remove batteries if storing for extended periods.
• Avoid Impact: Do not drop or subject the toy to strong impacts, as this may damage internal components.

Troubleshooting

Specifications

• Brand: Robo Alive (by ZURU)
• Model Name: ACTIONREX
• Model Number: 7171
• Toy Figure Type: Action Figure
• Material: Plastic
• Dimensions (L x W x H): 10.63" x 3.94" x 5.91" (27cm x 10cm x 15cm approx.)
• Weight: 0.3 Kilograms
• Power Source: 3 x AAA Batteries (not included)
• Recommended Age: 36 months (3 years) to 60 months (5 years)
• Additional Features: Sound, Dynamic Movement

Warranty and Support

Information regarding product warranty and customer support was not available in the provided product data. For warranty details, technical assistance, or to contact customer service, please refer to the official ZURU or Robo Alive website, or contact your retailer.

You can visit the Robo Alive Store on Amazon for more product information.

Official Product Videos

No official product videos were provided in the available data for this instruction manual.